How to deal with water seepage on the balcony wall?

In the face of water seepage on the balcony wall, we must do a good job in the waterproofing and water seepage treatment of the balcony, pay attention to the thickness of the waterproof layer to be about 5 mm during construction, and brush the waterproof coating more than twice.

And we need to pay attention to the balcony of the ground and the wall joint of 30 cm of the place also needs to be painted, we are in the construction of the balcony, to make a waterproof slope and water outlet, at the same time we have to the uneven place on the platform with cement slurry to make up, so that you can remedy the leakage, my family did this before, very practical.

If the balcony wall is leaking water, you can use some waterproof paint, which is very easy to use and will make you feel very easy.

When our balcony leaked, I used some waterproof paint, and gradually it did not leak, which made me feel very comfortable, and in this way I would make our balcony very clean and tidy, and also make me feel very durable, so that after a long time, it will also make me feel that our balcony has become very good.

Every family will encounter some small problems after decoration, balcony wall leakage, this problem often appears, sometimes because of the uneven formation of heat and cold in the air, and also because of the poor waterproof material in the wall.

My home in the decoration two months after the balcony wall seepage, when the water seepage is not too serious did not care too much, and later found that the wall seepage is too serious, had to cut off the tiles on the wall, in the decoration workers recommended to buy some water-based waterproof paint, painted on the wall twice, and some small gaps first with plugging king caulk filler, in the use of flexible waterproof paint paint.

I think balcony water seepage is easy to deal with, balcony leakage will have a great impact on daily life, balcony leakage is caused by many reasons, such as some cities without insulation, or water leakage caused by water pipes in the wall.

Balcony leakage, a lot of water pipes caused, now many users will put the washing machine on the balcony, but also will plant a lot of flowers and plants, when installing faucets on the balcony, if you do not do a good job of waterproofing, resulting in the destruction of the balcony and cause water seepage, the best solution is to install the faucet, reserve a variety of jack equipment, do not transform the balcony casually, the balcony is best to do a good job of waterproofing when decorating.

If it is not very serious, you can go to the labor market to find someone to brush some waterproof coatings to solve the problem, which is economical and affordable, and does not cost more.

My house is an old residential building, before the balcony wall seepage, but not too serious, I went to the labor market to find those workers to help me brush the waterproof paint, waterproof paint is I to buy my own, they just help brush, will not help you buy waterproof paint, but it is very cheap, you can save a lot of money.

Many people will encounter water seepage on the wall after decoration, I think it is not a good waterproof coating when decorating, we must choose a good paint when we do it, and we must go to the site to supervise the installation of workers when decorating the bathroom.

After decorating the new house, I found that there was water seepage, which was very serious, and the wall had to be thrown away and redecorated again, so that when decorating, I would buy some latex waterproof paint, which could reduce the water seepage, and I would also apply waterproof glue before the tile, and put a beautiful seam on the waterproof glue, so that it looks beautiful and not seepage.

I believe that many families have experienced water seepage on the balcony wall, so we should think of a way to solve the problem. Buying a waterproof glue to hit the wall is a good way to deal with it.

I have experienced the problem of water seepage on the balcony wall, at first I didn't know how to deal with it, when I missed many days, everyone seeped into the neighbor's house, I had to think of a way, but I didn't know how to deal with it, so I found a decoration company to deal with it, their solution is very simple, is to buy a waterproof glue to hit the wall.

Water seepage on the wall is a problem that will occur in many families, which may be caused by not paying attention to decoration or not using good decoration materials, so you should pay attention to it.

This kind of thing happens in our family, because the house is relatively old, it is an old brick house in the fifties and sixties of the last century, every time it rains heavily, there will be water seepage, and it is often damp, so we are very distressed, which has a lot of damage to the house, every summer when the waterproof paint is used to paint again, so it will be a little better, but every year there must be, so we are very difficult to do, so I hope you can use it in other ways, I hope you can say some other ideas, This is my opinion, and it is also what our family did back then, I hope it can help you.

Balcony wall seepage treatment method:

1. First of all, we must determine the place of water seepage, see if there are cracks, if there is a joint plug with the plugging king first, and then paint once or twice with a universal water-based waterproof coating, and then paint with a flexible waterproof coating, so that the problem can be basically solved. There is also a self-spraying can-like waterproof spray, which is sprayed on the exterior wall to form a waterproof film, which is also very effective, but be careful not to scratch it.

2. How to deal with the alkali return on the balcony wall The alkali return on the wall is generally too much moisture, and there are alkaline substances in the cement at the bottom of the wall, which is to close the base layer after scraping the waterproof putty, and the water vapor can not seep out, resulting in the precipitation of alkaline substances and salts in the bottom layer. You can roll a little oxalic acid solution onto the wall to fully neutralize it, and then wait for the wall to dry thoroughly before applying the primer topcoat.

3. If you need to repaint, then you should apply the primer before painting the topcoat, the primer is a chlorinated rubber product, which has strong waterproof and alkali resistance, which can improve the adhesion and durability of the paint film and the base layer, provide a solid foundation for the topcoat, and prevent the paint surface from changing color due to alkali corrosion.

Pay attention to the following points in the waterproofing construction of the balcony wall

1. If the balcony wall is waterproofed, you should consider which form to use. From the professional point of view of construction, there are two main types of wall waterproofing, one is the hydrophilic surface, also known as the practice of facing the water, and the other is the practice of backing the water. The difference between these two waterproofing practices is that the costs involved and the results achieved are different, and generally the effect of waterproofing on the surface is better than that on the backwater.

2. The waterproofing of the balcony wall should grasp the details, and special attention should be paid to the junction between the wall and the ground and the corner of the wall, which are easy to seep water. After the waterproof layer is done, the floor drain should be blocked, and the closed water test should be done on the balcony. If the balcony floor is higher than the drainage floor drain, the perimeter of the raised part needs to be plastered with cement grout.

3. Pay attention to the waterproof construction of the balcony wall, and after the overall wall is painted with waterproof coating, a batch of putty treatment should be done to protect the waterproof material. Waterproof coating is not suitable for long-term exposure to the outside, subject to ultraviolet temperature and humidity changes, accelerate the aging of the coating, exposed to the outside will generally come out of a year cracking, lose the original design of waterproof effect.

Answer: What should I do if the waterproofing is not done well, and the leakage caused by the wall waterproofing is not done: If the bathroom leaks and leaks to the wall of the room adjacent to the bathroom, the wall is wet, and there is no leakage downstairs. In this case, the waterproofing of the bathroom wall is not done well.

Solution: Remove a row of floor tiles and a row of wall tiles near the nearest position of the wall root at the leakage, re-waterproof in this area, and construct in strict accordance with the operating procedures. In particular, be careful not to damage the previous waterproofing layer.

It's best to be able to test the waters. There is no problem in testing the water, and then re-install the bathroom wall tiles and floor tiles. Leakage caused by the lack of waterproofing at the bottom of the bathroom:

This situation is more troublesome. Because many bathrooms are sunken toilets. It is necessary to dig out all the backfills of the sinking pit in the leaking place, and there is a certain working surface to facilitate construction.

After the waterproofing of the bottom of the pit is done, there is no problem in testing the water, and you can backfill it again. And use cement mortar to level and remove this range of floor tiles, and then waterproof this part to ensure that there is no problem, and then lay the bricks. It is a leak caused by the water supply and drainage pipes

Find the source and replace the water supply and drain pipes. Pressure tests are carried out on the water supply pipes. After the installation of the drain pipe is completed, you can pour water into it to observe and make sure that there is no problem.

Of course, other waterproof layer damage caused by the repair of water pipes must also be repaired.

The solutions to balcony leakage are as follows;

1. First of all, you need to find the cause of water leakage, if there is a problem with the waterproof layer, there are usually two ways to deal with it: local plugging or overall re-waterproofing. However, not all water leakage situations can be solved by filling the leakage, and it is not necessary to re-do the waterproofing as a whole when encountering water leakage, and the specific situation needs to be analyzed in detail.

2. Replace the connecting parts. This is mainly for kitchen sinks, the biggest reason for the leakage of the sink pipe joint is that the cap nut of the faucet is loose, as long as the cap nut is re-tightened or replaced with a new gasket can solve the problem immediately. In normal times, it is necessary to prepare kitchen accessories to facilitate subsequent maintenance and use.

3. Welding interface. This is mainly for the leakage of water pipes, kitchen water pipe leakage to dig the wall tiles, find the joint part of the water pipe, find the leaking water, re-weld the water pipe joint, and then re-do the waterproofing of this range, and finally post building materials such as tiles and wall tiles.

4. If the leakage is small, the leakage area is small, and the leakage point can be accurately found, the method of repairing and plugging the leakage can be used to deal with it. The specific operation method is to pry open the tiles near the leakage part, expose the base surface, chisel the leakage point into a "V" groove, and use a special permeable crystalline repair mortar to repair and plug the leakage, which can be solidified in about 10 minutes, and then paint a kitchen and bathroom waterproof slurry around the repair place.

5. If the water leakage is serious, and the leakage area is large, or the specific leakage point cannot be accurately found, the problem can not be completely solved by filling the leakage, and then it is necessary to re-do the waterproofing as a whole. The specific method is to remove the tiles and other decorations on the surface as a whole, expose the base surface, clean the base surface and clean it, first repair and level the gaps or potholes with penetrating crystalline repair mortar, and then paint the kitchen and bathroom waterproof slurry as a whole. The waterproof layer is dry thoroughly, and the process of tiling is carried out after passing the closed water inspection.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

1. In view of the water seepage of the balcony wall, if the gap is not particularly large, you can choose to use cement mortar, and when the weather is fine, scrape a layer of Xianghan in the place where there are cracks, which is a conventional treatment method, but the symptom is not the root cause.

2. If you want to fundamentally solve the problem, through the waterproof company, use the waterproof coating and the waterproof membrane on the wheel, and apply it to the wall of the balcony to form a waterproof layer, which can be effectively waterproof and ensure that there will be no water leakage in 5 years.

3. For the exterior wall of the window, if there is no glue or a slope is formed under the window, when it rains, water will flow into the house. Drain the water in the window frame and re-glue the glass. Also look at the wall if there is a depression, it is best to fill the depression with water mortar, which can prevent the window frame from leaking.

Summary. Hello, the balcony wall seepage should first find the leak, mainly from the high of the roof to the low to find the leak, because the water flows to the bottom. Look at whether there are cracks in the roof, whether the original waterproof layer has aged off, and whether there are bubbles in the original waterproof membrane of the roof.

If the roof is only the original waterproof, only need to remove the leakage cm deep and clean it, water it with asphalt, now there is a finished asphalt coating film, and when it is sunny, it will basically not leak. If there is a waterproof layer, it is more troublesome, to remove the waterproof within the surrounding area, re-do the waterproofing, and pay attention to the original waterproof junction to do a reinforcing layer.

How to deal with water seepage on the balcony wall?

Hello, the balcony wall seepage should first find the leak, the main stool and from the high to the low part of the roof to find the leak, because the water flows to the bottom. Look at whether there are cracks on the roof, whether the original waterproof layer has aged off, and whether there are bubbles in the original waterproof jujube coil on the roof. If the roof is only the original waterproof, only need to remove the leakage cm deep and clean it, water it with asphalt, now there is a finished asphalt coating film, and when it is sunny, it will basically not leak.

If there is a waterproof layer, it is more troublesome, to remove the waterproof within the surrounding area, re-do the waterproofing, and pay attention to the original waterproof junction to do a reinforcing layer.

In this case, it is leaking from the roof, and the roof is re-made to produce water, and the water is not very good, and the circulation is not smooth.

How to do it. Re-build the roof and make the outlet lower so that the water flows faster and doesn't allow the roof to collect water.