What should I do if the kitchen sewer pipe interface is leaking?

Here's how:1. If it is a PVC water pipe, you can buy a PVC water pipe to connect it yourself, first cut the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross connection distance (length) and then disassemble it, and use PVC glue to apply it to the inside of the two ends and the outside of the two sewer pipes.

2. You can buy waterproof tape to repair the sewer pipe, wrap it up, and then use mortar waterproofing agent and cement to wipe it on.

3. It's better to find a professional company, if you can't handle it yourself.

1. It may be that the water pipe is broken, if it is not a big crack, it can be repaired directly, if it cannot be repaired, you can go directly to the hardware store to buy a new one, of course, you must be careful when installing, as long as you follow the steps to solve it. 2. You can check whether there is a gap or looseness at the interface, if there is, you can use glass glue to glue it, wait for the glue to dry completely, and open the faucet again to observe. 3. If you still can't solve the fundamental problem, you can directly call the maintenance center and let a professional person check it specifically.

Causes of leakage in the kitchen sewer pipe interface:

1. It is very likely that when washing things in the pool, the hard things are discharged by mistake, which leads to the wear or damage of the sewer pipes inside, and then after a long time, more serious problems will slowly appear, such as rupture, and then cause water leakage.

2. Or the sewer pipe has been used for a long time, and no maintenance work has been carried out, so there will be aging.

3. Maybe the installation was not in place at the beginning, or the sealing of the sewer interface was not done well when it was installed, so there will be gaps when it is used for a long time.

Make sure that the water is leaking from the **. If it is only leakage, under the premise that the pipe is qualified, the joint can be replaced or the leak-proof sealing tape and AB sealant can be added to the joint; If the tube is not of good quality, it should be replaced.

You can also coat a good AB glue in the leaky place, and then wrap the ribbon on it, so that the ribbon is soaked with AB glue and then apply AB glue on the ribbon, and the whole process can be divided into two or several times if the action is fast.

Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaky place, and then wrap a layer of silk ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.

The sink is the most important transmission tool for kitchen sewage and is an indispensable part of the kitchen. What do you do if your kitchen sink is leaking? First of all, we need to find out the exact cause of the leaking kitchen sink.

If the faucet is leaking, then you only need to disassemble the red and blue logos of the faucet and replace the rubber pad inside, so that the faucet will not leak, which is very convenient and reliable.

Such a trivial matter is indeed a very troublesome thing for people who are not very proficient in kitchen construction. If the connection between the sink and the countertop is loose, and the water drowning on the countertop, causing it to leak into the cabinet, such troubles are also common. Workaround:

First of all, go to the building materials market to buy glass adhesive strips, because the sealing effect of glass glue is very good, and then seal the glass glue bought back at the junction between the sink and the countertop, so that it is solved, after using this method, you will no longer have to worry about the leakage of the kitchen sink.

If you want to use a convenient and fast way to deal with the leakage of the kitchen sink, you still need to learn more about the installation structure of the sink. It's not surprising that the drain pipe of the kitchen sink is leaking, so what is the best way to solve this problem? Whether it is the leakage of the upper interface, or the leakage between the sink sewer pipe and the underground sewer pipe, it is generally the aging of the rubber pad, or the use of even cracking, only need to disassemble the rubber mat and replace it with a new one.

If you don't see any leaks after a thorough inspection, it may be a problem with the sink itself, or a crack in the sink. Solution: Use waterproof putty to apply it, this is the simplest solution, and there is no need to change a sink, which is very simple and convenient, and it is also very practical.

Buy some waterproof glue and apply it to the leaky place, and if you can't do it, you can use the excuse from the new.

Basically, the only way to do it is to glue it or change the tube.

This requires a master to take a look at the direction of your pipeline, think about how to deal with it better for you, don't look at it, no one can tell you so accurately.

1. The interface should not be installed tightly when the connection is installed, so there will be loosening when it is used, and there will be gaps after a long time, so there will be water leakage. Or when you wash dishes, you don't pick up the garbage when you discharge the sewage, which causes the sewer to be worn out, which can cause cracks over time. 2. It is also possible that the water pipe has been installed for a long time, and the use time is also very long, so there will be aging.

Suggested treatment: 1. Basically, there is a crack or damage in the sewer, if the crack is large, you can only buy a new one and replace it, if the crack is not big, you can buy some glue for cracks, and then solidify it, wait until the glue is dry, and then use water. 2. If the connection is loose, you can press it tighter, and use glass glue to tighten it, and don't touch the connection too hard.

3. If you don't know much about this aspect and can't find any faults, then you can contact the relevant technicians in time, so that they can send someone to assist you in repairing it as soon as possible.

If the kitchen sewer pipe interface leaks, you can use glass glue, raw tape, and iron wire to treat it, and apply the glass glue around the rubber ring of the sewer pipe, or wrap the raw tape in the middle of the sewer hose and the sewer leakage interface to enhance the sealing, and you can also wrap three to four circles of iron wire outside the hose to avoid water leakage again.

1. Glass glue treatment

Leakage at the interface of the kitchen sewer pipe, which may be due to the lack of sealing, can be treated with glass glue. Buy glass glue from the market, apply it along the rubber ring of the sewer pipe, wait for the glass glue to dry thoroughly and reinstall it, and the sewer pipe interface will not leak.

2. Wrap raw tape

If there is a leak at the interface of the kitchen sewer pipe, it can be treated with raw tape. Disassemble the hose and drain joint of the drain pipe, then wrap five to six turns of raw tape around the drain of the hose, and then install the hose and drain connector together to seal the leakage, and there will be no water leakage.

3. The wire is fixed

Leakage at the interface of the kitchen drain pipe may be due to the large gap between the drain hose and the drain joint, at this time, use the wire around the outside of the drain joint to wrap two to three times to fix the hose on the inside of the joint to avoid water leakage.

Treatment method of water leakage at the interface of the water pipe under the vegetable basin:

1. In the case of a small water leakage, first close the main valve, then clean up the debris on it with a dry cloth, seal it with glue, and finally tie it with tape;

2. If the water leakage is serious, then it is necessary to replace the new sewer pipe to prevent the water leakage from becoming more and more serious.

Kitchen leakage is a very headache for the cleaning and sanitation of the kitchen, and there are two main reasons for the leakage: 1. Leakage at the faucet outlet 2. Leakage at the connection between the faucet and the water pipe.

1. In addition to the sealing rubber ring with the drain leakage belt, it is necessary to play some porcelain white glue (or glass glue) around the rubber ring to strengthen the sealing.

2. Seal between the drain and the drain hose, some of the drain hose may be slightly thicker than the drain joint, you can wrap some raw meal tape between them to strengthen the seal, and you can also use some wire winding and reinforcement in the outer ring.

3. Between the sewer hose and the ground sewer pipe, there is usually no need to take a special sealing form, if in order to prevent odor and insects, you can wrap transparent tape at the interface between the hose and the ground pipe to seal.