How to choose tiles? How should you choose tiles?

Ceramic tiles are a must-have for home decoration, determine the beauty of a home decoration, now teach you 5 tips for choosing tiles.

No. 1: Look at the appearance of the first when we go to choose tiles, the most intuitive way to distinguish the good from the bad is to look at its appearance, the appearance of the tile color is uniform and complete, and the color is clear and beautiful. And the surface is flat and there is no concave place, and the edge is also more regular, so the tile is better, we must pay attention to it when buying.

No. 2: Listen to the sound If you want to choose a good quality tile, you must also learn to distinguish the sound made by the tile. You can use a hard object such as a small hammer to hit the tile, if the sound is more crisp, it proves that ***, if the sound is dull and muddy, then such a tile should not be chosen.

No. 3: drip beads want to buy home tiles more durable, then we have to check the water absorption rate of the tile, you can drop a few drops on the back of the tile, if the water droplets spread out after the absorption rate is particularly slow, then prove that the water seepage rate of the tile is not high, prove that the density of the tile is compact, so that the tile can be bought, otherwise do not buy.

No. 4: Detect the hardness The hardness of the tile also determines the quality of the tile, it must be that the harder the tile, the longer the service life will be. The method of detection is that we can use the sample of two tiles, let the water chestnut attack each other, and then observe whether the tile is scratched or powder, the hardness of the powder is relatively low, this kind of don't buy.

No. 5: Measure the side length when buying tiles, we must bring a ruler to measure the side length of the floor tiles, the higher the accuracy of the side length of the floor tiles, the better the effect of paving, and the more beautiful it will be.

Here are a few ways to choose tiles for reference:

Put 4 tiles of the same batch on the flat ground and splic, put the tiles diagonally flat, and observe whether there is a warping phenomenon at the opposite corners to ensure the flatness and aesthetics after paving.

Scratch a few times on the surface of the tile with a sharp tool such as a key, if there are obvious scratches, it means that the wear resistance of the tile is not high, if the surface is intact after scratching, it means that the wear resistance of the tile is higher.

Use an oil-based pen to draw a few strokes on the tile, wait for a few minutes, gently wipe it with a rag or paper towel, if it can be wiped off smoothly, it means that the tile has good stain resistance and is easy to clean.

When choosing ceramic tiles, not only to consider the convenience of cleaning, practical and non-slip, but also in terms of aesthetics is also a problem that can not be ignored, choose a beautiful tile, can make the sense of space appear more elegant and atmospheric, here to the landlord recommended beautiful tiles, beautiful and easy to use.

Look at the abrasion resistance, slip resistance and dirt resistance of the tiles. The tiles are different for different subjects.

1. The wear resistance and anti-slip properties of the whole brick are good, but they are easy to get dirty. Suitable for balconies, kitchens, bathrooms.

2. The surface of the polished tile is smooth, the hardness is high, and it is not easy to scratch. Suitable for living rooms, background walls and balconies. However, due to its weak stain resistance, it is not suitable for kitchens and bathrooms.

3. The surface of vitrified bricks is smooth, wear-resistant and stain-resistant. Compared with other kinds of tiles, the slip resistance is relatively poor. Suitable for living rooms and foyers.

4. Antique bricks have high strength and wear resistance. However, it is a test of the design control ability and laying effect. Suitable for living rooms, bedrooms and balconies.

Of course, in addition to looking at the material and functional scope of application, also look at the brand and after-sales service. It is best to choose a big brand with a good reputation.

<><How should you choose tiles? 1. Maintain a high-level sense of transparencyHow to create a sense of luxury in the living room can make the hard decoration of the living room simpler, and the texture is not fancy, so that the space is left blank, and the delicate texture is low-key and unassuming. In this way, the sisters will have more room to play in the later stage of adding soft decoration.

2. The tile specification is recommended to be 750x1500mm

In the living room of most units, it is recommended to use 750x1500mm size tile paving, large-size size paving, reduce the generation of gaps, not easy to hide dirt and dirt, and reduce the cleaning burden; At the same time, the same color sewing agent is used, and it is also spread with the restaurant, and the effect is more realistic and natural.

3. Versatile selection of tiles with low saturation chromaticity.

Soft furnishings, decorations and so on will appear in the living room, these items will have different materials, different colors, different sizes, etc., different combinations have ever-changing feelings, how to place it according to their own minds is not abrupt, this is a test of the base color of the space, with low saturation color tiles to make floor tiles, not only let us be visually comfortable, Que Heng Gao has a gentle feeling. Moreover, they are famous for their versatile colors and inclusiveness, so you don't have to worry about not matching if you want to change furniture.

Here are a few things to keep in mind when choosing tiles:

1.Specifications. First of all, we should consider the size of the tile, and choose the right size of the tile, which can reduce tile cutting and waste.

2.Brick surface quality. There should be no obvious problems such as cracks, cracks, blisters, spots, color differences and so on on the surface of the tile. The visual observation size is more standard, and the quality of tiles with clear patterns is better. Sedan car search.

3.Color and texture. The color and texture of the tiles should be in harmony with the interior decoration style, and the overall effect and color matching should be considered, especially in the case of mixing and matching styles.

4.Stress and abrasion resistance. When choosing ceramic tiles, it is necessary to refer to their pressure resistance and wear resistance, especially in high-frequency places, such as living rooms, corridors, hallways, kitchens, etc.

5.Slip resistance. The friction coefficient of ceramic tile on soft and hard ground is an important indicator to judge the anti-slip performance of ceramic tile. When choosing floor tiles, you need to take into account the safety of the elderly and children in the home.

6.** and services. It is necessary to choose tiles with good quality and reasonable cost performance, and at the same time pay attention to the warranty and after-sales service of ceramic tiles.

In short, the selection of ceramic tiles needs to consider many factors, and you can choose according to your own needs and decoration style. It is recommended to check some store sales data and word-of-mouth reviews before making a purchase to make a better decision.

1. Choose according to your own needs.

Before buying porcelain Shizi bricks, you need to think about where to use them, because the tiles used in different areas are different, and now the tiles on the market can be divided into three categories according to their functions: floor tiles, wall tiles, waist line tiles, according to the type of distinction, mainly: glazed bricks, full-body bricks, non-slip bricks, etc., so you should choose according to your own decoration needs.

2. According to the harmony and coordination of decoration.

Ceramic tiles should be selected according to their own cavity preferences, but also consider whether the color of the tile can be consistent with the interior decoration style, the types and colors of ceramic tiles are very many, so when choosing tiles, we should take into account the integrity of the interior, not because of the personal rent I like this style very much to buy immediately, even if I like it again, but if the interior decoration style does not match, it will reduce the integrity of the interior.

<><How to choose bricks1. Look. When buying ceramic tiles, the main thing is to see whether there are obvious black spots, bubbles, pinholes, and cracks on the surface of the tile. Missing edges, etc., if it is a vitrified clear fiber brick, it also depends on whether it has leakage, leakage, deformation, etc.

After these checks, try how the water absorption rate of the tile is, you can drop water droplets on the back of the tile, if the area of water droplets diffuses is smaller, it means that its quality is better.

2. Shake. If it is a product of the same specification, the texture of the tile is relatively heavy, indicating that its quality and vertical density are relatively good, and conversely, if the feel is light, it means that its quality is average.

3. Listen. You can distinguish its quality by gently tapping the sound of the tile, when knocking are the five fingers of one hand apart, and then hold up the tile, and gently tap the face of the tile with the other hand, if the sound made when knocking is more metallic, it means that the quality of the tile is better; If you buy antique bricks, you can gently tap the middle of the tile with your hands, if the sound is thicker, it means that it has high wear resistance and good quality, if the sound is more muddy, it means that it is of poor quality and low bending strength.

When choosing tiles, we should grasp three degrees:

One is density, in the case of the same volume, it should be heavy and solid, and if you use the bricks by hand to feel heavy, the density is high and the hardness is high; On the contrary, the texture is worse than that of empty town.

The second is water absorption, which is smeared on the back of the brick with a finger and does not feel absorbent, which is regarded as a top grade. If necessary, use ink drops on the brick surface to observe whether there are traces and the depth of ink marks after wiping with a damp cloth to judge the anti-fouling performance.

The third is hardness, which can be checked by knocking on the fragments when purchasing. Quietly take two pieces of bucket transport coarse tiles and knock them gently, if the sound of the bricks is crisp, with some metallic sounds, it indicates that its internal quality is very good, and the hardness is high; If the voice is hoarse, there may be cracks hidden in the brick, and the hardness is not high. Tiles with high hardness are not prone to cracking and deformation for a long time after being paved.

Ask me.

In almost all home decoration, ceramic tiles will be used, and it can be said that ceramic tiles are the necessities of home decoration. So, how to choose tiles? Please read below:

1. Look at the product packaging.

Now the tiles sold on the market are packaged in cartons, and the production name and product name should be printed on the packaging box. Trademarks, specifications, sizes, levels, shades, numbers, etc. Some are also printed with the logo of ISO9000 quality system certification.

The packaging box should also be placed with a product certificate. When purchasing ceramic tiles, be sure to choose products with complete and clear logos, especially pay attention to whether the selected tiles are consistent with the specifications and color numbers marked on the packaging box.

2. Look at the appearance of the product.

When consumers buy ceramic tiles, they can randomly check a few tiles from the packaging box to see if there are any of the following defects on the surface of the product: lack of glaze, spots, cracks, bumps, glaze bubbles, stripping, ripples, etc. Generally, the distance from the porcelain is 3m visual inspection, the defect is not obvious, and does not affect the use of qualified products.

Each tile has a product logo on the back, and there is no obvious drop on the side and back that hinders the adhesion of the glaze and other effects on the use.

3. Look at the color difference.

Because the number of tiles needed in the decoration is usually relatively large, if the tiles have obvious color difference, it will affect the decoration effect, so consumers should sample and compare all packaged products when purchasing tiles, observe the changes in color difference, and the color difference can not be selected. You should also pay attention to whether the color of each box of tiles is consistent, and whether there is any color difference.

4. Listen to the sound of tiles.

To discern the quality of the tiles, in addition to looking, but also listening. When consumers buy tiles, they can use the method of tapping to identify the inherent bad of tiles from the sound.

5. Look at the size.

Finally, consumers also have to check the tiles one by one, the size error is greater than the flatness of the product, not only will increase the difficulty of construction, but also the effect after decoration is also poor, can not be used in the project.

If you have time, you can go to Kunming** online to learn about it, and there are some building materials activities in the near future.

Nowadays, all over the world, automated production technology is used, and human hands are only used to operate equipment. As in the past, ceramic tiles are used for decoration both indoors and outdoors.

How to choose tiles? Star Awareness Project