Is it feasible to use high pressure grouting for the moisture return of the toilet wall?

Feasible. Due to factors such as uneven settlement of the building, resulting in deformation and cracking of the building structure, water leakage, in view of the repair of this situation, a new foreign leakage plugging construction technology - high-pressure grouting waterproof repair technology can be adopted.

High-pressure grouting construction principle: It is a special high-pressure grouting waterproof material injected into the concrete crack structure through high-pressure perfusion equipment at high pressure until all the gaps (including those that are imperceptible to the naked eye) are filled, and after encountering water (water injection) accompanied by cross-linking reaction, a large amount of carbon dioxide gas is released to produce secondary percolation, high-pressure thrust and secondary permeation pressure will press the elastomer into and fill all the gaps to achieve the purpose of stopping leakage, it can be said that the best one in the performance of plugging materials, high-pressure grouting construction characteristics: 1, highly finished product 2, Simple and quick to operate; 3. Reduce the construction time and the construction is not affected by the weather; 4. Non-toxic and non-polluting; 5. Save construction costs

Scope of application. 1. Plugging of deformation joints, construction joints and structural cracks in underground projects such as buildings, subways and tunnels.

2. Crack plugging of bridge piers, dams and hydropower stations, and reinforcement of external walls of concrete structures.

3. All kinds of water towers, pools, basements, family toilets, kitchen leakage and other seepage and plugging leakage.

4. Plugging leaks in tunnel excavation and mine construction, and plugging leaks in railways, tunnels and culverts.

5. Reinforcement of rupture zones and soft foundations. The waterproof plugging project adopts the advanced construction of "plugging, injection, sealing and prevention" measures and the combination of "grouting and waterproof coating". With advanced technology, plus with my products, you are foolproof.

6. Structural cracks, small honeycombs, and secondary construction joints are leakage and leakage.

7. Structural small cracks, small honeycombs, and secondary construction joints are reinforced.

8. Polyurethane foaming agent heat insulation spraying, water seepage geological improvement. For example, subway, tunnel, continuous wall, structure, etc., water seepage and leakage, and geological improvement at the entrance of the basement outer wall.

9. Structural cracks, small honeycombs, and secondary construction joints are leakage and leakage.

10. Structural fine cracks, small honeycombs, and secondary construction joints are reinforced.

If you want to deal with it fundamentally, you need to remove all the tiles and plasters on the wall. Find out if the cause is a leak in the water supply pipe, and re-waterproof the wall so that there will be no resurgence of moisture on the wall of the toilet.

Treatment method of slurry return in the bathroom: The floor tiles or surface tiles in the bathroom are not waterproofed and begin to be paved, and it is easy to return to the slurry. The solutions are:

1. Turn over the floor tiles or face tiles, redo the foundation waterproofing, and then re-lay them.

2. Waxing or polishing on the floor tiles or surface tiles, and then do another protection. This approach does not solve the underlying problem.

Basic waterproofing must be done before laying floor tiles or face tiles in the bathroom. If you don't do it, the surface under the floor tile or the surface tile that comes into contact with the cement is likely to have slurry, that is, the cement will penetrate up from the fine pores of the floor tiles, or the gaps that were originally filled with glue. There will be black spots or black joints on the surface of the floor tiles or surface tiles, which will affect the appearance.

It will become moldy after a long time.