What is your opinion on whether the bay window will leak after it is knocked out?

It is necessary to confirm the structure of the bay window, some of which are brick.

As long as the waterproofing measures are done well, it will not lead to the exterior wall upstairs. And if the structure of the bay window is together with the frame of the house, it cannot be smashed at all, and there will be safety hazards if it is smashed.

Many people smash the bay window, make a row of cabinets underneath, and save space and practical, the position of the bay window is without water pipes, so it will not leak, but the outside waterproofing must be done; Then apply 2 coats of waterproof paint to this red brick.

In winter, the windows are foggy, there is a lot of airflow and water, and the cement slab under the bay window in two winters.

The cement is gone, the insulation is not good, the wall is still moldy, and the rain will flow into the house from below in the summer. Whether the bay window can be removed can only be determined after being inspected by professional construction personnel. For the bay window that cannot be removed for waterproofing, you can shovel off the original plaster at the connection of the bay window, window frame and wall, which is about 15 cm wide, and the red brick can be exposed after shoveling.

If you are worried that the waterproofing of the bay window is still not very effective, you can use waterproof sealant.

If there are gaps on the outside, you can use waterproof paint to do it, and you can consider making a drip groove at the top and bottom, which can prevent water accumulation at the top and bottom. If you need to do waterproofing, the edge of the bay window is generally close to the outside of the window, and it is easy to float in when it rains, and the bay window cabinet or bay window cover inside will be soaked or cracked over time.

If the tile surface is to be checked first, check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use the stone tile waterproof guard to do waterproofing) The bay window must be made of waterproof layer, because three sides are equipped with glass, and the height of the window sill is lower than that of the general window sill. This design is popular in recent years because it is conducive to increasing daylight and has the effect of visual extension, making the space appear larger.

This varies from case to case. If it is a real bay window, it will leak after it is knocked out, and a fake bay window will not have such a consequence.

I don't think the bay window will leak after it is knocked out, because the bay window is in the room, and there is very little water in the bedroom.

I thought it would definitely leak, and if I knocked it out, then there would be no protection, so it would definitely leak.

After the bay window is knocked out, it will not leak, but it must also be waterproofed, and the bay window is generally embedded and does not extend outward, so it will not leak.

It will leak, because after the bay window is smashed, it is equivalent to smashing the waterproof and thermal insulation layer of the exterior wall, and the developer, the property is generally not allowed to renovate the bay window, so it is said.

The bay window built by the developer with bricks in the later stage can also be demolished. The outer bay window must not be demolished, this kind of bay window is linked to the stability of the wall, plays a certain balancing role, and some are also linked to the air conditioning pipeline, the removal may be endangered, and it will be repaired at that time, which is very troublesome. There is also a bay window made of reinforced concrete, which can never be demolished, the steel bar means that it plays the role of the wall load-bearing, and the whole building, are related, if once demolished, it is likely to produce the collapse of the house.

After the bay window is smashed, the waterproofing of the exterior wall will also be destroyed, so that when it rains, the rainwater will seep into the house, and the protective layer of the outer cavity will also be destroyed, so that the warmth of the house will be reduced, and the cold in the house will be felt in winter.

The bay window is not only good ventilation and beautiful, but after a long time, the bay window will show a leaky potato bend, today I will take a look at what to do with the bay window leakage and why the bay window will leak.

1. What should I do if the bay window is leaking?

1. If it is the reason for the window, the window can be repaired or replaced directly. If it is a problem with the cement mortar next to the window frame, you can use cement or other materials to repair it or reinstall the drip trough, so that the sailor can smoothly discharge it through the drip trough.

2. You need to check the connection of the window, you can wait for the rain to dry out the outside of the sealant to see if there is a useless foam filler between the window and the wall.

3. Look at whether there is a hollow drum in the outer powder, if there is a hollow drum should be removed and repainted, if there is no hollow drum, you can do a penetrating waterproofing agent treatment on the inner and outer facades. If it is a tile façade, you can first use waterproof putty to hook the tile joints, and then do a penetrating waterproofing agent treatment.

4. Use the rainproof board to deal with the joint part of the window frame and the concrete body, the specific method is: when fixing with screws, the gaps and nail holes should be filled with sealing paste, so that the rainproof board is close to the concrete body.

5. Remove the sealing materials that are cracked due to aging, clean this part until there are no impurities such as oil, dust, stuffiness and other impurities on the surface, and then add a certain proportion of waterproof sealant with waterproof powder to mix it into waterproof sealing paste, which is used to fill the joints of glass and window frames.

2. Why does the bay window leak?

1. The drip groove of the bay window is damaged.

Generally, windows will have drip troughs, and drip troughs are an important drainage channel for bay windows. However, when the bay window is modified during the installation, the window moves outward and presses on the drip chute, causing rainwater to seep through the cracks in the window and wall.

2. The drainage hole of the bay window is blocked.

Generally, modern bay windows are equipped with drainage holes, but the drainage holes may be blocked due to installation problems, and this happens from time to time when installing bay windows. If there is heavy rain, the water in the bay window frame will overflow from the place where the bolt is installed.

3. There is a gap in the window frame of the bay window.

Loosening of bay window windows and window frames is one of the most common causes of water leakage in bay windows. With the increase in the use of bay windows and the quality of the windows themselves, the connection between the window and the wall will inevitably create gaps, and the cement mortar around the window frame may crack and cause rainwater to enter through the window cracks.

In order to prevent the bay window from leaking, it is necessary to pay attention to the waterproof treatment of the bay window when decorating, so as to prevent problems before they occur, which is the best solution.

1. What should I do if the bay window seeps water into it when it rains?

1. If there is water seepage in the rain of the bay window, it is necessary to check the specific location of the leakage, and then deal with it. If water leaks from the outside of the window, it is most likely that there is a problem with the seal, and the original sealant needs to be removed, and then the gap should be filled with foam filler, and then the sealant should be re-applied.

2. If it is the leakage of the bay window itself, then you need to look at the tiles of the exterior wall to see if there is a gap, if there is, you need to use a special caulk, fill it into the gap, and paint it with the same color as the exterior wall, you can prevent water leakage again.

3. In addition, it is also possible that there is a problem with the side wall of the bay window, and the time of its reinforced concrete construction is not the same as that of other exterior walls. Instead, wait for the other exterior walls to be poured before pouring the side walls of the bay window, which requires waterproof construction for the side walls to ensure that there will be no water leakage.

Second, who needs to deal with the water leakage of the bay window.

1. If the house is still under warranty, you can contact the developer to deal with it. Or let the property know and ask them to help coordinate with the developer. If the quality of the house itself is a problem, then the developer needs to contact the construction unit to carry out the repair work.

2. If it cannot be solved through the coordination of the developer, you can go to the relevant local departments to apply for housing quality inspection and make complaints. After the problem is determined, the relevant person in charge can be arranged to repair it.

3. If there is water seepage in the bay window when it rains, and it is determined that the quality is not up to standard during the decoration, then the owner is responsible for it. The owner needs to find the renovation worker at the time to repair it.

Summary: What to do if the bay window seeps water into it when it rains, and who needs to deal with the water leakage of the bay window, I will introduce it here first, do you understand it? If there is water seepage in the rain in the bay window, you need to find the cause in time to avoid trouble.

On rainy days, the bay window leaks, which is the more troublesome thing that every family with a bay window has to face, how to solve this matter, you can only find professional personnel to do waterproofing on the bay window, or seal all the gaps with glass glue, and generally you can fundamentally solve the problem of bay window leakage.

The reason is not complicated, but it is not easy to maintain, it needs to be constructed from the outside, involving high-altitude work, you must find professional waterproof workers, and you must also have experience in high-altitude work.

Repairs cannot be chiseled because the silt will fall and there is a safety risk, so it can only be done on the base of the existing façade. To consider the reasons for weather resistance and adhesion, it is recommended to take two steps, the first step is to use high adhesion and strong weather resistance epoxy for waterproofing, and the second step is to protect with waterproof mortar and raise the base surface to form a drainage slope. No water accumulation, no leakage, combination of anti-drainage.

Hello 1

The waterproof design of the bay window was not considered at the beginning, and the original design only considered the waterproofing of the top of the bay window and the intersection of the exterior wall, ignoring the waterproofing treatment at the interface of the connection of different materials. The decoration of the façade of the exterior wall is richer than before, the lines are also increased, and the temperature expansion coefficient of various materials is not the same.

On rainy days, the bay window is always seeping water, is there any way to solve it? If the bay window is always seeping water on a rainy day, is it because of the direction of the window?

If you don't want to redecorate, it is recommended to leave that area vacated so that the tiles don't fall and hurt people.

Add another layer of glass to the outside of the bay window so that no water can seep in.

Many people will not notice the problem of water leakage in the bay window when buying a house, when it rains more on a cloudy day, the bay window seeps, and everyone realizes that it is time to waterproof the bay window, but at this time the water seepage has already happened, if we are in.

This seepage is difficult to deal with, if you want to solve it completely, it is best to test first to find the leakage point and then deal with it, after all, the insulation layer of the exterior wall is very thick now, and the leakage point will be very troublesome to find.

The bay window is leaking, ** it is likely that the air conditioning position upstairs is not connected to the water pipe, you should contact the property to check whether the air conditioning position on the exterior wall is not connected to the water pipe, and whether there is a crack in the exterior wall that causes water seepage. If you can't find the leakage, you should contact a professional repair company to check it.

Answer 1: When we find that it will leak, we must first carry out waterproof leakage treatment, we need to remove the aging shell or cracked sealing materials, but it should be noted that there can be no oil, dust or other impurities on the surface.

2. We can go to the store to buy some waterproof powder, and then mix it with water in a certain proportion, its mixture has a very strong binding ability, which is equivalent to sealant. But when doing this, you need to make the surface flat, smooth, smooth, and free of chips and holes.

3. Or we can use structural adhesive to glue the connection position of the glass and aluminum alloy window frame, and then do a good job of reinforcement and sealing treatment at the leakage position, which can reduce the material aging phenomenon caused by the erosion of glass glue due to sun and rain.

Find a professional to repair it, you can't do it yourself.

1. Removing the inner bay window will have a certain impact on the entire wall and cause potential safety hazards, after removing the bay window, the waterproof layer of the outer wall will also be destroyed, so when it rains, the rainwater will seep into the room, if the water seepage is serious, it will definitely affect the waterproofing downstairs.

2. During the construction process, the position of the bay window is usually not poured into the other walls, and some joints are not firmly connected, If the bay window is forcibly removed, it will inevitably cause secondary damage to the wall, so that a gap is formed between the concrete partition wall and the outer wall, therefore, in heavy rain, it will definitely leak, which will affect the waterproofing downstairs.