What are the solutions to mobile phone screen shaking and causes?

If you are using a Huawei phone and find that the screen shakes suddenly occurs when using the phone, you can troubleshoot the following items:

1.If your phone's screen display suddenly shows a screen shake.

It may be due to the interference of human static electricity on the display signal when the environment is dry, the mobile phone system has an automatic error correction function, and the display will return to normal within a few seconds, if it does not return to normal, please try to restart the mobile phone and recover.

2.If your phone doesn't shake until you're using an app.

If the preceding methods do not solve your problem, we recommend that you back up your data in advance (third-party apps such as QQ and WeChat must be backed up separately) and bring the relevant purchase voucher to a nearby Huawei Customer Service Center for maintenance.

Huawei Customer Service Center.

Boarding service. Make an appointment for service.

1. The screen is damaged.

Solution: Whether the mobile phone screen has been dropped recently, it may cause the mobile phone screen to malfunction or the parts connected to the screen to be loose and faulty, and it should be repaired.

2. Electrostatic influence. Static electricity can occur during screen wiping or swiping quickly, which may affect the deflection of liquid crystal molecules within the screen, resulting in horizontal streaks, screen shaking, screen flickering, or color casts. When the screen is not attached to the original protective film, the moment you quickly swipe the screen or remove the screen protector, the protective film is prone to static electricity due to material relations or dry environment, and there may be horizontal stripes, screen shaking, screen flickering or color cast.

In the above cases, the phenomenon disappears when the static electricity dissipates.

Workaround: It is recommended to turn off the screen before wiping it with a clean, soft cloth or removing the screen protector.

Full anti-virus scanning.

4. Using an inferior charger to charge the mobile phone will cause battery damage, unstable battery power, and will seriously damage the touch screen.

Solution: Use the original charger of the mobile phone, if there is no or lost it is recommended to go to the official to buy.

Phone screen shake flickering solution:

1. Turn off the brightness automatic adjustment function, which can be automatically checked by pulling down the top curtain menu - removing the brightness.

2. Eliminate the phenomenon of splashing screens caused by conflicts between third-party applications. Back up your phone's data (**thin, SMS, multi**data, etc.), and try to restore your phone to factory settings (Settings - Account Tab - Reset - Factory Reset).

3. If the problem still exists, it is recommended to bring the purchase invoice and repair card and send the mobile phone to the nearest service center for testing.

If the white line is white, there is a problem with the LCD cable. However, if there is such a problem, it can only be replaced by liquid crystal treatment, and now there are original liquid crystals and ordinary ones on the market. The original one is estimated to be about 180, and the ordinary one is about 120.

It depends on the local ****.

For non-smart phones, the screen shake of the mobile phone is generally caused by damage to the motherboard and unstable voltage.

The smart phone may be caused by program disorder and incompatibility, and it is almost the same to update the system.

The main reasons for the shaking of the mobile phone screen are:

1. Hardware: If the screen is welded loosely, it has not been dropped, and some hardware may have been broken and needs to be repaired.

2. Software: It may be a system problem, it may be that the system is not brushed well or there is a problem with the carrying system. Solution: Restore factory settings or flash the machine.

3. Other factors: Water dripping on the screen of the touchscreen mobile phone will also shake back and forth.

The mobile phone screen flickered, usually for the following reasons, you can self-check:

1) See if it's a problem with the settings, you can reset it.

2) It may also be caused by software problems, if it is caused by a third-party software application, try uninstalling it; Or if it's a system issue, try upgrading to a new firmware or re-flashing your phone.

3) In addition, it is necessary to consider whether it is a problem with the screen itself, whether it has been dropped recently, or whether the screen is broken, in this case, it will be sent directly for repair.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

It depends on the specific reason, if the screen display is abnormal when charging, most of them are caused by the use of inferior chargers!

Summary. Generally, mobile phones are attached to the screen, and it is normal to press hard with water ripples, and you can paste a tempered film to relieve the strength of the hand press If it is an ordinary force press, if it is not so hard, there is also jitter It is a quality problem, and you have to find after-sales returns.

Why does my phone's screen keep shaking when I press and hold the screen? Urgent.

Generally, mobile phones are pasted with hidden answers, and it is normal to press the dust with water ripples, and you can paste a tempered film to relieve the strength of the hand press If it is a general stove and smart pass force press, if it is not so hard, there is also jitter is a quality problem, and you have to find after-sales returns.

Holding down the screen will shake itself because of what.

Will there still be a situation where you click on the app randomly and are not controlled?

1.Hardware: The screen ruler is loosely welded, whether it has been fallen, and some hardware may have been broken and needs to be repaired.

2.Software: It may be a system problem, it may be that the system is not brushed well or that there is a problem with the system.

Solve the problem of restoring factory settings or flashing the phone. 3.Other factors:

The touch screen is disturbed, and the water dripping on the mobile phone screen will also sway back and forth.