What are the construction tools of art paint, and how to construct art paint

Art lacquer in general.

The four processes of art paint construction:

1. Next, you can implement the first process of art paint, use a special art paint batch knife, a knife on the wall to scrape a similar (rectangular) square pattern, try not to overlap between each pattern, and the angle of each square as far as possible towards the different, staggered. It is best to leave a gap of half the size of the pattern between the patterns.

2. After the first process is completed, the second process of the most important art paint will be implemented, and the same art paint knife will be used to fill the gaps left by the first construction, of course, not simply to make up, but to stagger the corners of the pattern left by the first construction.

3. After the second process is completed, you have to check whether there are any gaps on it that have not been filled, whether there are boring places, and gently polish them with No. 500 sandpaper. A good art paint can be shiny, and then the third art paint will be used. According to the original method, a knife is scraped on it, and polished while scraping, which is relatively high-grade art paint.

4. Final polishing: After the completion of the three batches of scraping, the artistic lacquer pattern effect has been formed, and the angle is adjusted with a stainless steel knife to scrape and polish until the wall is as shiny as marble. [Understand the market prospect of art paints].

Shell powder wall film, wall film board, texture paint, art paint, art wall board, etc. The main products are the self-developed Taisher texture wall film and the matching Atai.

Texture wall film special coating, is committed to providing high-quality products and services to meet the needs of our customers.

Marble color is a high-end indoor water-based art paint, which can be made with simple tools, which can form a retro style, or can be done to imitate marble effect, which fully meets the main artistic modeling of the wall, with clear colors, high-end and elegant, ever-changing visual effects and a unique three-dimensional sense of hierarchy.

Art paint has the following advantages over ordinary paint:

1. Rich in layering, delicate and realistic patterns and textures, soft luster and comfortable feel;

2. Healthy and environmentally friendly, able to adsorb harmful substances such as formaldehyde;

3. High hardness, scratch resistance, durability comparable to stone;

4. Personalized customization, hand-made, highlighting taste;

5. Waterproof, moisture-proof and mildew-proof, stain-resistant and scrub-resistant;

6. Seamless connection, no peeling and cracking, no fading.

If you want to know more about art paint, it is recommended to consult Hongyan art paint. The emergence of Hongyan art paint has brought new ideas to designers, new design ideas, to meet the different styles of designers, improve the overall decorative effect of the room, art paint shows a distinctive decoration style, and at the same time through the perfect decorative effect of this product, art paint brand can bring relatives, friends, neighbors, colleagues and other more potential customers to meet different customer needs of different personalities.

When carrying out wall decoration construction, many owners will choose to use art paint to decorate the wall, art paint is not only natural and environmentally friendly, but also has a good texture and texture, so how to construct art paint? Let me tell you more about it.

How to apply art paint

1. Grassroots treatment.

Before the construction of art paint, the position of the wall that is damaged, peeling, hollowing, chalking and other phenomena should be thoroughly cleaned, and the impurities such as dust, oil belt leakage and dirt on the wall should be cleaned up.

2. Fill in the joints.

Secondly, a layer of concrete interface agent should be painted on the wall, and then a layer of exterior wall putty should be painted to fill the wall surface to achieve the effect of local leveling. If there is a large hole in the wall or if there is a defect in the wall, then flexible putty should be used to fill it. When the putty is completely dry, use a grinding tool to polish and smooth the local protruding position, and then spread flexible putty on the wall to keep the wall base layer flat.

3. Polishing the substrate.

When the putty is dry again, use a sanding tool to sand the wall again, so that the wall base can be kept flat. Then paint the flexible putty on the wall again, and when the putty is dry, use a sanding tool to polish the wall to make the wall more flat.

4. Texture portrayal.

1) First add water to the finishing mortar material according to the specified modulation ratio for modulation, and after the modulation, it needs to stand for about 5 minutes before it can be used. Then apply the prepared putty base paint mixture to the wall, and then use a putty knife to scrape the wall to fill all the potholes in the wall. When the bottom of the putty is dry, use sandpaper to smooth out the wall.

Next, you can paint the texture on the wall according to the customer's needs.

2) When depicting the texture, you should first use an art paint knife to scrape out the pattern on the wall, each pattern can not overlap together, and there should be gaps between each other. Then you should patch up the staggered corners of the pattern, and finally you need to check in detail whether there are gaps in the whole pattern, and if so, you need to fill them. If you find any frizz, you also need to use a batch knife to scrape the frizzy area, and polish it at the same time.

5. Texture coloring.

Use a sponge to pick up some of the dye and apply it lightly to the wall, then use the sponge to absorb it.

6. Surface treatment.

Use a roller brush to roll out the texture on the wall, then spray a layer of exterior latex paint on the wall.

The above is a detailed introduction to how to construct art paint, friends who need to carry out art paint decoration construction, you can refer to it, it is recommended that you must carry out art paint construction according to the correct construction steps, otherwise it is easy to cause the construction effect of art paint to be affected.

Summary. 1. Before the base surface is treated, the wall needs a certain amount of time to maintain. Before scraping putty, the bottom should be thoroughly cleaned.

1. Before the base surface is treated, the wall needs a certain amount of time to maintain. Before scraping putty, the bottom should be thoroughly cleaned.

2. Brush the sealing primer After the relief is dry, paint the sealing primer. Sealing primers generally do not need to be diluted with additional thinner.

3. After the three-dimensional texture paint is dried, the three-dimensional texture paint is painted. Generally, construction methods such as scraping (plastering) or spraying are used.

4. Spraying overshadow varnishSome three-dimensional coatings need to be sprayed with a layer of overlay varnish to form a protective layer and further improve the decorative effect of the three-dimensional coating. The varnish should be sprayed evenly, and there should be no leakage and sagging.

The construction method of art paint is as follows:

1. Preparation tools: special batch knives for art paint, polishing stainless steel knives, sandpaper from 350 to 500, waste newspapers and masking paper, etc.

2. Treatment of the substrate: make the putty bottom of the wall according to the standard of making high-grade interior wall paint. Be sure to choose a good interior wall putty, this is because art paint belongs to high-end art paint, is a self-sealing paint without primer, to ensure the compactness and firmness of the substrate, after plastering the putty, and then use 350 sandpaper to polish and smooth.

3. The first art paint: Next, we will implement the first process of art paint. Use a special art paint knife to scrape a pattern similar to a square on the wall, try not to overlap between each pattern, and the angle of each square should be as different and staggered as possible.

The position between the pattern and the pattern, preferably with a gap of half the size of the pattern.

4. The second art paint: after the first is done, we will implement the most important second art paint process, and the same is to use the art paint batch knife to fill the gaps left by the first construction, of course, this step is not a simple mending knife, but to stagger the corners of the pattern left by the first construction.

5. The third art paint: After the second process is completed, it is necessary to check whether there is a gap on it that is not filled, whether there is a frizzy place, at this time, we can use 500 sandpaper to gently polish, and a good art paint can play a gloss. The third art paint can be scraped on the wall according to the original method, and polished while scraping, which is relative to the high-grade art paint.

6. Polishing: final polishing. After the completion of the three batches of scraping, the artistic lacquer pattern effect has been formed, and the angle is adjusted with a stainless steel knife to scrape and polish until the wall is as shiny as marble.

The construction steps are divided into base treatment, coating interface agent, making texture, and painting art paint.

1. Grassroots treatment. Before painting art paint, you need to remove the loose peeling position on the wall and the dust and other impurities on the wall.

2. Apply the interface agent. Fill in the joints, apply a layer of concrete surfactant, and then repair the exterior wall with putty, and wait until it is dry and then polish it flat.

3. Make textures. The finishing mortar is modulated according to the specified proportion, and then let it stand for 5 minutes and use a putty knife to manually base it to create a sense of texture.

4. Paint with art paint. After the base layer is ready, make sure that there are no potholes on the surface, and finally wait for the base layer to dry completely before using a roller brush to dip the art paint for application.