What are the causes of mold in furniture? How can I prevent moisture and mildew in my furniture at h

<>For users living in the Gangnam area, the rainy weather is definitely a nightmare for all kinds of furniture. A few days ago, I saw that the furniture was quite good, but after a few days, I found that it was not the smell at all. When I opened it again, it was gone.

What else can you do? Don't worry, how to deal with the cabinet and the wood furniture method, please see here.

Causes and responses to cabinet problems.

The environment is humid. Generally, there are more residents on the first floor or users with poor ventilation and lighting conditions in the houses near the sea and lake, due to the humid air, pillows and quilts and other home textiles and fabrics are wet all year round, so it is very likely to make the cabinet dry. In addition, the dampness of the house is also likely to be due to the renovation and renovation of the waterproof, in this case, the house should be repaired, with sandpaper to remove the stain, and re-brush the floor paint and other waterproof coatings, until the paint is dry.

Cabinets are of poor quality. We all know that good cabinets are made of solid wood, and some are made of MDF and other boards, and many manufacturers use shoddy and inferior boards when making wardrobes, which is also an important reason for the development of cabinets. Generally speaking, MDF and wood veneer cabinets are more likely to develop, while logs are more moisture-resistant and less prone to development.

Therefore, when choosing the material of the cabinet, we must first clarify the knowledge of the type of home decoration board, and when the cabinet at home is developed because of the board, it can only be improved by painting. The varnish can be moisture-proof, anti-foul, if you are not afraid of trouble, you can also paste moisture-proof materials in the cabinet.

Bad usage habits. Bad habits can also make the cabinet troublesome, such as putting clothes into wooden furniture such as cabinets before they are completely dry, and not paying attention when cleaning the cabinets, so that moisture will seep in. When this happens, we need to take out the clothes in the cabinet and wash them again, and expose them to the sun until they are dry.

At the same time, use a dry brush to clean up the dirt in the cabinet, especially the metal components such as the hinges of the cabinet doors, and open the cabinet for ventilation for a few days after it is completely cleaned, and finally put the clothes in.

Wooden furniture is protected from the sun.

Opening windows for ventilation is the most fundamental. Good air flow is a great way to resist change, and regular ventilation can do this, especially in long, narrow indoor spaces.

Don't place it too close to the wall. Reasonable furniture placement can allow us to better prevent it, we can install wooden furniture against the wall part of the distance of about 1 cm, so as to avoid the invasion of moisture in the wet season. In addition, it is also very important to do a good job of home maintenance, and regular waxing of wood furniture can limit the occurrence of wood furniture problems.

Furniture mold is mainly due to dampness, sofas, carpets, quilts, pillows and even plush toys may be disturbed by moisture, for fabric sofas and carpets, be sure to remove dust from their surfaces regularly, if necessary, blow gently with a hair dryer. As soon as the weather is clear, it is necessary to seize the opportunity to put the damp home decoration in the sun to dry, put some desiccant in the furniture drawers, boxes and other places, and make some quicklime without a special desiccant, keep the room ventilated, if the room is wet all year round, the outer layer of the furniture is coated with waterproof paint to prevent water vapor from invading the wood, do not drag the furniture out and put it in the sun.

The furniture board is not dry enough, the outside air humidity is too high, the quality of the board is relatively poor, the weather is more humid, especially the kitchen is more likely to be more humid; It can be wiped with a special furniture cleaner, it can be placed in a ventilated place for natural drying, and a layer of furniture wax can be applied to the moldy area.

The first is damp, the second material is not good, the third is often corroded by water, the fourth is not well cared for, and the fifth wood absorbs water, so the home should be kept dry and the fixture should be cleaned frequently.

In life, we may encounter the situation of moldy furniture, do not panic, to deal with it in a timely manner, otherwise it will not only damage the furniture but also pollute the environment and even affect the health of the individual, first of all, we must understand the causes of mold, solve the problem from the root, and secondly, use some methods to prevent the occurrence of furniture mold in advance, so what are the common causes of furniture mold, how to prevent furniture mold.

1. What are the common causes of moldy furniture?

1. Construction reasons.

The material used in the production of furniture is not naturally dried wood, but only the wood with the skin dried in the drying process or the substrate or container containing water in the process of construction; The air compressor or air during construction contains moisture; low-temperature thick coating; Hand sweat sticks to the workpiece, and the water mill is not dry; The water-based putty is not dry; After grinding, it is placed for too long, and the surface of the coated object absorbs moisture. All of the above can cause the wood of the furniture itself to be damp or contain moisture, which can lead to the growth and spread of microorganisms such as bacteria in the moisture.

2. Product reasons.

Furniture is generally wooden, because wood fiber contains protein, starch, oil, cellulose and other elements, mold is easy to survive in places rich in various elements, so wood is very suitable for mold production and reproduction.

3. Environmental reasons.

The weather in the south is hot and humid, especially during the rainy season, when the climate warms up and the indoor humidity is greater. The wood furniture itself has a relatively high humidity and is less moldy in the case of dryness, but in an environment with a humidity greater than 20%, it is easy for mold to multiply and survive. As a result, it is attached to the surface of the furniture, and obvious white mold can be seen on the furniture.

2. How to prevent mold on furniture.

1. Mold likes a warm and humid environment, and the temperature rises in spring and the humidity increases, providing a favorable environment for mold breeding. Closing doors and windows on rainy days and "returning to the south" to isolate the warm and humid air from the outside can reduce the phenomenon of "water" on the ground and walls to a certain extent, and keeping the home dry can reduce mold breeding.

2. If the floor and furniture at home have mold, you can wipe them with alcohol or disinfectant, which can effectively remove the mold plaque that has formed. However, it is necessary to wear plastic gloves when cleaning, and try to avoid touching and closing infants during the cleaning process to avoid injury.

The above is what are the common causes of furniture mold, how to prevent furniture mold all the content, I hope to help you understand the relevant knowledge of furniture mold, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention.

1. For the mildew spots of wrought iron furniture, it is necessary to repair them in time, remove the spots and then spray paint to isolate the air and prevent rust again.

2. For the mold of fabric furniture, you can first expose the fabric furniture to the sun, and then brush the mold with a brush, then wash it with stew, and clean it with calcium chloride solution.

3. If the wooden furniture is moldy due to the humid environment, you can first use a clean soft cloth to occupy a little furniture cleaning agent to remove it, and then apply a layer of furniture wax or furniture essential oil on the moldy part. If you feel that there is still a musty smell, you can put soap on the musty area or hang a yarn bag filled with sun-dried tea residue to effectively remove the musty smell.

1. When we look at the mold in a wardrobe, we should first pay attention to cleaning up the moldy place, generally wipe it clean with a dry paper towel, or brush it with a dry brush to clean up the moldy place. If you can't clean it up, you can wipe it vigorously with a damp cloth, which can often be very convenient to remove mildew.

2. If mold is found, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so as to effectively prevent mold from growing again. Mould is mostly caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.

3. The air is humid and easy to mold, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If the humidity in the wardrobe is too heavy, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

4. After mold, mold enters our Liang Mu home, which will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the wardrobe, which can absorb the excess water and talk in the wardrobe, so that the wardrobe oak shed is more dry. At the same time, we can put some orange peel in the wardrobe, which can also play a refreshing and environmentally friendly effect, and at the same time, we should pay attention to the frequent opening of the window for ventilation, and try not to use a humidifier indoors to prevent excessive moisture and affect the use of the wardrobe. After we usually mop the floor with a wet mop, we should also pay attention to opening the window to allow the moisture to be effectively dried.

1. The furniture will be moldy mainly because of moisture, especially wooden furniture and plush homes, when the weather is good, you can open the window to ventilate, let the air circulate, and keep it dry.

2. You can also put some bamboo charcoal, lime powder and other moisture-absorbing items at the bottom of the furniture, many foods will have desiccant, these desiccant can be collected, and then placed in the wardrobe, so that it can also be moisture-proof.

3. For leather sofas and wooden sofas, you can use waxing and painting to prevent mold on furniture; In humid weather, you can also turn on the air conditioner or floor heating to absorb the moisture in the room and avoid moldy furniture.