What should I do if the wire box with tiles has a big taste?

The problem is that the tile, iron self-specialization, tile tearing, tiling, tile box buckle, tile, tile box mouth is a bit big, what should I do? In this case, I think you only, paste tiles, the mouth of the tile box is a bit big, what should I do? For this situation, I think you can only find a plastic sleeve, and then realize the mouth shrinking, tiling, the tile box mouth is a bit big, what should I do?

For this case, I think you can only find a plastic sleeve, and then realize the mouth reduction, so maybe it will be good, tiling, the tile box mouth is a bit big, what should I do? In this case, I think you can only find a plastic sleeve and make the mouth smaller, which may be better.

Cut a small strip of tiles and glue them with white cement. If the cut is not very large, just wipe the mouth with white cement, and plain ash can be.

Or use white latex to stir and scrape the white paint to wipe the mouth, and you can install the switch socket after drying, and the white latex scrape the white paint after it is dry, it is moisture resistant.

Paste tiles, the wire box mouth of the tile feels big, what should I do? I think that under normal circumstances, the wire box mouth of the tile feels big, and I think you can Meifeng come to Meimei to Meilaimei.

What should I do if the line box pocket of a special line is in my pocket? I think in general tiled. The line box mouth of the tile feels big, and I think you can put it every time.

What should I do if the line and texture of the tile are large? Personally, I think that if you cut the tile, if his line and taste are weak, there must be a remedy. It means that you can consult a professional.

You can first seal the normal opening with white cement, and this socket should be buckled on the tile, not flat with the tile.

In this case, you only have to fill the edge with cement or wood and install the switch panel, and then attach the switch to play an aesthetic role.

Fill it with putty, and if you don't look good, buy a switch sleeve (that's the kind of fabric) to cover it.

Let the master electrician cover it with a panel.

The tile mouth of the wall socket can be cut and repaired if it is wide, but it is not very beautiful, if you want to be beautiful, it is recommended to replace the tile and re-open.

Ceramic tile and tile are refractory metal oxides and semi-metal oxides, through the process of grinding, mixing, pressing, glazing and sintering, and form an acid-alkali resistant porcelain or stone or other building or decorative materials, which are generally called ceramic tiles. Its raw materials are mostly mixed with clay, quartz sand and so on.

Use marble glue of the same color as the tile or close to it, and paste a small piece of tile on it. After installation, the sewing agent is closed, and it is basically impossible to see.

Didn't you put the furniture? This happens when the room is empty, but when the furniture is put on, it is gone. Our homes are all tiled, and there is no echo when we live in them.

The echo has nothing to do with the tile.。。

Give me 5 points, and it will be gone after you put furniture in your house.

Because furniture absorbs sound.

Put in some plants, and more fabric on the wall will do the trick.

Can be fixed with quick sticky powder!! Or squeeze the wire box with something else and fix it with styrofoam, and wait for the styrofoam to dry and remove the excess glue.

If the smell is strong, buy some air fresheners to fill them up.

Constant ventilation and waiting for the smell to subside is the best course of action.

The smell of the tile is particularly strong, and in the current situation, generally speaking, you can apply for a self-solution, which is a good solution.

Constant ventilation and waiting for the smell to subside is the best course of action.

Put more green plants, green plants can remove the smell, you can put some activated carbon, tea or something.

Cold salad, you can find someone to fix it, this question still needs to be asked, in fact, I am also asking people now.

The developers use low-quality ones, and the national requirements must be flame-retardant material bottom boxes. Type 86 is the size, and the decoration is to locate the switch socket position and embed it before doing hydropower.

After the decoration is completed, there is no need to move, it is very troublesome to change, the wall is damaged, and it needs to be repaired. Kitchen, bathroom replacement to destroy tiles.

Agree with the upstairs statement, as long as the socket works normally, it's OK. In rural areas, 90% of electrical products are counterfeit products, and everyone does not live the same.

Find a self-tapping screw into it is not an electric hammer to install the screw place to make a hole in the bolt into the screw is generally not easy to break in summer and is easier to break in winter.

There is no need to feel that you can't stand it if there are fake and shoddy things, there are more fake and shoddy things in your house, and China is like this, make do with it. Classic.

There is only one way, smash it down and reload. There is no good way.

It is easy to open the hole, if the hole is opened on the edge of the porcelain piece, the porcelain piece is easy to break, and there is a problem of aesthetics.

It's not hard to see why. Do you think it looks good, not in one brick but in the gap between two bricks?

The wire box obviously looks a lot better in a brick.

This is for the convenience of repairs at a later date.

The shape of the sticker should first calculate how many triangles should be on the four sides, and the triangles on both sides should be calculated as follows: Ji Xun long acres of circle divided, width divided, take the integer, get a few pieces of length 1 section 2, width to a few pieces of 1 section 2 middle part :(large area - the total area of the small triangle plate on the side of the collapse of the front of the front) divided by the area of 1 large brick.