After the soft pottery products are done, can they be burned directly with fire?

After the soft pottery products are done, it is best not to burn them directly with fire.

Soft pottery is fixed at a high temperature of about 130 degrees, and the temperature is not easy to control (the temperature is too high to crack the soft pottery), but also the soft pottery will be discolored and blackened.

After the modeling of soft pottery works is completed, they must be baked in the oven, and this process has a direct impact on soft pottery works.

1. Boiling and shaping method: (suitable for beginners without oven).

Put the soft pottery works into cold water (it is best to use pure water, because tap water contains calcium carbonate, which will make the surface of the work "scaling" and affect the appearance), heat it until it boils, and keep it in this state for 10-20 minutes (depending on the size of the work), after turning off the fire, take out the water or wait for the water temperature to cool naturally, and then take out the work (note: the whole process of setting must use a simmer, be sure to let the clay have a slow heating or cooling process, the fire will cause the item to crack due to the large temperature difference between the inside and outside). If the hardness of a setting is not ideal, it can be repeated again or several times until the satisfactory effect is achieved

It is one of the most suitable shaping methods for soft pottery, which saves time and effort! ）

Put the soft pottery works to be set into the oven, set the baking temperature to 110-150 degrees Celsius, bake for 5-10 minutes (depending on the size of the work) (the temperature should not exceed 170 degrees), after baking, do not open the oven door immediately, and wait for the oven temperature to drop to room temperature before taking out the works (you can slowly open a small gap to dissipate heat over time). (Note: If the furnace door is opened immediately after baking, cold air will quickly enter the furnace, which will cause the work to crack due to the large temperature difference between the inside and outside, so be sure to follow the principle of "slowly heating up or cooling".)

In addition, there are two elements of baking soft pottery: time and temperature. Both elements must be controlled in an ideal condition in order to bake the perfect soft-clay work.

Hello! It is best to use the oven, the specific time depends on the thickness of the product, generally one centimeter thick product is 6 to 7 minutes.

You can use an induction cooker, but you really can't use a microwave oven.

In fact, the soft pottery needs a high temperature of about 130 degrees, and the temperature is not easy to control directly with fire (the temperature is too high to make the soft pottery crack), but also the soft pottery will be discolored and blackened.

Hope it helps, hopefully.

Soft pottery roasting method:

1.Put the finished soft pottery in the oven. Fixed.

2.Turn the upper and lower pipes of the oven to 100 degrees. No need to preheat to start baking. Bake for 20 minutes.

3.Allow the oven to cool naturally and never open the lid. If the hot and cold air is uneven, it is easy to crack the soft pottery. Cool for about 1 hour. Touch the surface of the oven and there is no heat.

Soft pottery, also known as plastic pottery, originated in Europe, in the 80s, Taiwan Province introduced the translation of soft pottery, and in the 90s, the mainland introduced the translation of plastic pottery, it is not clay, it is a PVC artificial low-temperature polymerization material, which seems to be plasticine, close to plastic, and is one of the professional sculpture materials.

The rise of soft pottery originated after World War II, and since then, Europeans have been playing with this low-temperature polymerized clay, which appeared in China around the 1980s, and was first popular in Taiwan.

The title "soft pottery" is inherited from the name of Taiwan. In the 30s of the 20th century, when German sculptors created this material, because it is highly malleable and plastic, the pattern is as colorful and brilliant as thousands of flowers, and the changeable characteristics of soft pottery have become teaching materials that inspire creative thinking and cultivate cultural temperament, which can fully satisfy the creative desire of human beings, and soon swept the entire European region and later spread to the United States and Japan. To this day, soft pottery is still a DIY favorite in the craft world.

Different colors of soil can be polymerized and shaped into a variety of kaleidoscopic patterns and shapes, and soft pottery will be the most fascinating craft material in the 21st century.

After the soft pottery works are completed, they must be finalized, and this process has a direct impact on the soft pottery works.

There are several training methods:

1. Boiling and shaping method: (suitable for beginners without oven).

Put the soft pottery works in cold water (it is best to use pure water, because tap water contains calcium carbonate, which will make the surface of the work "scaling" and affect the appearance), heat it until it boils, and keep it in this state for 10-20 minutes (depending on the size of the work), turn off the fire, take out the water or wait for the water temperature to cool naturally, and then remove the work.

Note: The whole process of setting must use a simmer, and the clay must have a slow heating or cooling process, as the fire will cause the item to crack due to the large temperature difference between the inside and outside. If the hardness of the first setting is not ideal, it can be repeated again or several times until the satisfactory effect is achieved, but it should be noted that it should be put into cold water for a second time after it has been completely cooled.

2. Baking and shaping method: (one of the most suitable shaping methods for soft pottery).

Put the soft pottery works to be set into the oven, set the baking temperature to 110-150 degrees Celsius, bake for 5-10 minutes (depending on the size of the work), do not open the door immediately after baking, and then take out the work when the oven temperature naturally drops to room temperature (you can slowly open a small gap to dissipate heat over time).

Note: If you open the furnace door immediately after baking, cold air will quickly enter the furnace, which will cause the work to crack due to the large temperature difference between the inside and outside, so be sure to follow the principle of "slowly heating up or cooling".

1. Put the silicone mat in the oven first, prepare the tiles or porcelain plate and put it on the silicone pad, and use tin foil to build a shed on it to cover the porcelain plate or tile below. Adjust the oven temperature, select the upper and lower tubes for heating, and the baking time needs to be determined according to the size of the work. Generally, hand-sized works are baked for 30 minutes, and large works need to be baked for more time.

2. Be careful not to use the metal baking tray that comes with the oven, the soft pottery cannot be used directly, and the side that touches the metal plate may be browned. Oven thermometer to see the inner ring Celsius. The small oven should be tested by yourself, with a small oven first of all, the work can not be too large, 12L can bake about 5cm of the work, the time is generally about 20 minutes.

Baking soft pottery method: put the soft pottery works to be shaped into the oven, set the baking temperature to 110 to 150 degrees Celsius, bake for 5 to 10 minutes, the baking time depends on the size of the work, the temperature should not exceed 170 degrees, after baking, do not open the furnace door immediately, and wait for the furnace temperature to drop to room temperature and then take out the work to leak.

Precautions: If the furnace door is opened immediately after baking, the cold air will quickly enter the furnace, which will cause the work to crack due to the large temperature difference between the inside and outside, so be sure to follow the principle of "slowly heating up or cooling".

The two elements of baking soft pottery: the time factor and the temperature factor, both of which must be controlled in an ideal state in order to bake and feast on perfect soft pottery works.

1. Oven: This is the best tool for soft pottery, you can put a layer of tin foil on the upper heat pipe of the oven, and the tin foil can be put on the top of the baking net, and then placed on the top layer of the oven. Place a baking tray at the bottom of the oven, and put a plate in the baking tray and the doll to be baked on top of the plate.

This will prevent over-roasting and foaming.

Second, the hair dryer, with the hair dryer hot air evenly blowing for 15-20 minutes, this should be according to the actual situation, the power of the hair dryer to determine the length of baking time and the distance between the hair dryer and the doll

3. Microwave oven, it is not possible to bake directly in the microwave, you need to use a large basin, put water in it, put a bowl in the basin, put the doll to be baked in the bowl, cover the lid and cover the basin.

Fourth, the rice cooker is basically the same as the microwave oven baking method.

It will be deformed, and it will be sticky and dusty.

Soft pottery is an oily substance, which does not dry naturally, and needs to be baked at a high temperature of about 100-150 degrees to set the shape. If you don't bake it, it will basically stay in its original shape, it won't deform, and it won't crack, but it's always soft.