What procedures are required for civil air defense equipment factories?

Civil air defense equipment factory is a sole proprietorship or partnership, civil air defense equipment factory does not need to issue registered capital, but can be set up directly, the establishment of the factory before the need to pass the environmental approval.

Take a partnership, for example:

Items: Establishment and registration of partnerships.

Time limit: A decision on approval or non-registration shall be made within 30 working days from the date of acceptance of the application.

Qualifications: Rural villagers, urban unemployed persons (including resigned, retired, unemployed youth, idle persons), retired persons, laid-off personnel of enterprises, and other personnel permitted by national laws, regulations and policies may apply for a partnership business license in accordance with the law.

Application procedures: 1. Written application.

2. Application for establishment registration signed by all partners.

3. Notice of pre-approval of enterprise name.

4. Identification of all partners.

5. Letter of commitment on the professional status of all partners.

6. Personnel from other provinces and cities must provide temporary residence permits.

7. List of employees.

8. Proof of ownership of capital contribution.

9. Partnership agreement.

10. Proof of serving as a partner in the affairs of the executive partnership.

11. Proof of corporate domicile: rental agreement, property right certificate, and non-proof of residence change.

12. To engage in the industry or business scope specified by the state, the approval documents of the relevant departments shall be submitted.

13. Power of attorney (including information table) from the representative designated by all partners or the ** institution jointly entrusted

Handling procedures: acceptance, review, approval, and licensing.

Basis: Partnership Enterprise Law of the People's Republic of China (promulgated by Order No. 82 of the President of the People's Republic of China on February 23, 1997).

Administrative Measures of the People's Republic of China for the Registration of Partnership Enterprises (promulgated by Order No. 236 of November 19, 1997).

The applicant for the air defense equipment factory was approved by the State Civil Air Defense Office and reported by the local Civil Air Defense Office

There are the following points

1. A list of incoming materials (indicate where they are used).

2. The quality assurance documents of the materials (such as: certificates, quality certificates, and quality certificates) are generally provided by the best material suppliers.

3. The materials that must be inspected shall be reported before the use of the material test report, which means that the materials entering the site shall be sampled or retested in accordance with the relevant regulations, and even witness sampling is required.

4. Finally, attach the declaration form for the use of materials to the construction unit.

Or the supervision unit for inspection.

What kind of good reputation is needed for civil air defense acceptance.

When the civil air defense is accepted, what we need to provide is the construction permit of the relevant construction project.

The acceptance report of the completion of the civil air defense project, as well as the survey report design, the drawing design plan, and the project quality report of the supervision unit.

In addition, we also need to provide the archives of the civil air defense engineering and technology department, as well as the completion and acceptance of the humanistic project.

These data are all materials for the acceptance of civil air defense projects.

Hello, you have the following points: 1. List of entry materials (indicate where to use). Yuanxun 2, the quality assurance documents of the materials (such as: certificates, quality certificates), this is generally provided by the material supplier.

3. The materials that must be inspected shall be reported to the material test report before the use of Yefeng, which means that the materials entering the site shall be sampled or retested in accordance with the relevant regulations, and even witness sampling is required. 4. Finally, attach the declaration form for the use of materials, and report to the construction unit or supervision unit for inspection. What information is needed for civil air defense acceptanceWhen civil air defense acceptance, we need to provide the construction permit of the relevant construction project, the acceptance report of the completion of the civil air defense project, as well as the survey report design, drawing design plan, and the project quality report of the supervision unit.

In addition to this, we also need to provide the archives of the civil air defense engineering and technology department, as well as the record form for the completion and acceptance of the humanities project, etc., which are all materials for the acceptance of the civil air defense project.

Civil air defense equipment factory is a sole proprietorship or partnership, the civil air defense equipment factory does not need to issue registered capital, but can be set up directly, before the establishment of the factory needs to pass the environmental protection approval. Take a partnership as an example: handle the project:

Time limit for registration of partnership establishment: A decision on approval or non-registration shall be made within 30 working days from the date of acceptance of the application. Eligibility:

Rural villagers, urban unemployed persons (including resigned, retired, unemployed youth, and idle persons), retired persons, laid-off personnel from enterprises, and other persons permitted by national laws, regulations, and policies may apply for a partnership business license in accordance with law. Application procedures: 1. Written application 2, application for establishment registration signed by all partners 3, notice of pre-approval of the name of Pichan enterprise 4, identity certificate of all partners 5, commitment letter of professional status of all partners 6, personnel from other provinces and cities must provide temporary residence permit 7, list of employees 8, proof of ownership of capital contribution 9, partnership agreement 10, certificate of serving as a partner of executive partnership affairs 11, proof of enterprise domicile:

Rental agreements, property rights certificates, non-certificates of residence reform12, and engaging in industries or business scopes specified by the state shall be submitted to the relevant departments for approval1

Summary. What procedures are required for civil air defense equipment factories?

Abstract of the procedure for registering a license.

Step 1: Name approval.

Now the registration of a license application name is carried out online. Step 2: Fill in the materials on the industrial and commercial website.

After the company gets the license, it can engrave the company's seal, and the normal enterprise must engrave 5 seals (official seal, financial seal, legal person child, invoice seal, contract seal.

Step 5: Go to the bank to apply for corporate matching.

With your license and seal, you go to a nearby bank to open a corporate bank account. Step 6: Go to the tax hall for tax identification.

Within one month of obtaining the business license, the company must go to the tax office for collection and appraisal, and must file tax returns on time every month thereafter. By now, the steps of setting up a business are complete and you are ready to run your business.

What procedures are required for civil air defense equipment factories?

What are the procedures required for civil air defense equipment factories Abstract Procedure for registering a license The first step is to approve the name of the registration of a license now and the application for a name is carried out online. Step 2:

You need to fill in the materials online for industry and commerce, you need to submit the name of the enterprise, business scope, investor status, registered address, capital contribution, etc. on the industrial and commercial network, and wait for the review Step 3: Obtain the company license After submitting the information for review, you can go to the Industrial and Commercial Bureau to obtain a business license. Step 4:

After the company engraving the company's seal subsidiary gets the license, you can engrave the company's seal, and the normal enterprise must engrave 5 seals (official seal, financial seal, legal person child, invoice seal, contract chapter The fifth step: go to the bank to apply for the company's public account only the difference you take the license and seal, to the nearby bank to open a corporate bank account. Step 6:

Within one month of obtaining the business license, the tax appraisal company must go to the tax office for collection and appraisal, and must file tax returns on time every month thereafter. By now, the steps of setting up a business are complete and you are ready to run your business.

Hope it helps.