Is the crane easy to learn? How long does it take for a crane apprentice to complete?

If you don't have a long-term plan to run around the construction site, I advise you not to learn the crane The crane is not easy to do I have been driving the crane for four or five years To be honest, this line of work is more profitable than others Now the double certificate is about 6,000 in the southern mountains or coastal cities, taking care of food and housing, but all day long against the crane, you have to do everything yourself, maintain the car.

Butter Repair Car Job! It's like this every day, 24 hours on call, you have to go to wake up at one or two o'clock in the middle of the night to unload the steel bar, you don't have to go to and from work on time, and then the salary is not good, in short, if you want to do this business, think about it yourself, don't start to feel that the salary is high, you want to drive, you choose to drift, you choose to drift, it is impossible to learn to drive a crane in four hours, this thing is not able to operate, it depends on long-term accumulation of experience, how far can this thing be sent, how much can you overload, how much can you not have an accident, all of which depend on long-term accumulation.

The operation is very simple, see if your master teaches you with heart, as long as you have the guts. Go up to get used to it in the first three days, and let the master hold your hand in the middle two days. After three days, do it yourself. 8--10 should be about the same.

I think the crane is still very easy to learn, as long as you study seriously and follow the master well, it is still easy to learn.

As long as you practice well, it is not difficult to obtain evidence, the key is to open well, you need to be slowly proficient in practice and summarize skills!

The words of the crane are also very simple to write, as long as you have perseverance and a lot of interests to practice, you will definitely be very proficient, so you will stick to it, and you will definitely learn very well.

First of all, you should not be afraid to learn the crane, and then learn by heart, it is not difficult, and it will be learned quickly.

If you learn it, it is estimated that it will take at least three months to learn proficiently. It's easy to operate, at least two years or more! As long as you have a goal, then go for it!

Person. In this life, I have only learned one skill, and whether it is to go to the **, it is my own skill.

As long as you study hard, there is nothing you can't learn!

It is not difficult to say that it is difficult to learn a truck crane, and it is certainly not easy to learn to do well, the key is that you are not serious enough to learn, and whether there is a good teacher to teach you.

As long as you have patience and perseverance to learn, the crane is as easy to learn and can learn well.

Summary: It generally takes about a week to master the basic operations.

It generally takes a week to learn the basic operation of the crane, but it is important to pay attention to the gradual progress. If you want to learn the skills of cranes in depth, it will take a long time.

Crane Introduction:Crane is the common name of crane, crane is a kind of lifting machinery, is a kind of cyclic and intermittent movement of machinery. A duty cycle consists of:

The pick-up device lifts the item from the pick-up place, then moves horizontally to the designated place to lower the item, and then performs a reverse motion to return the pick-up device to its original position for the next cycle. Such as fixed slewing cranes, tower cranes, truck cranes, tires, crawler cranes, etc.

Under normal circumstances, it takes at least a month to work independently from zero foundation, because learning to drive a crane not only requires learning driving skills, but also has to learn maintenance, fault repair and other knowledge, so that you can be independent. I know that there is a developed school in Zhengzhou where you can learn to drive a crane.

It doesn't take long to learn how to drive a crane.

If you want to learn simple operations and be able to carry out daily work, it is generally enough to have about ten days.

If you want to operate better, you have to practice for a long time.

About a week, when I was studying, I did it alone in a week, but it had to be slow.

Due to the prosperity of domestic infrastructure, the market for special machinery operators is huge, such as Xiong'an New Area, where the treatment of such operators is also very good, and the market is very extensive. That's all for my answer, thanks for your support!

If you want to learn cranes, you can generally go to some people who have this kind of skills as apprentices. There are also many that go to specialized technical schools, that is, vocational schools, but have to pay for them.

Crane is a kind of lifting and handling machinery that is widely used in ports, workshops, electric power, construction sites and other places. The name crane is the unified title of lifting machinery. Usually called cranes, the main ones are truck cranes, crawler cranes and tire cranes.

The use of cranes is to hoist equipment, rescue, lifting, machinery, and rescue.

Structural cranes mainly include lifting mechanism, running mechanism, luffing mechanism, slewing mechanism and metal structure. The hoisting mechanism is the basic working mechanism of the crane, which is mostly composed of a hanging system and a winch, and there are also heavy objects that are lifted through the hydraulic system. The running mechanism is used to move heavy objects horizontally or adjust the working position of the crane, which is generally composed of an electric motor, a reducer, a brake and a wheel.

The luffing mechanism is only equipped on the boom type crane, and the amplitude decreases when the boom is raised, and the amplitude increases when it is lowered down, and it is divided into two kinds of balanced luffing and unbalanced luffing. The slewing mechanism is used to make the boom rotate, and is composed of a driving device and a slewing support device. The metal structure is the skeleton of the crane, and the main bearing parts such as bridge, boom and gantry can be box structure or truss structure, or web structure, and some can be used as supporting beams with section steel.

I used to learn truck cranes in the training school of Hebei Chongshuai Machinery, and the teaching was not bad.

If you want to learn forklift cranes near Shijiazhuang, I can arrange training exams.

The country is now engaged in construction everywhere, construction is inseparable from construction machinery, and now there is a shortage of crane drivers, so the prospect of learning cranes is still very good, and it is not difficult to learn cranes, it is a few operating rods, in fact, in addition to being able to open, basic maintenance and safety prevention and control knowledge and some experience and skills are also very important.

Some will be apprentices on the construction site, but it will take a long time, basically about half a year to a year, the core things will not be taught to you by the master You need to explore it slowly by yourself, and some will go to a specialized technical school to study but have to pay for it. However, I can get out of the teacher quickly, basically I finish learning in about a month, and I learn more comprehensively, and I also arrange work.

One is that you don't need to invest in the early stage, but the time drags on for a long time, the things you learn are not comprehensive, and there is no certificate that requires you to find a job by yourself, one is to make some money in the early stage, but you can learn quickly, make money quickly, and arrange work with an operating certificate Everything will be arranged with peace of mind.

I just finished studying and have no work experience, so I need to go out for a paid internship During the internship period, it ranges from 4000-7000 a month This time is mainly to study Don't think about a monthly salary of more than 10,000 yuan as soon as you go out That's not realistic You understand everything in about two or three months Experience is also normal It is normal to have a monthly salary of more than 10,000 There are pros and cons You can choose by yourself, if necessary, I can help you introduce and hope to adopt.

I am here for professional training crane excavator drivers, professional coaches for one-on-one teaching, on-the-go learning, learning until the end of the study, free issuance of certificates, direct recommendation of salary, students from other places with tickets to reimburse the travel expenses, come over only need to bring a change of clothes and toiletries.

Learning a crane has to go to work every day, which is quite tiring. And you have to be able to get off the bus, and the B ticket can be opened. The excavator is a quarterly job, sometimes it works for many days in a row, but sometimes it stays for many days! I learned cranes, and now it's tiring to be an apprentice, and it's not fake!

I think it's better to learn to drive a crane, the driver of the excavator is mainly young, and no one will use it when he is older, and he is in contact with some social people, the business is not easy to do, and it is not easy to do a job, not only is it not easy to find a job, but also to find a board car;

But learning a crane is different, you can drive it for life, you can basically learn it for two years, you can buy one yourself in a few years, and there will be a lot of work on the main road.

Driving an excavator and driving a crane are about the same salary. It is recommended that everyone pay attention to the safety of operation.

I drove an excavator for 4 years, and now I have driven a crane for 4 years, I feel that it is easier to drive a crane, and now the salary of the crane is not lower than the salary of the excavator, once the excavator is working, it will be busy, the crane is different, the hook and the bolt are operated by workers, and the driver is sitting there and waiting for the landing hook to turn, and he is not tired. Once the excavator excavates the earth or stone, it does not even have time to light a cigarette. In terms of learning, people without foundation, the crane only needs half a year, and the excavator needs at least one and a half years to master the skills of "ultra-flat, brush slope", etc., it is impossible to always dig and load the car, that is, to dig the soil, dig up a pile of soil, how to ensure that the bottom of the mound is a plane, which needs to be ultra-flat.

The crane is simple, as long as the car is supported, the things are lifted from here to that line, the crane height is commanded, now the crane is a limiter, the weight of the weight does not exceed a limiter value will be very safe, if the excavator is in the mountainous area dry stone, then you have to repair the circling road to climb the mountain, one side is the mountain and the other is the cliff, you need guts, technology, but also a little luck.

There are a few days fast, a month or two slow, and people's comprehension ability is different, so the time is naturally difficult to say. Basically, I learned the basic operation, and the rest relied on the actual operation by myself, and slowly comprehended and increased the technology.

It depends on the individual's proficiency in the vehicle and its use and the actual control of the venue when going out of the car, and the time for each person to go out is different. Those who work in the city are almost a month away, and those who work in the field have no concept of terrain for half a year.

This is a comprehensive type of work, the first to be familiar with the truck, the second to be familiar with the crane, but also to be familiar with the hoisting operation manual, the third to a variety of terrain how to carry the ground support well. If you can't pay special attention to these three hidden halls, it will be difficult to get out of the school. After all, hoisting operations are very risky.

Safety precautions for crane operation:

1. The crane driver must be certified to work.

2. The crane driver should go through certain training, understand the structure and performance of the crane and be familiar with the operation method of cover burning. Concentrate at work, and do not eat, smoke, read, read newspapers, and gossip during operation. It is forbidden to nap and sleep at work, and it is forbidden to operate after drinking.

3. The crane can only lift the load vertically, and the load that has not yet left the ground should be dragged rigorously, and the load should be avoided.

4. Distance catenary during crane operation.

and the horizontal projection distance of the through line must be greater than 2 meters.

5. Strict in underground pipelines or high-voltage lines.

Unauthorized operation before the path is discovered.

6. When the train passes, the crane must stop the operation, and the construction can only be continued after the train passes. When the crane is stopped, it must stop along the existing line.

When manually shifting gears, be careful to increase or decrease them one gear at a time.

Crane driving is a technical job, the longer the driving experience, the more wages you get, in fact, you want to give up at the same time, there are many people who want to start as an apprentice.

Of course, if there is a better place to go and a better opportunity, giving up means a new beginning, and it is not impossible to choose to give up. But if there's no better place to go, why not stick to it, and one day, when you become a crane driver, you will be grateful for your persistence.

Learn the tricks of the crane:

1. When manually shifting gears, pay attention to increasing or decreasing gears step by step.

2. If there is abnormal noise, odor, abnormal vibration, abnormal acceleration of the crane during driving, or the steering wheel.

If there is an abnormality in the brakes, you should immediately slow down and stop the vehicle in a safe position for inspection.

3. Pay attention to the instructions of each instrument panel of the crane, including double-needle air pressure gauge, oil pressure gauge, water temperature gauge, etc., and the indication data must meet the relevant requirements.

4. When climbing, downshift should be done in advance to reduce the load on the engine and drive system.

5. If the fuel is cut off during driving, the air may enter the fuel system, if the engine cannot be started after replenishing the fuel, the fuel system should be exhausted.

Promising. If you learn crane technology, you will have a wide range of employment and good employment prospects.

The main employment directions after learning crane technology are:

1. Can be engaged in related work in mechanical and electrical products manufacturing, railway, port industry, electronic information industry, government institutions and foreign-funded enterprises.

2. Can be engaged in the detection of truck cranes (cranes), fault analysis, judgment and elimination of truck cranes (cranes), and the disassembly and replacement of spare tape parts at the truck crane (crane) after-sales maintenance station.

3. Engaged in procurement, warehousing, sales, and management of truck crane (crane) accessories.

4. Engaged in the operation of various processes of the whole machine assembly and production line of automobile lifting (crane) production enterprises.

The crane driver needs to hold the crane operation qualification certificate, and the operation qualification certificate of the truck crane, crane crane, and gantry crane driver is not the same. If you also need to drive a car on the road, you will also need a truck driver's license.

Many employers require that driving a truck crane must have a B license or above, and the crane device needs to obtain a special operation certificate from the relevant department before it can work on the job, that is to say, one vehicle has two licenses. In general, learning to crane is still very good, but if you want to find a job, in addition to improving your technical level, you still have to hold a formal certificate. <>