What flowers are suitable for cinders, and what flowers are suitable for cinders?

Cinder mixed with soil can raise succulents.

After the cinder is mixed with the soil, the soil is loose, which can effectively prevent the soil from agglomerating and compaction.

The main components of cinder are silicon and aluminum oxides, and its structural characteristics are porous substances, with a certain specific surface and adsorption activity.

Advantages of cinder blending:

1. Breathable and permeable, the use effect is no worse than that of blue stone, light stone or phytophyllite;

2. Contains a lot of trace elements, such as iron oxide, calcium oxide, magnesium oxide, etc.;

3. Contains a large amount of burned stones, loess and other succulents required for planting;

4. Reduced to almost zero cost medium, especially for those who plant in large quantities, it plays a large number of filling advantages.

The remaining cinders after the coal is used can be used to grow flowers, which can make the soil more loose. But not all flowers can be cured with cinders. The details are as follows:

1. Cinders can be used to raise flowers.

Cinders can be used to grow flowers, and cinders can be mixed with soil to raise succulents. After cinder is mixed with soil, the soil can be made more loose, which is conducive to preventing soil agglomeration and compaction. Raising succulents with cinder can make the succulent root system survive better.

Many people like to use coal to raise flowers because coal contains silicon, aluminum oxides, etc., like bamboo charcoal, which has strong adsorption activity. Moreover, cinder can be said to be a zero-cost substrate, which is very cost-effective and advantageous for enthusiasts who grow succulents in large quantities.

2 How to raise flowers with cinders.

After the coal is used, the remaining cinder is a whole piece, so you can't directly use the whole cinder to plant flowers, and you must crush the whole cinder first. Then prepare a sieve to sieve the crushed cinders once, you can sift them several times, and the granular cinders are what you need to raise flowers.

Put the sieved cinders in a container and pour in an appropriate amount of water to soak, as long as the water is not over the cinders. Then find a sieve, sieve the cinders in the water, and select the finer cinders, which can be left for use. And the remaining cinders can be directly discarded.

As mentioned above, the cinder should be sieved when used, and the size should be determined according to the size of your plant, not necessarily how big or how small you have to be, and there is a small problem, the cinder from the boiler of industrial and mining enterprises is not as good as the honeycomb cinder burned at home, because the cinder from the large boiler is not as complete as the cinder at home, and the sulfur content is larger than that at home, which is certain, but I have not tried how much bigger it can cause bad consequences to the flower, it seems that there are cinders from large boilers, There doesn't seem to be a problem. It's just that it's not as good as honeycomb coal in comparison.

Suitable ... Cinder and humus... The water permeability and breathability are very good. @1$

My planting of flowers is basically vegetable garden soil honeycomb cinder plus some organic fertilizer, appropriate increase or decrease, has been very good for many years

I can't understand it a little emotionally, the cinders are too broken, and aren't they even more breathable when wet.

When planting orchids, can cinders be used to pad the bottom of the pot?

Cinder soil is suitable for raising flowers that like soil with good air permeability and water permeability, such as roses, gardenias, tiger orchids, Luohan bamboo, aloe vera, jade trees, rhododendrons, dripping Guanyin, ivy, etc. Cinder contains a large amount of trace elements. Raising flowers with cinder soil can improve the flower soil and make the flowers grow more lushly.

What plants are suitable for cinder soil.

Cinder soil is suitable for raising cacti, tiger orchids, spider orchids, etc. When used to raise plants, it can be laid directly on the soil surface of the pot, so that the nutrients in the cinder soil slowly penetrate into the roots of the plants, and the roots of the plants will be converted into the required nutrients after absorption, so as to promote the growth of plants quietly.

Precautions for cinder soil bending.

When raising flowers, it should be noted that although cinder soil contains a large number of trace elements, it can not be used as the maximum fertilizer for plants, and cinder soil can be used alone when planting plants. When cultivating flowers, it can be used as a medium with good drainage of the slag and mixed into the plant potting soil.

Can coal slag be planted with flowers.

Cinder can be used to grow flowers, because cinder has strong drainage and air permeability, and also contains a variety of trace elements, such as iron oxide, magnesium oxide, calcium oxide, etc. Usually, after the cinder is burned at high temperature, there is basically no germ residue, so it will not cause bacteria infection in the flowers.

Key points of coal slag planting flowers.

What flowers are suitable for coal slag.

Cinders are more suitable for long meat. Of course, cinders can also be used to grow some other flowers.

Coal slag planting method.

First, crush all the cinders. After crushing, separate them with a sieve to select smaller particles. The small particles can then be dried again to remove the debris and then ready to use. Such slag is more suitable for growing flowers.

Precautions for planting flowers in coal slag.

It should be noted that cinders are weakly alkaline after calcination at high temperatures. Although cinders do not contain pests and diseases, they basically do not contain nutrients, and they are so angry that it is impossible to plant flowers directly. Before planting flowers, be sure to soak them to remove the fire, break them and sieve them before using them.

1. Pomegranate flowers, briquette slag is suitable for planting pomegranate flowers, and the plants prefer weak alkaline soil. 2. Ulmus elm leaf plum, briquette slag can provide alkaline substances for elm leaf plum. 3. Oleander, mix briquette slag with garden soil and humus soil to plant oleander.

4. Forsythia, suitable for growing in loose and fertile slightly alkaline soil. 5. Pear blossom prefers alkaline soil environment.

1. Flower species

Briquettes are weakly alkaline, suitable for planting flowering plants that like alkaline soil, such as pomegranate flowers, elm leaf plum, oleander, forsythia, pear trees, jujube trees, weeping willows, etc., and cannot be used to grow gardenias, jasmine, camellia and other acid-loving flowers.

2. Planting method

The briquette slag is first soaked in clean water to remove the fire gas, and then it is crushed and sieved, and the small particles sieved out can be fully stirred with garden soil and fine sand before planting plants, and the large particles can be used to pave the bottom of the pot to enhance its ventilation and drainage.

3. Effective value

Briquette slag is rich in iron oxide, sulfur, magnesium oxide, phosphorus, potassium and other trace elements, which need to be mixed and matched with other media to play its advantages, pay attention to the proportion of addition can not exceed 30%, and it has no pests and diseases after high temperature calcination.

4. Precautions

Although briquette slag is rich in nutrients, but its corrosiveness is strong, can not be directly used to plant flowers and plants, before use to select fully burned briquettes, the color is best red, and then put it into water to soak for 3-5 days, take out and dry before use.

Briquettes cannot be used directly to grow flowers.

Although briquettes are weathered by the earth's crust and are rich in mineral trace elements, briquettes that have not been burned contain high sulfides and cannot be used directly to raise flowers. Briquettes can only be used to cultivate succulents, saxifolia, aloe vera, vegetables, etc., which are not strict with soil requirements, and can also be used as cuttings and seedling substrates, and can not increase fertilizer efficiency.

Briquette slag flower cultivation has certain limitations, so it has many excellent alternatives. For example: ceramsite, volcanic rock, perlite, vermiculite, etc., they are not expensive, and the amount of hail is not much, so you can also choose to use it.

ways and means of using cinders

When planting flowers with briquette ash, the unburned black coal should be removed first, and the larger particles should be sieved out, and a layer of coarse-grained cinder should be laid under the bottom of the flower pot. Then, the coarse cinder is covered with a layer of well-rotted cake fertilizer, poultry manure, bone meal, etc.

Finally, cover it with a thick layer of crushed coal ash so that it can be planted. In addition, in order to prevent rain erosion and sun protection and water retention, the top layer can also be covered with a layer of coarser coal ash slag.

Cinder soil is acidic soil, and plants that like acidity, have good drainage, and have a large amount of burning gravel soil are suitable for planting in cinder soil. Cinder soil is suitable for growing: corn, sunflowers, succulent plants, camel thorns, etc.

cinder soil is suitable for growing plants.

Corn. Corn does not have strict requirements for the soil. It prefers slightly acidic soils.

When the soil is mixed with corn, it should be noted that it has poor alkali tolerance, especially chloride ions are very harmful to corn. It is best to add black soil, chernozem, carbonate black soil, etc. It is more conducive to the development of its growth cave hall and improves its yield.

Sunflower. Sunflower is adaptable, drought resistant and barren, can be planted in saline-alkali land, and is suitable for planting in loam or sandy loam soil. When mixing soil, it should be noted that cinder soil should be added in proportion, and it is best to add an appropriate amount of ordinary garden soil.

Succulents. Most succulents prefer acidic, well-drained, and loose soils, which are suitable for the cultivation of edible red jade soil, peaty soil, garden soil, etc. When adding soil to succulents, be sure to add some sand to ensure the stability of the root system, and add some garden soil to increase the nutrients in the soil.

Camel thorns. I like acidic, well-drained soils that are suitable for growing in sandy soils. When mixing soil with camel thorns, the soil should have good drainage properties. The original growing area of camel thorns does not require a lot of water, and poor drainage can easily lead to water accumulation and root rot.

Burned cinders can be used to grow flowers, but not directly, and the roots of flowers can be harmed by the burnt cinders, so they need to be fully treated before they can be used to grow flowers. There are many benefits to planting flowers with treated cinders, which can increase the thermal insulation effect and moisturizing effect of the flower soil, and can also increase the air permeability and water permeability effect of the soil, and prevent the lack of rotten roots of the flower type.

Can you plant flowers after burning cinders.

Burned cinders can be used to grow flowers, but not directly, and the roots of flowers can be harmed by the burnt cinders, so they need to be fully treated before they can be used to grow flowers.

There are many benefits to planting flowers with treated cinders, which can increase the thermal insulation effect and moisturizing effect of the flower soil, and can also increase the air and water permeability of the soil, prevent the flower from rotting roots, and make the growth of the flower better.

The key points of planting flowers after burning cinders are suitable for planting what flowers are suitable for planting after burning.

The burned cinders can be used to grow flowers such as spider plants, tiger pill orchids, and yueji.

Burnt cinder flower planting method.

If you want to plant flowers after burning cinders, you need to soak it for about seven days, during which you need to change the water more than three times, so that you can remove the impurities in it, and you can also clean it, and the cinders after soaking will become weakly acidic, and then mix it with the soil in a certain proportion to plant flowers, or cover it with the soil of flowers, both of which can be.

Precautions for planting flowers after burning cinders.

When planting flowers with burned cinders, we must pay attention not to use it directly to plant flowers, and it is not soaked well or directly planted with Hui flowers.