How to change the air conditioning filter element of the car

1. The car usually installs the air conditioning filter element at the rear of the co-pilot glove box, and the first thing to replace the air conditioning filter element is to open the glove box cover.

2. First, find the fixing buckle on the right side of the glove box and pull it out hard.

3. Remove the fixed buckle of the glove box cover and make it detached.

4. Squeeze both sides of the glove box to the middle with both hands, and the glove box can be taken down.

5. Take down the glove box to see the cover plate of the air conditioner filter, press the fixed buckles on both sides of the cover plate hard, and the cover plate can be removed.

6. Pull out the old air conditioner filter to the outside.

7. Install the new air conditioner filter element and restore it to its original position in reverse according to the disassembly and assembly order (pay attention to the installation direction of the air conditioner filter).

First of all, open the engine cover, remove the clip of the flow tank, and then remove the flow tank, you can see the air conditioning filter, after seeing the filter element, take it off directly, and replace it with a new filter element.

For car owners, the original air conditioning filter generally needs to be cleaned after one year of use, and regular cleaning of the air conditioning filter can extend its service life.

The air conditioning filter in most cars is a storage box under the windshield in front of the passenger seat, and you only need to pinch both sides of the storage box and squeeze it in to remove the air conditioning filter. Pull out the filter, replace it with a new air conditioner filter, and put the storage compartment back in.

The effect of the car air conditioning filter is to digest and absorb all kinds of dust and harmful substances in the outside air, so as to bring a faster driving natural environment to the employees in the car. If it is replaced frequently, it is very easy to block and grow germs, and then use the pipeline into the car, which is harmful to the body. Speaking of replacement, do you know where the car cabin air filter is?

How to change the car air conditioning filter?

Where is the car cabin filter?

Different car air conditioning filter parts are different, some car air conditioning filter under the windshield, is covered by the drainage stainless steel sink, when replacing this kind of filter, you need to tear the hood open, remove the buckle that fixes the water flow channel, remove the dirty stainless steel sink, you can see the air conditioning filter; The air conditioning filter element of most car series is located in the glove box in front of the front seat, and the glove box must be disassembled and assembled when replaced, and you can see the air conditioning filter inside, which is generally on the lower left side.

How to change the air conditioning filter element of the car (the air conditioning filter element in the glove box).

1. Open the glove box to the highest part, you can see the fixed lock, take it out, and squeeze both sides of the glove box to the middle with both hands, and the glove box can be disassembled and assembled;

2. Open the rear cover of the air conditioner air cleaner and pull out the activated carbon fiber of the air conditioner air filter;

3. Replace the activated carbon fiber of the new air conditioning air filter, if the air conditioning filter is not very dirty, it can be completely removed and re-applied, except for the activated carbon.

4. Install the components in the relative order of decomposition, then install the rear cover, install the glove box, and replace it with the lock.

Open the glove box first, then carefully pry the plastic lid on its right-hand side open. Because the plastic lid is fixed by the card slot, it can be broken without much effort, just like when you open the back cover of most smartphones, without using too much force.

Step two. Use a Phillips screwdriver to screw out the two screws on both sides of the glove box (remind you to put the screws that are dug out in the screw, don't lose them), you can remove the entire glove box, but it should be noted that there is a wire behind the small lamp in the glove box, remember to be gentle when unloading the glove box, don't tear the wire off.

Step 3. After removing the glove box, we can see the box where the air conditioner filter is installed, and we only need to open the buckles on both sides of the lid to open the lid and take out the old air conditioner filter.

Step 4. Under normal circumstances, the air conditioning filter is replaced once every six months for 10,000 kilometers, but according to the domestic air quality situation, if it is in a haze-stricken area, it must be replaced once every 3 months.

Let's take a look at how big the difference is between the old and new cabin air filters.

Step five. Before inserting a new filter, pay attention to the direction in which the filter is installed (indicated on the filter).

When the air conditioner filter is replaced, the first four steps of reverse operation are complete.

How to replace the air conditioner filter element of the car:

The air conditioning filter of most cars is behind the co-pilot glove box, and we need to remove the glove box before changing it. After the glove box is removed, you can see the box with the air conditioning filter, gently pull it out, this box is buckled, don't break it by deadlifting, you can see the air conditioning filter when you pull it out.

Remember to wipe the box clean before removing the old replacement filter, and then you can put the new air conditioner filter on.

Precautions for replacing the air conditioner filter element in the car:

1. Please buy the air conditioning filter produced by the regular manufacturer, and compare the appearance and size when buying the filter element, so as to avoid not being able to install it after buying;

2. When replacing the air conditioning filter, the car engine must be turned off;

3. When tightening the screws and removing the clamps, be sure to control the appropriate strength and do not break things;

4. When installing, pay attention to the installation direction of the filter element, and do not install the filter element in reverse;

5. After installation, check whether the filter element is installed correctly, and the filter surface needs to cover the entire air duct, and the surrounding area should be tightly sealed. Otherwise, the filtration effect will be very poor.

The replacement of the air conditioning filter element of the car is as follows:

1. First find the location of the air conditioning filter element of the model that needs to replace the air conditioning filter, the position of the air conditioning filter element is different for different models, mainly distributed in the lower left front of the hood, behind the driver's glove box and under the front cover vent.

2. Secondly, take out the old car air conditioning filter, at this time, you need to pay attention to the installation position of the original filter element and the position of the screw buckle, and at the same time you need to confirm the model of the original filter element.

3. Finally, replace the new car air conditioning filter, fix the screw buckles, and then start the air conditioning test effect.

The life cycle of the automotive cabin air conditioner filter

Generally speaking, how often to change the car air conditioning filter depends on the personal car, the external environment and the seasonal climate, under normal circumstances, urban family cars are replaced every 1-20,000 kilometers or about 1 year. If the usual driving environment is poor and there is a lot of dust, the air conditioner filter will be easily dirty, and the replacement cycle should be appropriately shortened. In addition, the frequency of use of air conditioners varies from season to season, and the replacement cycle is also different.

There are ordinary car air conditioning filters, and there are also activated carbon containing activated carbon, and there are tiny granular activated carbon sandwiched between the activated carbon air conditioning filters, which can use the physical properties of the granular activated carbon itself in a very short period of time when the air is blocked to absorb other small substances and more harmful substances in the air, and the filtration effect is much better than that of ordinary filters, but it will be more filial piety and expensive, and the service life is a little shorter than that of ordinary ones.

The steps to replace the trapped core of the automobile air conditioning filter are as follows:Operating environment: BMW X3, pliers, new filter element, etc.

1. Most of the installation positions of the car air conditioning filter are behind the glove box in the passenger cab, so first of all, open the cover plate of the glove box in the passenger seat, clamp the buckle with pliers, and remove the hook by gently pushing it out with your hand.

2. Unscrew the buckles on the left and right sides of the glove box counterclockwise, put down the glove box, and then the air conditioner filter cover can be seen.

3. Pick open the cover plate of the air conditioner filter and pull out the air conditioner lattice.

4. Take out the old air conditioner filter and replace it with a new one.

5. Push the air conditioner lattice back into the slot, buckle the cover, and buckle the glove box hook into the slot.

6. Tighten the buckles on the left and right sides of the glove box clockwise, and buckle the glove box to complete the noise.

The current heat is a bit unbearable. Watermelon, air conditioner and wifi buddy ready? In the summer, friends need to start driving air conditioning.

Do you know how to change the filter element in the air conditioner? They will soon need it in the heat of summer. Have you ever wondered how to use a car?

Let's give a brief introduction to Bianxiao cars for our friends.

How to empty the car filter:**.

The size of your car air filter** depends on the make, model, and year of your car, as well as the material of the filter. In the beginning, the most common automotive air filters on the market were three types of filters (the automotive air filter was the only filter that filtered the air outside the car and then sent it to the inside of the car). The first is a pure non-woven fabric (white two-layer cloth), which can remove large particles such as pollen, leaves, petals, pebbles and dust, and fine harmful gases can still enter the car.

The second type is slightly better, the toner sticks between the two layers of non-woven fabric, and has one more function than the previous one, which is to remove and adsorb formaldehyde with activated carbon. However, formaldehyde with too high density cannot be completely removed. The third HEPA+ honeycomb carbon filter, to put it bluntly, is designed with a honeycomb appearance, and the activated carbon can be plugged a little more, and the filtration effect is a little higher than that of the second one.

How much does it cost to change a car air filter: function.

The so-called air adjustable filter, I think the scientific name is &ldquo car air filter adjustment &rdquo, which is a filter specially used for air purification in the cabin. Most filament non-woven fabrics are used as the key filter layer, and some of the filter layers are added with high-efficiency adsorption materials such as activated carbon to play a better filtration role. The key function of the air filter is to filter the air entering the cabin from the outside, improving the cleanliness of the air inside the cabin.

Impurities in the air body of critical filters, such as tiny particles, pollen, bacteria, industrial exhaust gases, and dust. The function of the air conditioning filter is to prevent these pollutants from entering the air conditioning system, which can endanger the health of the occupants of the vehicle.

How much does it cost to change a car air filter: the replacement process.

At this stage of the work, which is basically done, the final outcome is just as critical. If the storage box is not installed properly, it can also lead to problems later on, such as the noise of the car while it is moving. Installing a storage compartment is the same as removing a storage compartment.

It's not brute force. Make sure the storage compartment is in place before you can tighten the screws one by one. Note that the screws only need to withstand a moderate amount of force, do not try to tighten the screws.

I think that most of the screws and nuts in cars basically have a specified torque when they are tightened. Strictly speaking, special torque wrenches are required. The most extreme example is that when the nut is applied to the tire, when it is already tightened very tightly, there is no need to worry about the whole person basically standing on the wrench and stepping down, which can easily cause damage to the bolt or nut, at least shorten the service life, and in the worst case can only be replaced.

The above content is how much does it cost to replace the air filter element of the car, as well as the replacement and functional problems of the air filter element. I hope that the brief introduction of the car can solve the problem for friends. I think there are a lot of things that we can replace ourselves, and basically small things that we can do, so we don't have to spend extra money to fix them.

Millions of car purchase subsidies.