How to take off the vivoy66 tempered film

1. Do not use a blade to scratch the mobile phone screen. Prepare tools, hot water above 80 degrees, a piece of cloth, alcohol (2 yuan for 1 bottle in the drugstore), a little scotch tape. Then start the action and use scotch tape to paste off the horn and microphone to prevent water from entering.

Start to use hot water to heat the screen 7-10 times, you can tear it off by hand, not thoroughly, repeat, wipe off the screen glue with alcohol, tear off the speaker microphone hole tape, paste a new film, it is best to go to the place where the mobile phone is sold and let the family paste it professionally.

2. When taking the tempered film, use the wide tape to stick the top first, and then use your fingernails to scratch it in little by little, and lift the tape to remove the whole tempered glass film.

3. As long as you gently pick the corners of the toughened glass protective film with your fingernails, it will appear a little blister. Then just tear the protection off.

Summary. Hello dear , tear it off directly, and then use a dust-free cloth dipped in distilled water or low-concentration alcohol to wipe it off after turning off the phone to remove the glue on it.

Kiss you to clean the slag well, Qingzheng people directly tear it off, and then use a dust-free cloth dipped in distilled water or low-concentration alcohol to wipe it off after turning off the mobile phone to remove the reputation glue on it.

1 Stick the top with wide tape, scratch it in with your fingernails little by little, and lift the tape to remove the whole tempered glass film. 2 As long as the mobile phone protective film is lightly picked at the corners with your fingernails, it will appear a little blister, and then you can tear it off. 3 You can tear it off with your fingernails directly from the edge of the screen.

Can you tear it off if it's like me?

1. Place the hand-honored machine on the desktop, and remove the mobile phone case and mobile phone buckle before taking it. 2 Gently peel off the corner of the tempered film with your lead nails. 3 If you don't have nails, you can choose to use a non-sharp blade to remove the horns. 4 Remove the membrane along the corner.

That's it, dear. Kiss you, this is a good tear.

My phone is different from others, but the phone film is very thick, can this hiss.

You can tear off the edge with a button.

Pro, this can be torn.

The easiest way to do this is to pick the edges with your fingernails and then you can tear them off.

Or with the help of a blade.

It's hard for me to be so sticky.

Personal use of alcohol. It's good to tear some.

If you want to change the film, you can use a finger nail or toothpick, gently lift a corner along the corner of the film, and then lift the whole piece with a little force in the direction of the film.

If you can't remove the tempered film by yourself, it is recommended to bring your Mofeng mobile phone to the vivo customer service center for processing. You can use this link to find the address of your nearest customer service center and Youmin**. To save your precious time, it is recommended that you call the Customer Service Center in advance to confirm the relevant matters and find out the working hours.

It is an explosion-proof film, not tempered, it is recommended to use it for a period of time and then change, the original film is durable.

1. The correct way is to move in the same direction and then to another direction, so that you can completely clean up the stains and dust on the mobile phone screen, most of the current tempered Sun Ming films are three-layer structure, the top layer is the A side, the middle layer is the B side, that is, the surface that we touch the operation, the bottom layer is the C side, that is, the side that fits the screen, there is a certain stickiness. First tear off the A side and paste it on the screen, then stick the dust on the screen, first uncover the bottom part of the film from any angle, and then align the middle layer of film with the position of the mobile phone, ensure alignment, and then remove the bottom layer of Kai Scramble film, take out the wide adhesive tape we prepared in advance, first use the card to warp the corners of the dust, the adhesive tape is glued between two fingers, slowly approach the dust inside, and then take out the adhesive tape from the side after sticking the dust, and then quickly attach the tempered film to the screen, and it is pasted.

2. The thickness of the tempered film is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

3. The surface is hard enough and scratch-resistant, even if you use a knife to scratch on it, it will not get flowers, because the hardness of iron is lower than that of glass, let alone tempered. Cons: Brittle.

If something so hard is made so thin, it is still relatively easy to break. If it is attached to a mobile phone, the screen is hit hard, and the film itself will crack like glass.