Why does the water meter rotate fast and what should I do if the water meter rotates fast?

Reason:

1. Bad water habits When the water meter runs fast, you must first ask yourself if you have bad water habits. The average household water consumption is 3 tons per person per month, and it feels a bit wasteful to exceed this number, and I hope that everyone will be an energy-saving and environmental protection person to cherish the limited water resources. Water conservation.

It starts with me. 2. There is a leakage phenomenon in the open pipe Because of quality problems or negligence during installation, water leakage may occur in faucets, valves, interfaces, etc. at home, which can be easily found.

3. The toilet leaks quietly and silently Cause: The toilet on the market has a large span of tens of thousands from more than 100,000 **, and the quality will definitely be different.

According to the measuring principle

It is divided into speed water meter and volumetric water meter.

1) Speed water meter: A water meter installed in a closed pipeline, composed of a moving element, and directly obtained the power speed by the water flow velocity.

Typical speed water meters include rotor water meters and spiral wing water meters. There are single-beam water meters and multi-beam water meters in the rotor water meter.

2) Volumetric water meter: A water meter installed in a pipeline that consists of a number of chambers of known volume that are filled and discharged with fluids one by one and a mechanism driven by fluids, or simply a quantitative discharge water meter.

Volumetric water meters generally adopt a piston structure.

How do you judge that the speed of the water meter is fast, the sensitivity of the water meter is different, and the water meter will not rotate when it is lower than the sensitivity flow rate of the water meter. When you turn on a large stream, the meter turns fast. You get a 1L container and just look at the meter and see how much it goes.

After the water meter is disassembled, there is a small water wheel inside, the water meter is to control the speed of the water meter by pushing the water wheel through the water flow, after taking out the small water wheel, use a knife to cut each blade on the water wheel short 3 2, so that you can clearly see that the speed of the water meter has slowed down significantly, but be careful, don't cut too much, otherwise it will not turn! Try it all!

I think first, you have to go to the water company to talk to the water company, change the water meter, if this situation still occurs, then you need to check the water pipe to see if it will be the water pipe ** rupture, second, if everything is fine, there will still be this phenomenon, then you need to be vigilant to see if your own water pipe will be stolen by others, this situation is more common in electricity, but it cannot be ruled out that the water pipe will not, now people for their own interests, Anything will be done.

The water company changed it, I called it yesterday, and I changed it this morning, and I said that the water bill is too much, and I suspect that there is a problem with the water meter.

Turn off the main valve, and then find a home repair to change it quickly, you tell the water company that these are useless, they always think about them, and sell an extra ton is a ton.

Just change it! The water meter is only a few dozen yuan, which is much better than you dragging it down like this!

Find a water company to mediate... Water meter change.

Strictly speaking, the fast and slow rotation of the water meter has nothing to do with the pressure.

The rotation of the water meter is due to the impact of the water flow and the pressure of the tile vibration is large, and the water flow is fast.

If the pressure is low and the water flow is small, then the rotating one will be sold.

Therefore, the water meter is affected by pressure, and the speed of rotation is negligible.

The speed of the water meter has nothing to do with the water pressure, the main relationship is the speed of the water flow, which has a great impact on the speed of the water meter.

The speed of the water meter is mainly related to the flow rate, and the size of the flow is related to the water pressure, that is, the speed of the water meter is related to the water pressure.

The speed of the water meter is related to the size of the faucet. But it is also related to water pressure. Like what. It's all the same big. The high water pressure is the more water output per unit time. The water meter also runs fast. Otherwise, the water meter will run slowly.

The water meter is one of the flow meters, the flow rate is large, the speed is fast, the cross-sectional area is unchanged, the greater the pressure, the greater the flow, it should be faster.

It doesn't matter, it only has to do with the flow of water.

The reason is that the operation of the water meter requires energy and will never rotate out of thin air, so when this happens, you need to see the water meter slowly rotating, that is, the section of the water pipe from the water meter to the home leaks. Or there is a leak in one of the devices that use water in the home, such as solar energy, toilets, jugs, etc., and relevant inspections need to be carried out.

Close the main valve at home, disconnect the back of the main valve, and see if the main valve is leaking, so as to distinguish whether the water pipe is leaking, or the main valve at home is leaking, and determine which part it is.

Benefits of Water Conservation:

1. It can reduce water consumption and maintain the sustainable use of water resources.

2. Save the operation and maintenance costs of the water supply system, reduce the number of water plant construction, and reduce the investment in water plant construction.

3. Achieve the purpose of water conservation and emission reduction, and save the burden of related sewage treatment. Reducing the number of sewage treatment plants or delaying the expansion of sewage treatment structures enables the existing system to accept more users' sewage and reduce the pollution of receiving water bodies.

4. Enhance the ability to prevent drought, short-term water-saving measures can bring immediate results, while long-term water-saving can greatly reduce water.

5. Water conservation brings obvious environmental benefits, in addition to improving the carrying capacity of water resources and water environment, there are also benefits in beautifying the environment and maintaining the ecological balance of rivers.

Strictly speaking, the water meter rotates fast, very slow, and the pressure of the bush has nothing to do with the ridge barrier, the water meter rotation is due to the impact of the water flow and causes the pressure of the tile vibration, the water flow is fast, the pressure is small, the water flow is small, then the rotation will be sold, so the water meter is affected by the pressure, the cherry blossom branch is loud, and the fast and slow rotation is negligible.

Here's how to keep the meter from turning or slowing down:

1. Remove the meter by yourself, open the meter with a special tool for pipes, take out the gears inside, and rub the gears with a rough tool surface to increase friction when it rotates, reduce the speed of the water meter, and achieve the effect of slow or even no rotation of the meter.

2. The easiest way is to replace the water inlet and outlet of the water meter, and you will find that when you use water, the index is constantly decreasing and selling less. It's easy to check out, though.

3. Remove the water meter, and then put a small stone into the water inlet, not too small, too small will be washed out, not too big, too big to affect the flow rate, and then install it back, so that the water meter will not turn.

Precautions for the use of water meters:

1. The selection of a water meter of appropriate caliber should not only consider the diameter of the pipeline at the installation site, but also consider the size of the flow rate that is often used, and the flow rate that is often used is close to or less than the required flow rate of the water meter.

2. The installation location of the water meter should be convenient for disassembly and meter reading, and should be protected from exposure and freezing. At the same time, a valve should be installed in front of the water meter to disassemble and assemble the water meter.

3. During installation, the hemp wire, ore and other debris of the pipeline should be removed to prevent the water filter from being blocked, resulting in an increase in the indication error and affecting the water supply.

4. The liquid in the pipeline is corrosive or high-temperature liquid, which will cause the deformation of the movement, and the use of water meters should be avoided. <>

If your meter doesn't use water and still turns fast, there are a few possible reasons:

Water Leaks: There may be some unnoticed leaking pipes or faucets that cause the meter to turn and increase the meter count even when no one is using it. So, if your meter count keeps increasing and you're not using water, you may want to check for leaks in your pipes or taps at home.

Problems with the meter: It is also possible to have problems with the meter, such as aging, damage, or errors, which can cause the meter to count inaccurately or exceed the actual water consumption.

Altered water meters: Altered water meters can also lead to inaccurate counting. Some people will deliberately adjust the meter to make it run faster in order to steal water.

If you notice an abnormal meter count, you can contact your local water department or meter repairer to check and repair it. In order to avoid wasting water resources, we should also pay attention to water conservation and repair problems such as leaking pipes or faucets in time.

The reasons are as follows,1Poor quality of water meter The quality of the water meter is too poor, even if it does not use water, it will cause the water meter to move, and it is normal to walk an extra 3-5 square meters of water every month. In this case, it is necessary to find the original manufacturer of the property or water meter for relevant inspection and identification, and if this is really the reason, it is necessary to change the meter in time.

Inferior water meters, especially those who rent houses, should beware. Secondly, the service life of the water meter is 4-6 years, and if it is used for too long, it will lead to a decrease in the accuracy of measurement, the internal wear and tear of the water meter is serious, and the water meter is also relatively fast, so it is recommended that it is better to replace the new meter when the life expires.

2.Unstable water pressure If you live on the upper floor, you will know that because the pressure on the upper floor is too high, you need a secondary water supply. However, in the process of secondary water supply, because the water pressure is unstable, the moment we turn off the faucet, the water pressure of the pipe will rise immediately, and due to inertia, the water meter will rotate even if it is not in use.

In this case, the check valve can be solved by installing a check valve, which can play a role in preventing the backflow of water and solving the problem that the water pressure is not friendly and enough for the water meter to rotate.

3.Leaking toilet or water pipe The flush gasket in the toilet tank is not tightly sealed, which will cause water to flow slowly into the toilet.