The wall is a little damp and moldy, is there any good solution?

Solutions for damp and moldy walls.

First, use desiccant. The room is damp and dry, and activated carbon can be used to prevent moisture and moisture. You can use desiccant, activated carbon. There are many desiccants in supermarkets that are specially designed to prevent moisture and dehumidify. The most common types are moisture absorber boxes and dehumidification bags.

Two. Buy a vacuum cleaner that acts like a vacuum cleaner to concentrate the moist air and wait for the moisture to turn into a lot of moisture. Use an air conditioner to remove moisture.

Household air conditioners usually have a dehumidification function. However, the way air conditioners regulate the humidity of the indoor air is slow, usually taking two or three hours, which can make people feel cold indoors.

3. Dehumidify with lime and bamboo charcoal. With a small cloth bag, the amount of lime is put into a small bag and placed in various corners of the room. Lime itself has the effect of absorbing moisture and can also slow down the dampness of the room.

At the same time, lime has a disinfecting effect and serves two purposes. Charcoal dehumidification can be used repeatedly, but it is more useless and less effective.

4. When there is mold on the wall, you can first use a dry toothbrush to remove the stain, and then gently wipe it with a soft cloth dipped in alcohol, which can dry the wall and prevent mold breeding.

5. In addition, when the ratio of bleach to water is 1:99, mix the water agent, pour it into the spray bottle, and spray it on the moldy wall to solve the problem of wall mold. If it's still wet, start with 1:

20 proportions use bleach and water and apply it to the mold wall. After the wall is dry, sandpaper is used to sand the wall is sandpapered, a waterproof primer is applied, and finally a layer of latex paint is applied to it.

The above is an analysis of the causes and treatment methods of damp and mildew on the wall. People can solve the problem according to the cause of mold on the walls of their home. But whether it is mildew caused by not making a waterproof layer, or mildew caused by improper use.

People need to take care of their daily routine of cleaning their rooms regularly. It is important to know that this is the main way to prevent dampness and mildew. Clean corners, walls, and other areas that are prone to moisture.

This is one of the most important ways to delay the spread of humidity and lead to mold. So if you notice dampness in your home, don't rub it off, instead, wipe it with a dry cloth right away.

The best solution to this situation is to contact and coordinate with the developer to do a good job of external wall insulation, if it is impossible to do it because of the delivery time for a long time, then you can only take some means of internal decoration to make up for it, such as repainting the wall, thickening, etc. In addition, you can also use some wall building materials with good moisture absorption function. Wall paints with very good moisture absorption properties can be used.

First of all, the house should be ventilated more, and secondly, do not put some buckets nearby, it will dry out when it is slowly wet

The wall is a little damp and mildew, mainly to see which walls, if it is next to the bathroom around must pay attention to the ventilation of the bathroom, as far as possible to open the ventilation of the bath bomb, if all the walls are damp and moldy after squatting on the ground, you must pay attention to the humidity of the cloth, not too wet.

Summary. The treatment method of damp and mildew on the wall: 1. Usually take alcohol or 84 disinfectant to clean up, if the mildew is not serious, the mildew is very few, then take a brush or dry rag to brush off the mildew on the wall, if it is a wet brush or rag will make the mildew more serious, and then take the rag stained with alcohol to wipe carefully, note that if the alcohol is 80%, the corresponding protective measures must be taken during the operation, and the window must be opened for ventilation.

2. Use bleaching powder, if there are a lot of mildew spots on the wall, you need to use bleaching powder, wipe it with alcohol, mix the bleaching powder with water according to the ratio of 1 to 99, and then pour it into the spray bottle, and finally spray it on the moldy wall.

The treatment method of damp and mildew on the wall: 1. Usually take alcohol Qishen or 84 disinfectant to clean up, if the mildew is not serious, the mildew is very few, then take a brush or dry rag to brush off the mildew on the wall, if it is a wet brush or rag will make the mildew more serious, and then take the rag stained with alcohol to wipe carefully, note that if the alcohol is 80%, the corresponding protective measures must be taken when operating, and the window must be opened for ventilation. 2. Use bleaching powder, if there are a lot of mildew spots on the wall, you need to use bleaching powder, wipe it with alcohol, mix the bleaching powder with water in accordance with the ratio of 1 to 99, and then pour it into the spray bottle, and finally spray it on the moldy wall to detect the dust.

Careful treatment of damp and moldy walls in the house: 1. First use sandpaper to polish and smooth the moldy and falling off places of Zhaoxiao, and shovel off the moldy wall with a shovel until you can see the cement layer or brick layer. 2. The cleaned wall is often not particularly smooth, and the putty must be re-brushed.

After the putty is brushed, the primer can be applied. 3. After drying, you can paint latex paint, diatom mud or wallpaper according to your personal preferences.

Methods to prevent dampness and mildew on the wall: 1. Use dehumidifier, if the room is damp, you can use desiccant and activated carbon to prevent and absorb moisture. It is also possible to use desiccant and activated carbon.

There are many desiccants in supermarkets that are specially adapted for moisture-proof and dehumidification, and the more common ones are moisture-absorbing boxes and dehumidification bags. Repentance.

2. Buy an air dehumidifier, it is like a vacuum cleaner that can directly concentrate the humid air together, and when the humidity is high and hungry, it will naturally turn into water. Household air conditioners usually have dehumidification functions, but the way the air conditioner adjusts the indoor air humidity is relatively slow, it takes two or three hours, and it will make people feel that the room is still very cold. 3. Use lime and bamboo charcoal to dehumidify, use a small cloth bag to fill with an appropriate amount of lime, tie it into a small bag and put it in all corners of the room.

Lime itself has a hygroscopic effect and can also reduce indoor humidity. At the same time, lime also has a disinfecting effect. Bamboo such as limb charcoal dehumidification can be used directly and repeatedly, if you use too much, the effect is not very good.

4. When the outside moisture is heavy, the doors and windows should be closed first to prevent moisture and moisture. In normal times, it is necessary to open more windows for ventilation in order to reduce the indoor water vapor content, especially in newly renovated houses, where the water vapor is relatively large, and more ventilation must be done.