If you want to deal with the rain leakage in the bay window, what are the good suggestions?

Introduction: Most people like to design a bay window when decorating at home, these bay windows can lie on it in winter to bask in the sun, or lie on it at night to watch the stars are very good choices, but if the waterproof measures of these bay windows are not done well, it is easy to leak rain on rainy days, so what are the good suggestions for dealing with rain leakage? <>

If some bay window leakage is not very serious, only exists in the connection between the window and the wall, there will be a small amount of rainwater falling in, then this situation is not very serious, you can buy some waterproof sealant to apply between the window and the wall gap, but to coat it several times, so as to more effectively prevent rainwater from falling into the house, you can also use some glass glue to reinforce some air leakage. However, this method is only suitable for local rain leaks, and if the rain leakage is more serious, other methods should be adopted. <>

When it rains, the bay window leakage is more serious, to observe whether the window is not closed tightly, if these conditions are very intact, there is still a phenomenon of rain leakage, then there is no doubt that the waterproof measures near the window are not very good, if you want to improve this situation, it will take a lot of effort to remove the entire window again, check the internal situation, whether there are waterproof measures to do not be perfect or whether the quality of waterproof materials is reliable, but these should ask professional maintenance workers to check, redecorate, so as to improve the phenomenon of rain leakage. <>

In residential areas, in fact, many families will install a rainproof canopy roof for the outside of their windows, and these canopies are also to prevent rainwater from drifting directly into the room along the windows, and with these canopies, rainwater will also fall on them, thus creating an arc, and it is difficult for these rainwater to enter the room through the windows. This method is also very convenient, but the sound of rain falling on the roof of the shed is very loud, which is easy to cause a certain amount of noise, and it will also have a certain impact when sleeping at night.

Use adhesive strips for sealing, or you can choose a bay window with good sealing, protect it in advance, clean the drain in time, and remove cracks in time.

You can find a professional to repair it, or repair it, or you can use the equipment to repair it, or you can repair it yourself, or you can repair it with waterproof materials.

Nowadays, many people have bay windows in their homes, because bay windows can visually make the room look bigger, and bay windows can also make the lighting in the home better, so many people are very concerned about the decoration of bay windows at home. However, because when decorating the bay window, the bay window may leak for various reasons, which also makes many people feel very headache, because it is very inconvenient to repair the bay window leakage by yourself. So what should you do if the bay window is leaking?

Let's take a look at this issue together. <>

Because there are some drains at the bottom of the bay window, if the drain is clogged or installed in reverse at the beginning, then there is no way to let the water flow, and there will be water around the bay window when it rains. If such a problem occurs, it is necessary to find a professional team to overhaul it to see if it is leaking or poorly installed. There is usually a groove on the outer edge of the bay window, which can block the rain from drifting in.

But if the drip chute is damaged, then rainwater will seep into the room along the drip gutter. If this happens for a long time, the walls in the room will grow mold, fluff or peel. Therefore, at this time, the drip should be repaired as soon as possible, and the sink should keep the shape of the drip sink straight.

If the waterproof layer around the bay window is damaged, it will also cause the bay window to leak rain. But this situation usually occurs on old houses, because this situation generally occurs in disrepair. Therefore, the solution to such a phenomenon is to remove the hollow place on the surface of the wall first, and then repair it with cement and mortar.

However, this requires the entire outside of the wall to be pried open, so the amount of work is relatively large, and it is best to find a more professional repair team, so as to completely solve the problem of rain leakage. <>

If there is a relatively large gap in the window frame of the bay window, it will also lead to rain leakage, because the cement mortar next to the bay window will loosen after a long time, so the bay window will leak rain when it rains. So at this time, you can take a look, if the cement mortar next to it is loose, then you can use cement to repair it, if there is a problem with the window itself, then you have to replace the window, so if you want to make the bay window not leak, you must understand what caused the rain leakage, and then prescribe the right medicine.

At this time, you should do a good job of rain leakage prevention in advance, and you can also install some leakage-proof materials in this place, and the countertop can choose natural stone or choose a marble structure, and you should also do a good job of draining.

If you want to deal with the rain leakage of the bay window, you can fill the leakage with waterproof glue, or you can make a new bay window. You can make the bay window into a small lounge bar or a child's desk. It would also be nice to put a carpet on the bay window.

In fact, the bay window is a very unique color, we need to leave a good slope bottom in the decoration design, preferably against the water. Wei Qiang is best to use thermal insulation mortar for painting, if the bay window connection is not sorted out during the decoration, there will be water leakage in the later stage. The bay window leakage can not be solved for a while, so it is simple and rude, and a telescopic awning is installed at the top of the window, which is not expensive, the appearance is quite foreign, and the shape and color look like what you like, usually half-open.

When you buy a pack of cigarettes during installation, ask the master to seal the bottom.

I don't know the age of the house and the specific construction process, let's say it separately, the general bay window is concrete, since it is a leakage, then it means that the house has imperfect structural construction technology in the construction process, and there should be gaps on the concrete surface; exterior wall plastering layer construction or material quality problems; Aluminum quality problems or manual production problems of windows; If the angle with the outer wall is convex, then the rain that comes in will also be scattered outward along the outer wall or drifting, not inward, so you can avoid the appearance of rain leakage.

If the window frame is installed in a problem, clean up the original rubber dust outside, and then re-glue, if it is a bay window seepage, go to the window to see if there is a bulge, if there is a bulge, the bulge should be cleaned up, and then repainted. Most of the reasons for the leakage of the bay window are due to the different waterproof materials used when doing waterproofing during decoration, which leads to the leakage caused by the infirm connection of the joints. There is also a possibility that there are bubbles in the cement inside the tile when the tile is pasted.

When it rains, all the joints between the glass and the aluminum alloy window frame are sealed with structural adhesive, so as to strengthen the compactness of the glass glue and delay the aging of the material caused by the erosion of the glass glue due to sunlight and other corrosion.

Use waterproof powder to mix a certain proportion of waterproof sealant into a waterproof sealant with super adhesive force, and fill the joints between glass and aluminum alloy densely. Locally, use high-quality special glass structural adhesive to repair cracks and areas that are not tightly sealed.

If your bay window can be removed, then you can completely remove the window and apply a layer of waterproof paint, which can effectively prevent rain and seepage.

The glass should be sealed first, if the glass does not leak, then there will be no water on the bay window, and the most important thing is to check whether the glass is rotten.

Just take a 3m waterproof glue and stick it, which is simple, convenient, cheap and durable.

You can put some towels to block the leaky part of the bay window, or you can put some sponges to absorb water, which can deal with the rain leakage well.

We can use glass glue or seam to polish all the gaps in the bay window, and be sure to use some waterproof agent to wipe the perimeter of the window, so that the problem of water leakage can be solved.

You should first find the leaks and then fill them up in the good weather, and do so.

The gaps should be filled, the gaps around the bay window should be filled so that it does not leak.

A good rainproof equipment should be installed in the window, and the window must be closed in time, and it is best to choose a tighter window when choosing a window.

You should first find the leaking place, plug the leaking place with a rag, and then use some foam glue or glass glue to fill the leaky place when it is not raining.

If that's the case, I really recommend that you should change the windows, most likely because the windows are not well sealed, so there is a rain leak.

If there is a large gap between the bay window and the window frame, it will also produce rain leakage, and the dirt next to the bay window will be loosened if the cement mortar is not cleaned for a long time, and the rain will also produce rain leakage when it rains. If the economic conditions are superior, it is recommended to replace a window, which may also cause rain leakage due to the quality of the window itself. However, the final reason is that I hope you will prescribe the right medicine, before the decoration or do a good job of rain leakage, choose the marble structure of natural stone, and do a good job of waterproofing.

Apply some waterproof sealant: If some bay windows leak rain is not very serious, only exist in the connection between the window and the wall, there will be a small amount of rainwater falling in, then this situation is not very serious, you can buy some waterproof sealant to apply between the window and the gap between the wall, but to coat it several times, so as to more effectively prevent rainwater from falling into the house, and you can also use some glass glue to reinforce some air leakage.

The best way to deal with it is to apply a layer of glass glue to the leaky place, and you can also find professional workers to repair it, or you can use some adhesive tape to glue it, and you can also replace a piece of glass or a window.

Apply waterproof sealant, install water-blocking plates, etc. Coated with waterproof sealant, you can apply a layer of waterproof glue around the bay window; Install the water blocking plate and install it in the bay window to strengthen the overall adhesion.

You can use glue to glue the cracks together, choose a bay window with good sealing, use plastic film to plug the leakage, find the key to the problem, and choose the right material to deal with.

1. The hollowing of the outer bay window is the main reason for water leakage, because the sealing material used in the perimeter connection of the window width is not good, and the rainwater seeps into the room along the window frame. As a result, the interior wall veneer bulges and peels off and then becomes mildew and blackened, and the outer side of the bay window is not waterproof and sealed, causing rainwater to seep into the interior from the outside of the window sill under the action of the wind.

2. Due to the very poor quality of the sealing material selected for the bay window, the deformation cannot block the rainwater from the outside, so it slowly penetrates into the window. At first, the design of the inner bay window was not fully considered, only the waterproofing done at the intersection of the top of the bay window and the external wall was considered, and the waterproofing treatment at the interface of different materials was ignored.

3. There is another reason for the water seepage of the bay window, that is, when the bay window was originally renovated, the decorator was not so careful during the construction, which led to problems with the effect. During the construction of the side wall reinforced concrete partition wall of the bay window, the concrete of the side wall was not poured together with other exterior walls, but the concrete of the side wall was poured after the completion of the exterior wall.

The leakage of the bay window is mainly due to the design is not good, so it is best to ask a professional designer to design it.

Many people will not notice the problem of water leakage in the bay window when buying a house, when it rains more on a cloudy day, the bay window seeps, everyone realizes that it is time to waterproof the bay window, but at this time the water seepage has already happened, if we do a good job of waterproofing the bay window when decorating, then we will not prevent it from happening? Next, let's take a look at why the inner bay window leaks and how to waterproof.

First of all, let's take a look at the causes of water leakage in the bay window:

First, the waterproof design of the bay window is not well considered.

At first, the design of the inner bay window was not fully considered, and the initial design only considered the waterproofing of the intersection of the top of the bay window and the exterior wall, and ignored the waterproofing treatment at the interface of different materials. The decoration of the façade of the exterior wall is richer than before, the lines are also more, the temperature expansion coefficient of various materials is not the same, and the waterproof consideration is not in place, so it is easy to produce cracks at the interface, and the result is - water leakage.

Second, the construction details are not handled.

In layman's terms, it is the poor handling of construction details, and then some management shortcomings, so that a gap is formed between the concrete partition wall and the exterior wall, so that although the root is on the outside, the inner bay window will definitely leak when it rains.

Waterproofing practices for dealing with bay windows that leak due to lack of consideration:

The fixed body is additionally treated to the basal layer.

The rainproof board at the junction of the window frame and the concrete body should be close to the concrete body, and the screw cap of the screw and the hole of the concrete screw can be filled with polyurethane sealant. The basal layer also has to be treated with special treatment.

Install a water choke.

We can install a water barrier on the inside of the bay window frame.

Repair of bay window structures.

The drip groove structure is adopted at the top of the bay window to prevent water accumulation on the top of the inner bay window;

The standard of the waterproof layer should be to apply the waterproof layer, so that the end of the waterproof layer at the junction of the wall should also be sealed;

The width of the bay window should be repaired at more than 100mm; If it is not possible, then it is necessary not to use a waterproof layer of coated film, but to choose a thin waterproof layer, etc., and increase the drainage slope of the water pipe, so that you can take anti-condensation treatment on the top layer.

Causes of water leakage in the inner bay window and waterproof solutions for the bay window.

There are also problems such as improper construction and waterproofing practices of bay windows that cause water leakage due to material selection

Remove the original aged sealing material and clean the sealing part.

A certain proportion of waterproof sealant is mixed with waterproof powder, and then mixed into a waterproof sealant with super adhesive strength, and finally the joints between the glass and the aluminum alloy are filled densely.

Use structural adhesive to seal all the joints between the glass and the aluminum alloy window frame, so as to strengthen the compactness of the glass glue and delay the aging of the material caused by the erosion of the glass glue due to sunlight and other corrosion.

If you understand the causes and solutions of water seepage in the bay window, then you don't have to worry about the water leakage when the bay window leaks, because we know how to waterproof the bay window.