The windows of the house that have been renovated will leak, is there any way to remedy it?

You can underestimate such a thing, we can also call it a sealing film, some houses because it is an old house, the doors and windows are relatively old, and the rubber strip is directly aged, resulting in insufficient sealing, which is also the reason why even if the air conditioning and heating are turned on when sleeping at night, you can still feel the cold wind blowing. The biggest advantage of this sealing film is that it has a very good thermal insulation effect, paste it on the window, there is no wind at all, increase the sealing degree can prevent the cold, and you can no longer feel the cold wind when you sleep at night. The main reasons for the leakage of the windows of the old building:

Wooden windows leak air, which is caused by long-term deformation; For repair, you can remove the screws from the hinge, reinforce the window frame, reinstall the glass, and add putty to seal it. If it is a plastic steel window, it needs to be replaced with an aluminum alloy! It is an aluminum alloy window that can be replaced with a sealing strip.

<> the leakage of the windows of the old buildings is mainly caused by the long use time, the deformation of the window frame, and the poor sealing. It depends on the condition of the window, if it is repaired, it can be repaired to strengthen its sealing, find out where the air leaks, stuff some foam strips and the like, replace the seals, and apply sealant. Generally, the problem will be solved.

Of course, if the window is seriously leaking and the window frame is seriously deformed, it is better to replace it directly with an aluminum alloy window. Ventilation alone is not enough, because formaldehyde volatilizes for up to 3 to 15 years, and sometimes it is limited due to weather conditions. Ventilation plus benacrystal is the best choice, firstly, to reduce the concentration by blowing, and secondly, to reduce the concentration of beinacrystal, and secondly, to adsorb and decompose benacrystal for a long time.

The advantage of Benajing is that it has super decomposition ability, is not easy to saturate, will not cause secondary pollution, and can also completely decompose formaldehyde gas, which can last for many years, especially suitable for families with children and the elderly. If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, and then fill the gap with high-grade cement river sand, and finally do the finishing repair; Air leakage between the window sash and the window frame can be considered to add sealing strips, felt strips, etc.

The temperature is well maintained.

You can put foam glue on the outside of the window, so that it can be effectively closed, and you can also paste masking paper indoors, which can replace the adhesive strips on the window with some better sealing.

It can be sealed with window glue, which will alleviate air leakage and is very convenient.

You can find a professional team to make up for it, they can do a very good job to make the comfort of the house a little better.

Of course, there are opportunities for remedy, at this time you can consult some professionals, or you can buy some of these tools online, so that you can repair your windows.

There is still a way. You can check the window. Use plasticizer to plug the air leakage. This problem can be solved.

The sliding window can be replaced with sealing wool, and the installation part of the window frame is sealed with glass glue.

If the overall quality of the window is too poor, contact the whole window for a new one. A lot of window changes during renovation!

How to deal with the leakage of the windows of the building.

There are airtight adhesive strips on the market, which are used to seal all the gaps in the windows, and the windows after sealing are basically not leaking. If it is your own house, it is recommended that you replace the windows with new ones.

Based on the situation you described, you mean it's better to ask how to deal with air leaks in the windows of the building? In this case, I think if it's on the edge, you can use wave sealant, so it's fine, and if it's a leak in the window, then you can use tape to glue it.

The easiest way to leak air in a building is the window, the window leakage is not good to close, you can first pass the small honey directly on the window, it really doesn't work to find a professional to repair it, professional maintenance will feel imported some winter land breeze is very cold, keep warm. I wish you good health and I wish you well. House.

Go to the supermarket and buy a few rolls of sponge strips, open the window, stick the sponge strips along the window opening, glue them in parallel, flatten them by hand, compact, and then close the window, and the window with the sponge strips glued will no longer leak. And so on, simple and practical, once pasted, you can ensure that there will be no air leakage for three years, although the method is simple, but the effect is still relatively good, you can give it a try.

How to deal with leaky windows at home.

Depending on what material your windows are made of, if you need to change the sealing strip for a long time, the same treatment method is the same for broken bridges, if it is a wooden structure window, you only need to buckle the greenhouse outside the window.

Add cotton curtains or a thick cloth curtain.

2.Glue newspaper or tape to the gaps in the windows.

3.If the window gap is relatively large, you can use foam glue or glass to fill the window gap to prevent air leakage.

4.Ask a professional to change the seal.

5.Install thermal film or plastic film.

6.Double-glazed.

Spring has always been the peak season for decoration every year, because the climate at this time is mild, compared to other seasons is indeed suitable for decoration, but did you know? How to maintain the doors and windows after the renovation, so as not to let the hard-working house be ruined on it? Doors and windows can not only play a role in wind and warmth, but also protect family safety, so in daily life, special attention should be paid to the cleaning and maintenance of doors and windows in order to prolong the service life.

First, do not hang heavy items on the door leaf and avoid sharp objects bumping and scratching. When opening or closing the door, do not use too much force.

Second, when wiping the glass, do not let the cleaning agent or water penetrate into the gap of the glass strip, so as to avoid the deformation of the strip. Do not wipe the glass too hard, so as not to damage the glass and injure yourself. If the glass is broken, it is important to have it repaired by a professional.

Third, do not open the door lock with wet hands or splash corrosive solvents on the wooden door and door lock. When opening the lock or turning the door lock handle, do not use too much force. Hinges, door locks and other frequently movable hardware accessories should be tightened immediately when they are loose.

When the door lock does not open, you can add an appropriate amount of lubricating material such as pencil lead to the keyhole for lubrication.

Fourth, when removing the stains on the surface of the wooden door (such as handprints), you can use Ha Qi to wet it and wipe it with a soft cloth. Rigid cloth can easily scratch the surface, and when the stain is too heavy, you can use a neutral detergent, toothpaste, or furniture cleaning agent, and wipe it clean immediately after removing the stain. Do not rub the edges and corners of the wooden door often, so as not to cause the finishing material at the edges and corners to fade and break.

When removing dust from wooden doors, you can use a vacuum cleaner to remove it without using a soft cotton cloth. In order to maintain the gloss and service life of the wooden door, it should be cleaned and dusted regularly, and the surface of the wooden decoration products can be maintained with a special curing liquid.

Daily maintenance of doors and windows.

Clause. First, do a good job of sealing inspection and repair.

Balance holes are an important part of maintaining the tightness of windows, and they need to be protected in daily life. The balance hole is the hole used for drainage and pressure reduction of the window frame and sash of plastic steel doors and windows, and the daily maintenance should avoid debris blocking the balance hole.

Clause. 2. Clean up more often.

Blocked tracks and rusty doors and windows are factors that affect rain and water resistance. Therefore, in daily maintenance, it is necessary to pay attention to the regular cleaning of the track to ensure that there is no blockage of particles and dust; Secondly, it should be cleaned with soapy water to prevent rust on the surface.

Clause. 3. Precautions for the use of doors and windows.

Skill is also an important part of door and window maintenance. Pay attention to the use of doors and windows: when opening the window, push and pull the middle and lower part of the sash, so as to improve the life of the sash; Secondly, the casement window should not be pushed hard, otherwise it is easy to loosen the glass; Finally, the track window frame should not be injured by hard objects, otherwise the deformation of the window frame and track will affect the rainproof ability.

1. Window gap treatment.

If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, then fill the gap with high-grade cement river sand, and finally do the finishing repair; Air leakage between the window sash and the window frame can be considered to add sealing strips, felt strips, etc.

Second, the old-fashioned windows and windows are arranged with mezzanine.

For double-walled old-fashioned windows, the best thing to do is to fill the window-to-window intervals with sawdust, which can solve the moisture of the window and also block the strongest cold air at the bottom of the window. For the window cracks of such windows, they can be sealed with kraft paper and paste to ensure that the airtight temperature is extremely high.

3. Plastic steel windows with layers of plastic.

The plastic steel window has been used for a long time, and it is easy to breathe, and the gap at the interface is too large to be bonded. The best way is to paste a sponge around the window, and then cover the whole window with plastic, which absorbs heat and is airtight, and the temperature is well maintained.

If the gap is large, it is better to add a layer of plastic steel window to the original window.

Fourth, the installation of windows left over from the problem.

First of all, it is necessary to see whether the problem left by the worker installation is not in place or the product itself, the reason for the product should be found by the dealer, or the manufacturer, if the worker has a small problem during the installation, it can be disassembled and reinstalled; Or first clean the gap between the window frame and door cover and the wall, stuff it with styrofoam, then fill the gap with cement and sand, and finally repair it.