How to clean the dirt on the floor tiles of the bathroom

1. Daily tile cleaning with dish soap and soap. Mul.

2. Add a certain amount of ammonia to soapy water, and add a little turpentine, a solution mixed together with these three substances, used to clean the tiles, and the luster of the tiles will be brighter. Mul.

3. If the tile is stained with oil stains, rust and soap stains, it can be cleaned with multi-functional stain remover. Especially in the gap between the tiles and the tiles, it is particularly easy to stain and is very difficult to remove, you can first use a stain remover to remove the dirt, and then brush a layer of waterproofing agent to avoid the growth of mold. Mul.

4. If the stains on the tiles are caused by coffee, beer, tea, ice cream, etc., they should be removed with sodium hydroxide or potassium bicarbonate solution. Mul.

5. If the stain on the tile is caused by ink and cement, remove it with dilute solutions such as hydrochloric acid and nitric acid.

1.Dish soap and soap can be used for daily cleaning;

2.Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny;

3.Polished tiles should be waxed regularly, with a time interval of 2 to 3 months;

4.If there are scratches on the brick surface, you can apply toothpaste to the scratches, and then wipe them with a dry cloth to repair them;

5.In the gap between the bricks and bricks, you can use detergent to remove dirt from time to time, and then brush a layer of waterproof agent on the gap to prevent mold growth;

6.Sodium hydroxide or potassium bicarbonate solutions are used for pollutants such as tea, coffee, beer, ice cream, and grease;

7.Ink, cement and other pollutants use dilute solutions such as hydrochloric acid and nitric acid;

8.For contaminants such as paints and coatings, special cleaning agents can be used.

Those have a certain amount of rust, so you need to use white vinegar to wash it, add some hot water to the basin and mix it with white vinegar and detergent, and then use this water to dip it in a brush to brush the dirt to clean it, remember to brush it again with clean water at the end.

<> oxalic acid can be used to corrode dirt on the ground and remove it easily. Or use toothpaste, because the ingredients contained in toothpaste can also remove some dirt, squeeze the toothpaste on the dirty floor, and then spread it evenly, and then brush it to make the dirt fall off, or use some acidic substances, such as vinegar, and laundry detergent, can achieve the purpose of removing dirt. You can also use soapy water to clean it, compared to some slight dirt, it is easy to clean it with soapy water, but if it is very dirty, very heavy dirt, you can only use polishing or waxing to cover it.

The cleanliness and hygiene of the bathroom is very important, if we do not pay attention to cleaning, there are easy stubborn stains on the floor tiles, and it will be very troublesome to clean up at that time. If there is stubborn dirt on the bathroom floor tiles, what methods can you use to remove them? Next, I will briefly introduce it to you.

1. According to the experts of Qeeka Home, if there is rust on the bathroom floor tiles, we can grind the vitamin C tablets into powder, sprinkle them on the tiles and then scrub them with water to remove the rust traces; Or we rub the lemon wedges on the rust stain repeatedly, remove the rust stain, and then wash it with soapy water. Or we dilute the oxalic acid solution proportionally, use it to corrode away the rust, and then clean it with water.

2. There are stubborn stains on the floor tiles, we can use toilet cleaner to clean them; Or we pour the Coke over the stain and after about half an hour, we wipe it clean with a cloth. If there is oil stains in the tile gaps, we can use candles to wipe along the tile gaps, which can not only remove oil stains, but also protect the surface of the tiles.

3. If the bathroom tile is yellow, we can wipe the yellowed tile with warm water, and then apply a layer of toothpaste on the tile, and after about half an hour, wipe it clean with a rag. Or we use laundry detergent, white vinegar, alcohol and edible alkali to mix and stir, and use it to wipe tile stains, and the effect is also good. If the bathroom tiles are moldy due to anti-fouling wax mildew, we can pour bleach into the stain, soak for about twenty or thirty minutes, and then wipe it clean with a rag.

Summary: How to remove the stubborn dirt of the bathroom floor tiles, I will briefly introduce it to you here. I hope that after reading this article, I can provide you with reference and help when dealing with stubborn stains in the bathroom in the future.

Summary. 1. Acidic solution method.

Take an appropriate amount of acidic solution and water and mix it in a certain proportion, dip it with a brush, brush it again, brush it back and forth several times, and finally rinse it with water. The acidic solutions on the market include oxalic acid, hydrochloric acid, phosphoric acid and other solutions, and gloves should be worn before cleaning the scale, because acidic solutions will be more or less corrosive.

How to remove limescale from bathroom floor tiles.

1. Take an appropriate amount of acidic solution and water by acidic solution method and mix it in a certain proportion, dip it with a brush, and then brush it, brush it back and forth several times, and finally rinse it with water. The acidic solutions on the market include oxalic acid, hydrochloric acid, phosphoric acid and other solutions, and gloves should be worn before cleaning the scale, because acidic solutions will be more or less corrosive.

2. There will be household cleaning detergents on the market according to the instructions, according to the instructions, you can take an appropriate amount of detergent and pour it on the rag to wipe the scale, if the scale area is too large, you can use a broom to take an appropriate amount of detergent to wipe, and finally rinse with water.

3. The toilet cleaner used to clean the toilet has a certain corrosiveness, but the decontamination effect is good. Spray the toilet cleaner on the surface of the limescale, brush it off with a brush after 5 minutes, and finally wash it with clean water. Remember: Wear gloves before cleaning.

4. Soap method to prepare soap, add a small amount of ammonia and a certain amount of turpentine mixture, dip it with a brush, and then rub it back and forth on the scale several times, and finally clean it with water. This cleaning method can make the surface of the tile more shiny and brighter.

Household ordinary dirt with vinegar will do.

Method: 1. Prepare a small pot of edible vinegar;

2. Use a toothbrush or other brush to dip the scale on the floor tiles with edible vinegar, and the dirt can be seen softened back and forth;

3. Finally, rinse with water. If the unclean area is not clean, you can brush it again a few more times.

Tiles are often stained by greasy, water embroidery, soap stains, etc., especially at the joints of ceramic tiles. In order to keep the porcelain surface clean and not damage the glossy porcelain surface, you can use a multi-purpose stain remover to clean it. In the gaps of the tiles, you should first use a toothbrush dipped in a little detergent to remove dirt, and then brush a waterproof agent with a brush in the gaps, which can not only prevent water seepage but also prevent mold growth.

Expand your knowledge (scale

Scale is mainly formed by the precipitation of salts such as calcium and magnesium contained in boiler feed water after being heated and sticking to the metal surface. The thermal conductivity of scale is very small, about 2 5% of ordinary steel, and the scale is formed on the heating surface of the boiler, which will greatly deteriorate the heat transfer effect and affect the efficiency of the boiler; It is easy to burn out the metal material due to local overheating, and even burst the pipe; It will aggravate the electrochemical corrosion, cause the scale corrosion of the boiler, and accelerate the damage of the heating surface. After the formation of scale, it should be removed by mechanical or chemical methods in time.

The effective way to prevent or slow down the formation of scale is to strictly control the quality of the feed water and take appropriate measures such as boiler water treatment and boiler blowdown.