Is it necessary to clean the heat, and do the radiators really need to be cleaned?

Of course, heating cleaning is necessary, if the heating is not cleaned for a long time, there will be blockage, if there is a blockage, it will affect the temperature, it will affect the temperature of your home, put it outside minus 20 degrees, your home is only minus 10 degrees, I think it's quite cold, why have heating? It's just a heating one, if he is blocked, she won't be heating, you still need heating, what's the use? Especially geothermal geothermal heat, should be cleaned every year, my home is now geothermal, now it is not as hot as before, it turned out, a foot is hot panic, now, it is a warm pot, so it's necessary to clean the radiator, the money that should be spent has to be drawn, and the money can not be spent in vain, right?

When you're done, you're warm, and you're benefiting, right? How good it is to wear a flower vest at home, you still wear cotton jackets and cotton pants at home.

Cleaning the heating pipes is of course necessary! Even if the tube can't be blocked, the sediment in the tube is getting thicker and thicker, and the thermal conductivity is not good! Directly lead to the increase in the temperature of the return water, the heating company sees the high temperature of the return water, thinking that the temperature of the household's home is too high and is not heating.

Actually, the temperature in your house is very low!

There is a role.

Because there are certain impurities in the hot water in the heating pipe, it will inevitably remain on the pipe wall and precipitate during use, and the longer the pipe is used, the thicker the sediment on the pipe wall, which will affect the circulation of hot water.

The cleaning of heating pipes generally uses pulse cleaning agent and air pump, which can form a strong flow of water and air, which can wash off the dirt inside the pipe, so the cleaning of heating pipes has a certain effect.

It is necessary to clean the radiator regularly to keep the radiator running efficiently and prolong the life of the radiator.

Radiator cleaning method:

2. Open another temperature control valve and continue to flush until the water flowing out is clear, close the temperature control valve, tighten the plug, and then open the valve for inlet and return water, and exhaust; If it is a radiator with a bottom-in and bottom-out installation method, it is the live connection between the valve and the radiator that is opened for washing; For the bathroom radiator, you need to unscrew the exhaust valve on the top of the radiator, and then open the valve to flush it directly to flush the dirty water from the bathroom floor drain.

3. In the heating season, there are often some old users of radiators who respond that the radiators at home are not hot, and they still can't solve it after trying various methods, which may be because of the impact of internal impurities, you may wish to clean according to the methods introduced above, and I believe that the radiators will gradually recover heat dissipation after cleaning.

Reasons why radiators don't heat:

1. The water used in the heating system contains calcium, magnesium salts and other substances such as scale, which is caused by the impact of heat dissipation after long-term use on the pipe wall and the inner wall of the radiator. Because the heat resistance system coefficient of scale substances is dozens of times that of iron, the heat dissipation effect is poor after scale.

2. The heating system is not cleaned before use, and there are debris remaining in the pipe. In the construction process of installing the heating system, there is usually sediment, welding slag and rust in the pipeline, so it must be cleaned before the system is put into use, and the pipe can be put into use only after it is clean and free of debris.

3. Sediment deposition in the water of the heating system. The water contains a certain amount of sediment, and after a long time of continuous replenishment of water into the system, the sediment will continue to concentrate and deposit. As the volume of sediment in the heating system increases, the reduction of water circulation is also a cause of unheated heating.

4. Rust is produced by oxidation inside the pipes of the heating system. Due to the long-term use of the heating system, the water contains oxygen, and after the oxygen corrosion of the pipe wall, the rust will fall off and be deposited in the radiator of the heating system, which will reduce the amount of water circulation.

5. The water contains a de facto amount of oil, and the oil will be concentrated in the system due to the continuous replenishment of water into the system for a long time, and it will be attached to the inner wall of the pipe and the radiator.

Yes! Due to long-term use, there will be some dirt and some rust residue left inside will affect the heat dissipation effect of the radiator, therefore, the radiator must be cleaned and maintained regularly.

It's necessary!

Because regular and correct cleaning and maintenance of the heating system can ensure that the heating system will operate normally and reliably in the next heating season, and that it will be more energy-efficient during use.

At present, the radiator material is mainly steel radiator and copper-aluminum composite radiator, when most of the heating pipes still have residual water after the heating is stopped, in this case, the probability of the radiator being corroded is increased. Generally, the central heating water is specially treated and kept in the system to isolate the air from the inner wall of the pipe and the inner wall of the radiator to prevent the system from being oxidized and corroded, thereby enhancing the corrosion resistance of the system and prolonging the service life. Therefore, when the heating is stopped, the water in the radiator is still good, and the steel radiator needs to be fully maintained in the non-heating season to ensure the safety and performance of the radiator.

Do radiators really need to be cleaned? The radiator does not need to be cleaned for a year or two, there is no problem, and it is still easy to use.

Short-term** Don't clean it because it's iron, and it's clear that you can go all by yourself, and this is not good.

Do radiators really need to be cleaned? If it's not particularly dirty, don't wash it.

Plumbing radiator is a kind of efficient heating equipment, if the plumbing radiator is in operation for a long time, the internal will accumulate and form impurities and dirt, hindering the radiator from dissipating heat well, seriously affecting the indoor temperature. Therefore, it is necessary to clean the inside of the water heating radiator to keep the radiator running efficiently and prolong the service life of the radiator. Let me introduce you to the small details of radiator cleaning.

First of all, you need to close all the inlet and return valves of the water heating radiator, and gently unscrew the plug of the water heating radiator with a wrench. It should be noted here that a basin should be placed under the radiator corresponding to the plug of the water radiator to connect the water flowing out of the flushing radiator (it is best to have another basin to replace the basin that is almost full).

Then, open the temperature control valve of one of the water heating radiators (can be opened and closed, the flushing effect is better) and flush the radiator until the water flowing out is clearer, close the valve, open another temperature control valve and continue to flush, until the water flowing out is also clear, close the temperature control valve, and tighten the plug.

Then open the valve of the water heating radiator inlet and return water, and exhaust it; For the water heating radiator that goes in and out, the valve is connected with the radiator for flushing; For the steel bathroom radiator in the bathroom, you can unscrew the exhaust valve on the top of the radiator, open the valve and flush it directly, so that the dirty water will flow directly from the bathroom floor drain.

Radiators need to be cleaned. Because every year when the heating season comes, the heating company will inject water into the radiator, and in the process of water circulation, it will also enter some rust and impurities, affecting the thermal cycle, if it is cleaned, these impurities will be washed away, so that the heating heat increases.

As a commonly used heating equipment in the home, the heating company will put a lot of anti-scale chemicals into the heating system in order to avoid the occurrence of scale during the heating period every year. Although this measure has played a certain role, it is still easy to show scale phenomenon after using the heating due to poor water quality or other reasons. Many practical examples show that during the use of radiators, a considerable proportion of the radiators are not hot due to the blockage of dust and scale on the inner wall, which not only affects the heating effect of users, but also forms a waste of heat energy.

Therefore, it is necessary to clean the radiator and need to be cleaned regularly.

Dear, hello, I am happy to answer for you: the benefits and disadvantages of floor heating cleaning answer Cleaning floor heating is useful and necessary. 1. Perennial water accumulation in the geothermal pipe, there are microorganisms in the water, and a large amount of biological slime will be produced under certain conditions, which will be covered in the geothermal pipe, and the temperature change of the geothermal heat is caused by the biological slime covering the inner wall of the pipe wall.

At the same time, a large number of bacteria survive, which also poses a hazard to the health of users. 2. Regular maintenance and maintenance are required if the geothermal service life exceeds two heating periods, because the geothermal pipe will have biological slime, impurities and bacteria after use, in order to ensure the cleanliness of the inner wall of the geothermal pipe. To extend the service life of geothermal pipes, regular maintenance and maintenance of geothermal piping systems is inevitable.

3. The indoor temperature of the user's home is obviously lower than the previous indoor temperature, this is because the inner wall of the geothermal pipe produces a large amount of biological slime, according to relevant statistics, in the heating process, every 1mm scale increase on the inner wall of the geothermal pipe will reduce the ambient temperature by 6 degrees, which not only affects the normal temperature, but also causes a waste of energy. 4. The water flow of the geothermal pipe obviously feels that this year is smaller than in previous years: this may be due to the excessive biological slime in the geothermal pipe, which has caused local blockage to the geothermal pipe, and continued use will cause blockage in the pipe.

The only way to solve the problem is to destroy the ground, remove or replace the pipeline system, which will cause you serious property damage and inconvenience. 5. The best cleaning period of the geothermal pipe is the three periods before, during and after heating, because the cleaning before heating can remove the biological slime and impurities in the pipe, so as to ensure the normal use during the heating period. Because the water quality supplied by the water company is generally poor, there are impurities and bacteria in it, and the reproduction and regeneration of bacteria is generally in spring and summer, if it is not completely removed, it will cause great harm to our health.

It is necessary for the following reasons:

1. The impurities generated in the floor heating pipe affect the heating effect and service life. In general, geothermal lines will deposit scale and slime after a heating period. If the pipeline is not effectively cleaned for a long time, the water flow rate will be reduced, the flow rate will be slowed down, and the indoor temperature will also drop significantly. Second, some of them will cause pipeline embolism and cannot be dredged, resulting in permanent failure of geothermal pipelines and irreversible.

2. The bacteria generated in the floor heating pipe affect the health of the body. Due to the perennial accumulation of water in the geothermal pipe, a large amount of biological slime and dirt will be produced under certain conditions, which will be covered in the geothermal pipe, and the temperature change of the geothermal heat will be caused by the biological slime and dirt covering the inner wall of the pipe wall. At the same time, a large number of bacteria survive, which also poses a hazard to the health of users.

Extended information: There is no need to clean the floor heating installation time within two years, and if it is more than two years, it is the filter screen in the filter that needs to be cleaned every year.

Geothermal cleaning pipelines can actually be carried out all year round, if they are cleaned before heating, residents not only need to queue up, but also expensive, some cleaning companies even mislead residents to let a year wash, in order to achieve the purpose of making money.

Geothermal cleaning is generally recommended once every 3 to 5 years. If the water quality of the heating water in the community is better, the cleaning interval can be longer. If the water is turbid, it should be cleaned every 2 to 3 years.

If the heating pipes in the home have been in the house for many years, there will be a lot of dirt in it, which will affect the temperature in the house, so it is very necessary to clean it to make the temperature in the home rise a little.

There is water in the heating pipes all year round, so it will not rust and do not need to be cleaned.

The radiators need to be cleaned, and the radiators sit idle until the next heating season. Therefore, it is essential to clean and protect the radiator before heating. Proper care of the radiator is also essential.

The cleaning method is as follows: when cleaning the surface of the radiator, use a soft towel or brush, do not use any kind of organic solution, and use daily detergents, such as detergent, weak alkaline soapy water, etc.

Find out the material of the heat sink and the appropriate maintenance method for heating. Different materials of heat sink maintenance methods are different, such as steel heat sink generally use full water maintenance method, while aluminum does not need to.

If the radiator is used for a long time, the inside will be corroded, and a large amount of dirt will be deposited at the "dead corner", which will reduce the thermal conductivity and seriously affect the heat exchange effect, so it must be cleaned regularly.

1. When cleaning the surface of the radiator, first moisten the water with a rag and wring it out to wipe it.

2. Therefore, it needs to be cleaned every few years, and it can be cleaned once a year if possible.

3. After a long period of use, a lot of scale will be formed inside the radiator, which will not only affect the heat conduction of the radiator, but also cause the radiator to be blocked.

Underfloor heating heating cleaning benefits and cons: dear, hello, glad of your problem! Wash before heating.

The advantage of cleaning before heating is: it can ensure that the floor heating pipe is spotless in the next heating period, and the heating season can be spent continuously and stably, just like the car has just been maintained, and it is easier to drive and rest assured in the future. The disadvantages of cleaning before heating are:

Because after a long spring, summer and autumn, the water flow in the floor heating is still, and some dirt may adhere to the wall of the floor heating pipe, which is relatively firm, and it is more laborious to clean, and it may be difficult to clean. Cleaning in heating. The advantages of cleaning in heating are:

It can make us fully feel the temperature change before and after the floor heating cleaning, and there is sufficient evidence to prove whether there is a problem in our floor heating system. Disadvantages of cleaning in heating: Choosing cleaning in heating may affect our normal heating in the process of cleaning, and cleaning workers are not easy to find.