How to use tile adhesive?

Soak the tile in water first, add a certain amount of water to the tile adhesive during the period, add other powders at the same time, stir evenly with a professional electric mixer, apply the tile adhesive on the back of the tile, and paste the tile adhesive on the wall or ground. In the early stage of solidification, it is necessary to pay attention to the adjustment of the position of the tile, and wait for it to be solidified. I perform hook seaming, beauty sewing work.

According to the traditional way of laying tiles, workers will use cement mortar, but cement mortar will cause pollution to the indoor environment, and the construction will be more complicated, will delay time, so now many people will take tile adhesive, what kind of material is this ceramic tile adhesive? What advantages does it have over cement mortar? How do you use it?

1. What is the material of tile adhesive?

1. Tile adhesive is a material specially used for laying tiles or wall tiles, using high-quality cement, adding other additives or dry powder polymer, and stirring evenly after a certain ratio to form a composite tile adhesive material.

2. The biggest advantage is that it is green and environmentally friendly, and will not be toxic and harmful substances, so it has gradually replaced the traditional cement mortar as the best choice for bonding materials.

Second, the advantages of ceramic tile adhesive compared with cement mortar.

1. When choosing tile adhesive construction, you will find that its thickness is generally 2-4 mm, if it is laid with traditional cement mortar, the thickness of condensation is relatively high, up to 15-30 mm, so relatively speaking, it is more economical than cement mortar, but the bonding effect is very good, so that the overall construction will be faster.

2. The choice of tile adhesive construction will not cause any impact on the environment, and the components of this material itself are relatively environmentally friendly and healthy, so it is a new type of green material. However, if you choose cement mortar, you need to choose the appropriate material, and any of them should be mixed according to a certain ratio, which will cause pollution to the room.

Third, how to use tile adhesive.

1. Workers will choose the back adhesive method to use tile adhesive, which needs to soak the tile in water, add a certain amount of water to the tile adhesive for stirring, and also add other powders.

2. It is best to use a professional electric mixer to stir evenly, and then apply it on the back of the tile, paste it on the wall or ground, and in the early stage of solidification, it is also necessary to adjust the tile position, and wait until it is dry, and then it can be put into use after the tile is caulked.

Because of its relatively stable nature and high strength, and the health of this material, it is widely used in the market and is favored by many owners and decoration workers.

Ceramic tiles are an indispensable building material for decoration, and they should be there when laying tilestile adhesivestile adhesivesIt is an environmentally friendly product made of environmentally friendly polymer matrix composites. How to use tile adhesives.

1. Clean up dirt, oil, mud and other loose materials on the construction site. Be careful with this process. This is because leaving these materials behind can affect the bonding effect of the tile adhesive.

If the stability of the base layer is poor and the tensile strength is insufficient, the base layer should be strengthened and the surface of the base layer should be firm and flat.

tile adhesivesAfter treating the base layer, the surface is coated with mortar pyrolysis, and the purpose of applying the mortar crack inhibitor is to improve the crack resistance and waterproofness of the base layer. If the construction site is the wall of the bathroom, the absorption rate of the wall is very high, so the bottom seal must be made with mortar crack prevention. Otherwise, it is easy to be affected by moisture after using tiles.

tile adhesivesDo not use it directly on tile adhesive, instead, it needs to add a certain amount of water and bite it before using it for construction. Other substances cannot be added only with water.

4. The base layer is well treated, and the tile adhesive can be stirred after application.

5. When everything is ready, you can place the tiles in order. Once the installation is complete, the tile adhesive abrasive mask will dry out, and you should wait before using it. Secondly, attention should be paid totile adhesivesuse.

1. Add other materials, some people are usingtile adhesivesWhen other materials are added, this is wrong. Therefore, it is recommended to use tile adhesive for finished products. They are affected when other materials are added during processing.

Bonding will not only empty the tile, but also severely reduce the tile.

2. Mixing error, in order to facilitate construction, please stir the tile adhesive before use. When mixing glue, the glue should not be placed on the floor or shaken in a tool. If it is placed on the ground, the chemical composition of the tile adhesive itself is lost and the bond strength is reduced.

Shaking the tool spatula can cause irregular mixing and affect consistency. Therefore, stirredtile adhesivesIt must be stirred by an electric motor, so that not only does the smile mix evenly, but also the viscosity is better, so the construction effect is increased.

You can get it for free

Ceramic tile is an indispensable building material for decoration, and when laying tiles, the existence of tile adhesive must be very necessary. Tile adhesive is a high-quality environmentally friendly polymer cement-based composite material, which is a green and environmentally friendly product. So how to use tile adhesive?

What are the precautions when using tile adhesives? Let's follow me to find out.

1. How to use tile adhesive.

1. Clean up the dust, oil, mud and stones and other loose materials in the construction area. This process must be done carefully, because if these substances remain they will affect the bonding effect of the tile adhesive. If the stability of the base layer is not good and the tensile strength is not enough, the base layer should be reinforced, and the surface of the base should be strong and smooth.

2. After the base layer is treated, apply a layer of mortar anti-cracking agent on the surface.

The purpose of applying mortar anti-crack agent is to improve the crack resistance and waterproofing of the base layer. If the construction site is the wall of the bathroom, because the water absorption rate of the wall is very large, it is necessary to apply mortar anti-crack agent for back covering, otherwise the tiles are very easy to fall off after a period of use.

3. Tile adhesive cannot be used directly.

Instead, a certain amount of water needs to be added and stirred evenly before it can be used in construction. You only need to add water, and any other substances are not allowed.

4. After the base layer is well processed and the tile adhesive is stirred, the construction can be carried out.

When everything is ready, it's time to put the tiles in turn. After the installation is completed, it must be put into use only after the tile adhesive is completely dry.

Second, the precautions for tile adhesives.

1. The best construction temperature of ceramic tile adhesive is 5 to 35, while avoiding too much moisture, and it is important to maintain the ventilation and breathability of the construction site.

2. The method of blending and stirring tile adhesive is to add a certain amount of water to the mixing barrel first, and then increase the adhesive step by step, and the ratio of water and tile adhesive is 1:4. An electric agitator is used for mixing, and a low speed (300r min) is used until the binder is homogeneous.

3. The stirred binder should be stirred every half an hour and used up within 4 hours.

4. When using tile adhesive, first scrape a small amount of adhesive on the back of the tile with a toothed spatula, and then paste it on the surface of the Jiqing resistant covering, and press it hard a few times to ensure the bonding strength. Make sure that each tile is in the right place and do not move it for 15 minutes after it is attached.

Summary: The above is my introduction to how to use tile adhesive and the precautions for using ceramic tile adhesive, after reading this article, do you have a more comprehensive understanding of tile adhesive, you must master the correct way to use it.