Why isn t the shower room capped? The reason why the shower room is not capped is revealed

Updated on home 2024-07-13
7 answers
  1. Anonymous users2024-02-12

    First of all, the shower room is a completely sealed space, and the water vapor produced during the shower.

    It cannot be dissipated, and it is easy to form a "high concentration of steam" shower space, which will cause chest tightness if you are in such an environment for a long time.

    and poor breathing. The uncapped design allows the water vapour to dissipate slowly rather than gather completely. In this way, it can not only ensure the leakage of warm water vapor in the shower room, so that the heat will not be lost quickly, but also ensure good ventilation, so as to avoid dizziness and difficulty breathing due to too long bathing time, high temperature and humidity.

    Wait. Secondly, the design of the cap is easy to cause waste of resources. When capping, it goes up against the ceiling.

    Below the ground, the glass of the shower room needs to be disassembled, cut and reinstalled according to the actual height, resulting in unnecessary waste. The fully enclosed design also inevitably installs exhaust equipment to maintain air ventilation and convection, but this will inevitably increase the decoration cost and affect the overall appearance of the shower room.

    Finally, the main function of the shower room is to realize the separation of dry and wet in the bathroom, generally speaking, the height of the shower room is up to meters, and the moisture partition can be basically realized, and there is no need to do the capping treatment.

    Of course, everyone's aesthetics and needs are different.

    If you like the capping design, as long as you do a good job of exhaust ventilation, there is no problem

  2. Anonymous users2024-02-11

    The person who caps the shower room will feel particularly stuffy and dangerous, and the person who does not cap the heat will not feel stuffy.

  3. Anonymous users2024-02-10

    The reason why the shower room is not capped is revealed

    People who have installed shower rooms at home will generally find that the shower rooms on the market will not be designed to be capped, whether they are slotted, diamond-shaped, or arc-shaped. Why is it designed this way? Let's talk to you.

    First of all, the shower room is a completely sealed space, and the water vapor generated during the shower cannot be dissipated, and it is easy to form a "high-concentration steam macroband" shower space, which will cause adverse reactions such as chest tightness and poor breathing for a long time in such an environment.

    The uncapped design allows the water vapour to dissipate slowly rather than gather completely. In this way, it can not only ensure the leakage of warm water vapor in the shower room, so that the heat will not be lost quickly, but also ensure good ventilation, so as to avoid dizziness and difficulty breathing caused by too long bathing time, high temperature and humidity.

    Secondly, the design of the cap not only affects the aesthetics, but also increases the total price. Because of the fully enclosed design, it is necessary to install exhaust fluid equipment to maintain air ventilation and convection. But this will inevitably affect the overall visual effect of the shower room.

    Finally, the important function of the shower room is to realize the partition of the bathroom, generally speaking, the height of the shower room is up to a meter, and the partition can be basically realized, and there is no need to do the capping treatment.

  4. Anonymous users2024-02-09

    Now most people will make a shower room in the bathroom, it not only looks more beautiful, but also can play a role in dry and wet showering.

    Don't make the shower room to the top, first of all, you must know that the top will affect the line of sight of the shower room, and there is no way to dissipate the water vapor in the shower room when taking a bath in winter; If it is installed to the top, it is also more difficult to clean; If the amount of top glass is increased, the cost price will be increased.

    What are the benefits of using the shower room.

    1. Safety.

    The installation of the shower room can play a good role in the separation of dry and wet, it can be said that it is also a relatively obvious advantage, such as the lower closed space and the water retaining strip, which can be a good way to block the flow of water outside, so that the shower process does not leak, and the most important thing is that it can also play an anti-slip effect, so that the elderly at home will slip when they are in use, and the safety is more assured.

    2. Usage.

    If you want to be practical, then it will be more convenient to use the shower room in the bathroom, and at the same time, you should know that the shower room can be said to have a good independent space, so that you can take a bath in the bathroom at will, and it will not be affected by the outside.

    3. Keep the room warm.

    In winter, it will be relatively cold, because the area of the shower room is relatively small, so you can quickly heat up in the shower room when you take a shower, which not only has the effect of saving energy, but also can prevent colds and colds.

    4. Life style.

    The structure of the shower room will be relatively simple, and at the same time it looks simple and transparent, which can be said to be more suitable with various decoration styles, and the most important thing is to better create a minimalist bathroom space, which makes people feel more comfortable.

    Summary: The content of the shower room is introduced here, generally speaking, it is recommended not to do the top, in fact, the benefits of using the shower room are still more. If you want to know more about related knowledge, you can consult Qijia.com.

  5. Anonymous users2024-02-08

    Seeing this title, the average person may think back to their own shower room and realize: Hey! It's true, the installation of the shower room is generally not to the top. Do you know why it's designed this way? Annihilator.

    There is a knowledge point to tell you: the height of the shower partition in the bathroom is 2 meters, which has met the functional role of the partition.

    Why not to the top? There are several reasons to change the base as follows!

    1. Cause high water vapor concentration, which is not good for the human body, and the bath is already relatively stuffy, especially for older people!

    Second, the vision of the bathroom is affected.

    3. No matter what form of door the shower screen chooses, it must be made according to the proportion of the door, and the upper part needs to be fixed with glass transom, which causes chaos in the form of the façade, increases the amount of profiles and glass, and increases the total price.

    4. The glass of the shower screen is fully tempered glass, which is not affected by the temperature (including the temperature difference between inside and outside).

    Fifth, the fully enclosed and frank shower screen needs to install two exhaust fans in the bathroom, which makes the shed more messy and destroys the overall appearance of the shed.

  6. Anonymous users2024-02-07

    In this way, wouldn't it be better to keep warm.

    Come on, come on, hit the point.

    Actually, the reason behind this is very simple.

    If the shower room is capped, it is easy to form during the shower.

    High concentration of water vapor.

    bathing space.

    Being in such an environment for a long time.

    It is easy to produce adverse reactions such as chest tightness and poor breathing.

    Especially the elderly, special attention should be paid to it.

    Actually, install a shower room in the bathroom.

    Mainly fancy its partition function.

    Prevent splashes of water during bathing.

    So as to ensure that the bathroom is clean and tidy.

    In general, the height of the shower room is up to meters.

    Partitions can be basically realized.

    There is no need to do capping.

    Want to create a better partition effect.

    In addition to the height.

    Details such as the glass edges and joints of the shower room.

    It is also necessary to do a good job of sealing.

    in order to better ensure that the water flow does not overflow.

    Achieve true "wet and dry separation".

    The shower room is on the edge of the glass door.

    It is designed with humanized buffered silica NSN magnetic stripe.

    Outstanding water sealing.

    Quiet shower door opening and closing experience.

    Create a more comfortable shower environment.

    What other questions do you have about the shower room.

  7. Anonymous users2024-02-06

    The shower room is not capped to the top, which generally has two effects. Mul.

    1. The aesthetics are insufficient.

    If the shower room is not capped, it will give the impression of an asymmetrical or defective house, and the overall look will not be aesthetically pleasing. At the same time, due to the ventilation, it may feel cold when showering in winter. Mul.

    2. It is conducive to breathing.

    If the shower room reaches the top, it will cause a high concentration of water vapor, which is not good for the human body, and the bath is already relatively stuffy, especially for older people. No matter what form of door you choose for the shower room, you must make it according to the proportion of the door, and the upper part needs to be fixed with glass brighteners, which causes chaos in the form of the façade, increases the amount of profiles and glass, and increases the total price. Therefore, the shower room is not capped to the ceiling, which can reduce costs.

Related questions
3 answers2024-07-13

Top 10 famous brands for your reference.

1 Deli shower room (shower room top ten brands, shower products large-scale production enterprises, Zhongshan Deli sanitary ware). >>>More

5 answers2024-07-13

1. Consider how to open the door. The door opening method is generally divided into external opening, casement opening (sliding left and right), and internal opening. Generally, when the door is opened, it occupies a large space, and the actual area should be considered to be sufficient. >>>More

6 answers2024-07-13

<>1. You can buy some office glass dirt cleaners, these cleaners are specially designed to remove scale in the shower room, glass cleaners are purchased on the market, on the market and online, when we buy glass cleaners, don't forget to buy glass cleaning brushes, with glass cleaning brushes, you can remove limescale in the shower room very well. >>>More

15 answers2024-07-13

The following three points should be paid attention to: 1. In order to ensure the smoothness of the overall shower pulley, lubricant or peanut oil can be added appropriately. 2. When the pulley of the track-type shower room is loose or falling off, it is necessary to find maintenance personnel in time to adjust it to ensure that the pulley is effectively bearing the movable door, and then use a paper towel dipped in peanut oil to clean the foreign matter in the track to ensure smooth sliding; Avoid hitting the movable door too hard to avoid causing the movable door to fall off. >>>More

10 answers2024-07-13

What do I need to pay attention to when installing a shower room? Do a good job in moisture-proof work. It is good to choose two-component energy-saving acrylic coatings for waterproof coatings, which is also the waterproof coating recommended by the Ministry of Housing and Urban-Rural Development at this stage. >>>More