Should the wall skin of the rough house be shoveled off? How to deal with the powder off the wall of

The key to whether the rough embryo room needs to shovel the wall depends on the quality of the decoration, how to gently scrub it with your hands, there is a lot of white putty powder in your hands, which is enough to show that the wall should be removed, otherwise the harm to daily life in the later stage is very serious, indicating that the cohesiveness of this putty powder is very poor, and it must be treated. If the waterproofness and interior decoration of the wall are very good, there is no need to remove the wall.

Simply do a fun test, spray water on the wall putty, and gradually rub it twice with your hands, if the putty powder on the wall will be rubbed off, or there is a layer of sticky white paste in your hands, if there are these two situations, the putty powder must be shoveled off. If there is nothing to reflect after rubbing, it shows that your real estate developer is still conscientious and has used water-resistant putty for you, in this case, only the putty powder needs to be leveled, then there is no need to shovel, and there is no need to scrape a new layer, directly on the wall paint or wallpaper.

Of course, if you have a sufficient budget, if you want to ensure that nothing goes wrong, you can also choose to remove the wall skin, so that you can more intuitively detect the condition of the wall, such as cracks and cracks. All kinds of problems are discovered as soon as possible, and we can also clearly propose compensation and rescue, but if they are ignored and covered up, there will be some inconvenience in the middle and later stages.

How to deal with the powder on the wall of the rough room: the first delamination is very serious to be removed, and after the removal, use waterproof putty to wipe the blank wall to improve the cohesiveness of the wall, and then change the cement brush. In the past, the wall was too smooth and clean, and after the paint was removed, it was necessary to do grinding and polishing to remove the unstable outer skin and facilitate the bonding of the new architectural paint and the wall.

Special attention should be paid to the wall powder to solve the following batch of putty, each layer of putty powder must be thoroughly dried before the next actual operation, otherwise the water will evaporate in the middle and late stages, and the overall surface layer wall paint will be delaminated and cracked. At the same time, the putty powder should not be too thick, otherwise in the process of drying, the thickness will be inconsistent, which will also lead to cracking.

The key is the topcoat, the role of the primer is to resist alkali primer waterproofing, sealing the board, maintaining the paint, and improving the paint.

Personally, I think that the wall skin of the rough house needs to be removed, because it is difficult to ensure that there will be no peeling after applying other materials during subsequent decoration. If you want to make up for it, you will need to pay a greater cost. If the skin and powder are really peeled off, the wall skin can only be directly removed and cleaned, and then painted with protective paint, latex paint, etc. according to the process.

If the wall skin of the blank house is powdered, it must be shoveled off and coated with a waterproof coating, and you can choose the best paint.

It depends on the situation, to see the *** bad of the wall skin to make a decision, the wall skin should be shoveled off when the powder is off, and the putty should be scraped again.

When decorating the rough house, some people will plan to shovel off the wall skin, but some people feel that the wall skin is not necessary to shovel off, so must the wall skin of the rough house be removed? If you are sure to remove the wall skin, you should also be clear about the relevant matters, and what should you pay attention to when removing the wall skin?

1. Does the wall skin of the rough house have to be shoveled?

1. In order to facilitate acceptance, the general developer will fool around at will and use some inferior materials. It has already fallen off, and it must be removed in order for the wall to be paved smoothly in the future.

2. If you can rub it off or there is sticky white pulp on your hands, you should shovel it off. If it can't be rubbed off, it means that it is waterproof putty, and it can not be shoveled. If the waterproof putty is flat, there is no need to scrape the putty, and you can directly paste the wallpaper and brush the latex paint.

If it is not smooth enough, you can scrape another layer of putty or wall treasure to level it.

3. The putty made by the real estate agent for you is not very good, but it is only used to cope with the inspection. After a long time, it will be pulverized, cracked, and fall off, which must be shoveled, and you can know it by touching it with your hands.

4. You can see that the wall is swollen and warped, which means that the quality of this putty is poor enough and must be shoveled, otherwise the problem of the whole piece falling off after the latex paint is brushed will occur, and the wall is easy to fall off.

5. The general putty can also be maintained for a period of time without falling off or powdering, but after the decoration of other people in a building, there will be a certain settlement on the floor, and there will be cracks in the corners of the walls at that time. So as long as it is not waterproof putty, it needs to be shoveled off.

2. What should be paid attention to when removing the wall skin?

1. Before demolition, it is necessary to confirm the condition of the pipeline section in the wall, confirm that the wires in the wall have been powered off, and the pipeline has been cut off from water, and the construction can only be carried out after confirming that there is no problem.

2. Before the wall is dismantled and constructed, the template should be padded on the floor surface to prevent the floor from vibrating too much when the object falls. Erect structural support scaffolding on both sides of the wall, and the support distance from the wall is not more than 500mm.

3. If the demolished wall is connected with other walls, a ditch line should be drawn with a cutting machine first, and then manually chiseled to ensure the specification of the demolition demarcation line and avoid other walls being damaged due to vibration during demolition.

Does the wall skin of the rough house have to be shoveled off? When you want to shovel off the wall skin of the rough house, it must be necessary for decoration to achieve a better decorative effect. What should I pay attention to when removing the wall skin?

Pay attention to the relevant matters when removing the wall skin, and at the same time ensure the effect of the wall skin removal, and do not easily remove the wall skin.

When many owners renovate their new homes, most of them will remove the original walls. Especially for decoration companies, decoration is basically a process of shoveling wall skins. Many owners think that it will cause some damage and are not in favor of doing so.

Next, let us introduce it to all of youRough house shovel wall skin1. Do you shovel the wall skin of the rough house?

1. Shovel wall skin for the blank house 1, shovel wall skin is originally for the original lime wall, this kind of wall is relatively poor in terms of stability and water resistance, so it will be removed during the decoration period, and the removal of decoration will not affect the later work. The construction of surface putty affects the problem of holes in the walls and how they fall during use. Today, many conscientious developers use wall paints coated with new latex paint.

Water resistance, stability and quality are good. You don't have to worry about some quality issues, so don't remove the lid from the wall.

2. If the rough house shovels the wall skin during the decoration process, it mainly depends on whether the construction quality of the putty wall, wall structure, wall and other aspects has met the requirements, especially the original putty wall, if waterproof putty is used, then basically, there is no need to remove the wall, but if non-waterproof putty is used, it should be removed. Otherwise, it will be affected by the environment during use, and problems such as mold will appear on the walls. If it's not waterproof, you can sweep the walls with a broom.

If there are noticeable droplets, it is a non-waterproof putty, or you can pour mineral water directly into the wall. Water does not flow directly downwards to expand the range of water filtration. It is also a putty that is not resistant to water.

Delete redo. 3. If the wall putty has problems such as falling, hollowing, etc., it means that there is a problem in the structure, and it also needs to be shoveled from the wall and redone. If there are cracks in the wall, it is likely that there is a problem with the wall structure. It is all the more necessary to shovel the wall to find out the cause and repair it.

Second, shovel the first orange beam of the wall skin.

1) Precautions for shoveling wall skin: watering and moistening the wall should not be too much, as it is easy to form water on the ground. After wetting the wall, wait for the putty layer to be moistened and then wait for 10 minutes before shoveling, so as to avoid the putty being too wet and not good to tidy up.

2) Precautions for shoveling wall skin: do not use too much force when shoveling, and use dexterity to avoid damaging the tool when touching unevenness. When shoveling the balcony and encountering a soft wall, you can switch to a bricklayer's ash shovel, and have the conditions to protect the windows and doors, and tidy up later.

The above content is all the introduction to the precautions for shoveling the wall skin of the rough house and shoveling the wall skin, I believe that many friends have seen it, but also understand it clearly, in fact, shoveling the wall skin is also a handicraft work, not everyone can shovel it, so when shoveling the wall, you must find a professional master to get it, in this way, you can lay a good foundation for the next process, and it will also save money for the next process, at the same time, here, I hope the above elaboration can help more friends.

It is best to carry out the demolition, which is as follows:

If the wall of the original rough house is a cement wall, this kind of wall does not need to be demolished, and only needs to be directly carried out on the wall in the later stage of the process operation of standard wall coatings such as glue, putty, and grinding;

If the wall of the original blank house is white or white, it is best to remove it until the cement wall is exposed, and then the standard process of wall coating is made, for the following reasons:

1. The putty on the original wall is not made in the standard process, and the workmanship is not up to standard, so it cannot be directly brushed on the surface for operation, so it needs to be removed;

2. The putty on the original wall, due to the long construction time, the dryness of its moisture is relatively dry, and the paint brushing on it can not ensure its long-term quality assurance, so it needs to be removed;

3. The putty on the original wall, due to the long construction time, the surface may fall or be contaminated with floating dust, so direct brushing of the paint may affect its appearance and quality, so it needs to be removed.

If it is a rough house, the developer's white walls are just for the delivery of the house to look good (it seems that the light is better), in fact, the quality is average, and it is not an environmentally friendly material, if the house is self-occupied, it is better to shovel out all the decoration.

The first thing you need to do when you get your new home is to think about renovating. Good design and precise construction can make a home warm and beautiful. The first problem faced in decoration is wall decoration.

Before the renovation begins, many people will make major changes to the walls, such as shoveling wall skins in a rough house, but is this absolutely necessary? Look at the analysis.

Shoveling wall skin in a rough house is a good foundation for future wall decoration. In fact, the shovel wall skin of the rough house is the basic treatment of wall coating, which should be counted as a concealed project.

There are several reasons for shoveling wall skins in rough houses:

First, the rough house shovel wall skin can see the quality of the house itself.

Nowadays, many unscrupulous developers do not have mesh or cement mortar ratios to save money. After shoveling the wall, the sand on the wall will continue to fall.

Second, the putty powder used in the house used in the past was the cheapest on the market.

In order to cope with the inspection and acceptance of the house, the putty powder is not of good quality, the glue is low, and the glue in the putty will peel off after the time expires.

Third, before the developer put putty, the grassroots ** was not in place.

Basically, it can be said that it will not be treated. After a long time, it will be removed from the cement. It's like putty peeled off a drum.

Fourth, the early grassroots ** is not in place.

When the house goes through the heating season or when it is overcrowded, the building sinks, causing cracks to appear in the house.

90 rough house renovation needs to remove the original wall skin, because most of the putty powder of the new house is not for life, but for the homeowner to inspect the house, so this is why the new house should be removed before renovation, both for beauty. But more importantly, in order to ensure the quality of later decoration, there are also many homeowners who directly push off the putty or brush latex paint. As a result, the wall surface falls off in less than five years, and in the end it has to be shoveled off, which is costly and frustrating.