Do you think the bathroom is leaking, can you choose high pressure grouting?

Water leakage in the bathroom is a distressing thing in the life of the home, and everyone feels very distressed as soon as the water seeps, and even the home does not meet, crying and making trouble between the floors. In fact, as long as everyone knows the three causes of leaking water in the bathroom, then it is very easy to solve.

The first is leakage of water from the water inlet. The way to distinguish the leakage of water at the inlet is that after the water seepage in the toilet is turned off, the dripping under the building stops. Turn on the water seepage in the bathroom, and the dripping water under the floor continues, and the drip frequency does not change.

This is the case of leakage at the inlet. The actual way to make it clear is to measure precisely according to the plumber's blow. It can be determined which water pipe is leaking.

Second, leakage from sewer pipes. The way to distinguish the leakage water in the sewer pipe is to flush the water in the sewer pipe such as the odor-proof floor drain, hand basin, toilet, etc., without sprinkling water on the road. The water flushed for 1 hour to observe the leakage under the building.

The frequency of seepage water is accelerated and exacerbated, and it can be distinguished as leaking water from sewer pipes.

The third type is the leakage of water from the waterproof layer. The way to distinguish the leakage of the waterproof layer is to plug the odor-proof floor drain, fill the road surface with water, wait for an hour up and down, observe the dripping condition under the building, if it is aggravated, it can be distinguished as the leakage of the waterproof layer, <>

The main performance of the three leakage methods is different, the leakage of the water inlet is mainly manifested as continuous dripping under the floor, and the leakage of the sewer pipe is generally aggravated after the application of drainage, such as after washing the sheets, sooner or later the water seepage is aggravated when the sewer pipe is washed, and the dripping is reduced when it is not needed. The leakage of the waterproof layer is mainly manifested in the fact that the leakage is not more serious, the shade of the water is more, there are some more serious dripping, the more the shower room, the gradual leakage and dripping under the floor.

There are three ways to repair leakage water: the leakage water at the inlet can be dismantled and replaced with the water pipe, and the original water pipe can be discarded, and the water pipe can be disconnected again, that is, the open pipe can be taken. The leakage water of the sewer pipe must be removed after the bricks are planed, and the sewer pipe should be waterproofed again and then applied, or the leaking sewer pipe should not be applied.

Or a waterproof casing, a high-pressure pipe should be sleeved into the leaking sewer pipe, and the water can go through the waterproof casing inner channel. When solving, it is necessary to close the middle part of the original pipeline and the new pipeline.

The leakage of the waterproof layer is generally manifested in many conditions. If the ground waterproofing is not done well, it is very likely to cause steam leakage at the gate, small blister wood floor, anti-sea wall, leakage and mildew after water showering the wall, and leakage to the bottom of the building along the gap between the concrete floor slabs of the pipeline. That situation is all the leakage of the waterproof layer, and there are generally more leakage points under the floor.

Solution: The waterproof layer leakage water can be treated without planing the bricks again to do waterproofing, and the waterproof engineering company gives the bathroom floor tile surface leakage water maintenance three customer products, including infiltration waterproof coating, caulking moisture-proof paste, plastic steel mud, three kinds of raw materials are applied to the surface of the floor tile to do waterproofing, and easily deal with all the problems of waterproof layer leakage.

I think that high-pressure grouting can be selected for bathroom leakage, but it is necessary to choose according to the size and functionality of the bathroom, so that you can distinguish whether it is suitable for high-pressure grouting.

No. Because high-pressure grouting is not suitable for solving toilet leaks, I don't think so.

For the leakage of water around the toilet pipe and the bottom plate, the use of high-pressure grouting can be solved.

The high-pressure chemical grouting plugging technology is to use the continuous high pressure generated by the grouting machine to pour the chemical liquid into the gap inside the concrete, and completely squeeze out the water in the joint, completely fill the gap, and achieve the purpose of stopping water.

Personally, I think that choosing high-pressure grouting will definitely solve this problem, after all, I think it is beneficial to be able to block in time.

Can't fix it. Because high-pressure grouting cannot leak water, it is necessary to use leak-proof materials.

I don't think it's clear or necessarily, I think even if I got it done at the time, it won't last long, because after all, there are seams.

Hello dear! We'll be happy to answer for you. Is it useful to use bathroom grouting waterproofing?

Kiss is useful, but not very useful. Waterproof glue injection in the bathroom can play a role in waterproof and plugging leakage in a short time, but it cannot completely solve the problem of water seepage in the bathroom. If the bathroom leaks, only glue injection will not be able to completely solve the problem, and there will be leakage problems after a long time.

Although the glue can be filled along the cracks and plugged in the gaps when the temporary object is left, when the water flows down, it will squeeze both sides, causing the water to spread outward and leak in the other direction. It is recommended to use waterproof paint or membrane to do waterproofing. If the bathroom upstairs is leaking, it doesn't make much sense to do glue injection work downstairs.

The upstairs residents should be allowed to rectify and re-waterproof the bathroom. Thank you for your patience. The above is all my reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy!

Bathroom leakage is a troublesome thing in home life, everyone feels very troubled as soon as the water leaks, and even family discord, upstairs and downstairs noisy. In fact, as long as we know the three causes of leaking water in the bathroom, it is easy to solve.

First, leakage of water from the inlet pipe. The way to judge the leakage of water from the inlet pipe is that after the toilet is closed for water ingress, the dripping downstairs stops. Open the bathroom to get water, and the dripping downstairs continues, and the drip frequency does not change.

Such leakage is the phenomenon of leakage in the inlet pipe. The specific method of determination is measured by the plumber pressure. It is possible to determine which broken pipe is leaking water.

Second, leakage from sewer pipes. The way to judge the leakage of water from the sewer pipe is to flush the water into the drain, hand basin, toilet and other sewer pipes, and do not pour water on the ground. Flush for 1 hour and observe the leakage phenomenon downstairs.

The frequency of water leakage is accelerated and aggravated, and it can be judged as leakage water from the sewer pipe.

The third type is the leakage of water from the waterproof layer. The judgment method of waterproof layer leakage is to plug the floor drain, put water on the ground, wait for about an hour, observe the dripping situation downstairs, if it is aggravated, it can be judged as the leakage of the waterproof layer, the three leakage methods are different, the leakage of the inlet pipe is manifested as continuous dripping downstairs, and the leakage of the sewer pipe is generally aggravated after the use of sewerage, such as after washing clothes, the leakage of the sewer pipe is aggravated when washing in the morning and evening, and the dripping is reduced when not in use. The leakage of the waterproof layer is not serious, the situation of yin water is more, there are some serious dripping, the more you take a shower, and the downstairs begins to leak and drip.

There are three methods of water leakage maintenance: the water pipe can be replaced for leaking water from the inlet pipe, and the original water pipe can be discarded and the water pipe can be reconnected, that is, the open pipe can be walked. Leaking sewer pipes need to be replaced after planing bricks, and then waterproofed and re-used, or not using leaking sewer pipes.

Or casing, use a thin pipe to cover the leaking sewer pipe, and let the water go through the inner channel of the casing. The middle part of the original pipe and the new pipe needs to be closed.

Water leakage from the waterproof layer generally manifests itself in many cases. If the ground waterproofing is not done well, it may lead to water stringing at the door, blister floor, anti-water wall, leakage and mildew after water spraying the wall, and leakage downstairs along the gap of the pipe floor. In this case, the waterproof layer leaks water, and there are generally more leakage points downstairs.

Solution: waterproof layer leakage can be solved without planing bricks to do waterproofing, waterproof company provides bathroom tile surface leakage water repair three customer products, including penetrating waterproofing agent, caulking waterproof paste, plastic steel mud, three materials are used together to do waterproofing on the surface of the tile, and easily solve all the problems of waterproof layer leakage.

OK. High-pressure grouting is suitable for leakage caused by waterproof layer breakage. It works very well.

Yes, this will solve the problem of water leakage in a short time, but the disadvantage is that the water will flow into the house, which will make the house flooded.

OK. In addition, it can prevent water leakage in the restroom and floor leakage.

You can choose this way, and the ground that comes out of this way is more waterproof, the sealing is relatively high, and it is particularly strong.

I think so. And this method can completely solve the problem of water leakage in the bathroom, and the effect will be very good. There are many families that use this method to solve this problem.

I don't think it's going to be very costly, time-consuming, and laborious.

OK. This allows the slurry to penetrate deeper. for better patching. And it will not damage the waterproof layer and cause leakage.

Yes, high-pressure grouting can fill leaks, and this method is effective for toilet leaks.

If the conditions are possible, it is recommended not to use high-pressure grouting. Because of the passage of time, there will still be water leaks. It is recommended to use Yuxiang brand waterproof coating to fill the leakage point.

If there is a loophole in the water pipe, it cannot be grouted, the grouting material will block the water pipe, and the most important point is that if the bathroom structure of your home is a floor slab, it cannot be grouted.

The grouting process is actually a chemical reaction process, after everything is ready, it is necessary to carry out a reasonable division of labor for the grouting work, select skilled technicians to prepare for the operation, and ensure that the grouting machine is running normally and the pipeline is unblocked.

Disadvantages of high-pressure grouting plugging:

This high-pressure grouting plugging method is still very high-tech in foreign countries, and the plugging effect is very good when plugging the leakage. The construction is a little more complicated, which will lead to a relatively slow speed of construction, and it is necessary for professional personnel to operate the plugging machine to achieve the effect, so generally speaking, for some small plugging, there is no need to use this method.

Carry out high-pressure line which destroys the grouting file to plug the leakage method:

1. To choose this method, you must investigate the site before you want to understand the construction situation on site, and at the same time, you must also find the leakage parts and gaps according to the causes of water leakage. Carry out construction according to its width, length, and depth, and make all preparations.

2. After all the preparations are completed, it needs to be operated by professional staff. Grouting from one end to the other, or from both ends to the middle, and when the pressure is more stable after the grouting is finished, the second grouting can also be carried out, and then the pipeline is removed for cleaning.