How much thickness will be added after the porcelain tiles are pasted in the blank room?

The thickness of the normal tile is about three centimeters, and if the wall is uneven, it will reach about five centimeters.

Generally, the thickness of the tile depends on the verticality of the wall; The vertical thickness of the wall must be small, on the contrary, the thickness of the wall must be increased if it is not vertical, because the thickness of the wall must also be increased if the wall is leveled. The vertical wall is generally tiled at about two centimeters.

Different communities, different real estate development of the real estate project floor height is not the same, even if the building height of the same community will have a certain difference, generally speaking, the floor tile tile tile using cement mortar dry paving method construction, the height of the tile and the base mortar is about four or five centimeters, after measuring the net height of the house using a tape measure, the value can be obtained, and finally the net height of the house after the surface layer of the floor tile is paved.

The space is slightly reduced, and there are no major changes - in general, the height is reduced by about 5 cm, and each wall is raised by 2-3 cm.

Generally, 15mm and 20mm will be added.

Before pasting tiles, you need to check the verticality and flatness of the wall, if the verticality and flatness are not good enough, then you need to make adjustments in advance to keep the wall as smooth as possible. In this way, the thickness of the adhesive behind the tile can be uniform, which is good for reducing the amount of adhesive used and improving ergonomics.

Generally, it will increase by about 15 mm to 20 mm. Before pasting tiles, you need to check the verticality and flatness of the wall, if the verticality is not good enough, then you need to adjust it in advance, as far as possible to keep the wall surface good flatness, so that the thickness of the adhesive behind the tile can be uniform. Reduce the amount of adhesive used and improve work efficiency.

It should be normal, the cement is thick, it is generally not empty, and if your wall is uneven, the concave place is 2 to 3 cm, and the convex place can't be pasted? Cement is also mixed by workers, and if he can save labor, he will naturally save labor. The wall tiles will become smaller, as long as they are flat and not empty.

This is very abnormal, the standard is 2 cm, the thickest is not more than 3 cm! The sticker is so thick may be caused by his level not finding a good one, or he is lazy and the brick is too small and doesn't want to make up! Look carefully and ask him why!

Do you see clearly--- is all 5-6cm in all places?

Because most of the walls are uneven. If you happen to see the area where the worker leveled, you are mistaken for him. Hehe. The thickness of the normal condition is around 3cm.

Generally not so thick, 2-3cm You ask him if it is looking vertical?

Generally, it will increase by about 15 mm to 20 mm. Before pasting tiles, you need to check the verticality and flatness of the wall, if the verticality is not good enough, then you need to adjust it in advance, as far as possible to keep the wall surface good flatness, so that the thickness of the adhesive behind the tile can be uniform. Reduce the amount of adhesive used and improve work efficiency.

The thickness of ordinary tiles is generally about 20-25mm, and the thickness of vitrified tiles is about 25-30mm.

1. Normally, it will increase by about 15-20 mm.

2. If you choose vitrified bricks, it will increase by about 25-30 mm.

3. The thickness of the bathroom tiles is not only the thickness of the tiles themselves, but also the thickness of the mortar of about 5 mm, especially the floor tiles, and the thickness of the mortar has increased a lot.

The thickness of the floor tile is generally more than two centimeters, for the choice of tile thickness, the thickness of the tiles used in different places will be different, such as the living room and the kitchen are not the same. The tiles should be soaked in water for half a day before use, and the bricks should not bubble. Ceramic tile is a kind of acid-alkali resistant porcelain or stone formed by the process of grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, which is called ceramic tiles.

Its raw materials are mostly mixed with clay, quartz sand and so on. Ceramic tiles are generally divided into three types: polished tiles, antique tiles, and porcelain tiles. The kitchen and bathroom should have a slope of flowing water, no water accumulation, and no backflow of water.

If the original waterproof layer is damaged during construction, it must be waterproofed, and there is no leakage in the 12-hour test of water accumulation.

After the floor tiles are laid, cover the brick surface with cardboard, etc., and walk on the brick surface for at least 24 hours. When pasting tiles, pipes, lamp switches, bathroom equipment supports, etc., must be cut and matched with a whole brick set, and it is forbidden to use non-whole bricks to patchwork and paste.

Pay attention when laying tiles

The excess adhesive material in the tile joint should be scraped clean in time, and the stains on the tile should be wiped off with a damp cotton cloth, and the adhesive material should not be wiped and cleaned after it is dry and hard, which not only can not be cleaned, but will damage the glaze layer if scraped off with a hard object. After the adhesive material is solidified, the joints can be brushed with white cement, gypsum mortar or color paste, and the mortar can be wiped and filled with cotton yarn.

The thickness varies according to the size of the brick, if it is an antique brick, it is slightly thicker, if it is an ordinary porcelain piece, the thickness is around the right, and the thickness of the floor tiles is generally paved in the home, and the thickness from the original ground to the brick glaze is 4cm-5cm. The thickness of cement sand, that is, the thickness of leveling, is 3cm. The thickness of the tile is 2cm.

In general, it's about in between.

Ceramic tiles are generally divided into three types: polished tiles, antique tiles, and porcelain tiles. The thickness of each type is different according to the size of the external size, the general 800*800 polished tile is about 9mm-12mm, and the Seiko jade is about 15-18mm; Porcelain tile *600 is generally about 7-10mm; The thickness of antique bricks and polished tiles is not too much.

Microcrystalline stone is a new type of decorative building material, in which composite microcrystalline stone is called glass-ceramic composite plate, which is a layer of 3-5mm glass-ceramic composite on the surface of ceramic glass fossil, after secondary sintering is completely integrated into a high-tech product. The thickness of microcrystalline stone is 13-18mm, and the gloss is greater than 95.

800 specifications of floor tiles in general the national standard is one centimeter thick, a box of three pieces is generally 50 kilograms, some small brand bricks are thin and light, we should understand, it must be cutting corners, either the thickness is enough density is not enough, or the density is enough thickness is not enough, so it will bring hidden dangers to the later use, resulting in seepage, fracture and other situations.

The thickness of the floor paving bricks is generally different according to the size of the bricks, if it is an antique brick, a little thicker in centimeters, if it is an ordinary porcelain piece thickness in the about, the general family paves the floor tiles, from the original ground to the thickness of the brick glaze is between 4cm and 5cm, the thickness of cement and sand is about three centimeters, and the thickness of the tiles is about 2cm, generally speaking, it is about 2cm.

The thickness of the floor tiles in the living room and bedroom is generally in, the kitchen, the bathroom should be a little thinner, the thickness of the yellow sand cement slurry is not less than 4cm, because the ground level is not absolute, so the thickness of the paving is not absolute, there may be a position of 3 4 points, some 1 2 points, anyway, the thinner the mortar, the greater the difficulty of construction (easy to knock on the bricks or hollow drums).

The thickness of the floor tile is generally about 8mm, and the thickness of the cement mortar layer below is about 30mm.

The mortar bonding layer or binder layer is 2 3 cm, the original floor to the finished surface is 3 4 cm, and within this range is watered according to the design and needs.

The mortar layer of 10mm brick belt shall not be less than 5 cm.

The thickness of ordinary bricks is about centimeters.

The thickness of cement mortar is about 4 cm on average.

After the floor tiles are applied, the total thickness of the bricks and cement mortar is about 5 cm.

According to the size of the brick, if it is an antique brick, it is slightly thicker, if it is an ordinary porcelain piece, the thickness is about the same, and the general family paves the floor tiles, and the thickness from the original ground to the brick glaze is 4cm-5cm.

The thickness of cement sand, that is, the thickness of leveling, is 3cm. The thickness of the tile is 2cm. In general, about before.

The thickness of the floor tiles is not only related to the thickness of the tiles themselves, but also the thickness of the cement mortar. The thickness of ordinary floor tiles is about 1cm, the thickness of cement mortar is 4cm, and the thickness of antique floor tiles is about, the thickness of cement mortar should be about 5cm, and the thickness control is more suitable for 5cm of floor tiles. In addition, paving tiles also need to pay attention to these points:

Arrangement of bricks, before the construction to determine the way of laying the floor tiles, a regular combination of the way to paste the floor tiles more beautiful and coordinated.

Tile laying order, before tiling the tile fully soaked in water, in accordance with the order of paving, to avoid the gap between the floor tiles is too large, resulting in poor firmness, affecting the service life.

The thickness of the floor paving bricks is generally different according to the size of the bricks, if it is an antique brick, a little thicker in centimeters, if it is an ordinary porcelain piece thickness in the about, the general family paves the floor tiles, from the original ground to the thickness of the brick glaze is between 4cm and 5cm, the thickness of cement and sand is about three centimeters, and the thickness of the tiles is about 2cm, generally speaking, it is about 2cm.