How to design and decorate the partition of the bathroom?

In my opinion, the bathroom partition should be designed in this way, and the decoration can be considered in combination with the bathroom decoration method and the bathroom partition design, and I have the following views:

1. Hard partition wall. Sanitary partition walls can be designed as hard partitions, which are a type of partitions that cannot be moved and have the characteristics of permanent, strong and durable. Common bathroom hard partitions are like sliding doors, which can clearly divide the bathroom space.

However, the hard partition will appear very heavy and rigid, if the partition is not properly arranged, it will directly affect the lighting and ventilation of the bathroom, so the hard partition is not suitable for use in the bathroom of small spaces.

2. Soft partition wall. The soft partition is relative to the hard partition, the partition can be moved at will, and the soft partition has the characteristics of separating the space from top to bottom, such as shower curtains, bead curtains, etc. are soft partitions, the whole will give people a very light and lightweight feeling, and the soft partition can be carried out and put away at will, which is very convenient to use. In addition, the color and pattern of the soft partition are very rich, which can be replaced at will, and the overall decoration is also very strong, which has little impact on the ventilation and lighting of the bathroom space, but it is not obvious for the division of space, so it is suitable for use in small bathrooms.

3. Composite partition wall. Composite partition is a combination of soft and hard partition characteristics, the soft and hard partition into one to design, the common composite partition in life has bead curtain for the screen, hollow window partition with gauze curtain, etc. The composite partition can not only ensure the ventilation and lighting of the bathroom, but also make a clear and clear division of the space, which is very convenient to use and suitable for a variety of spaces in the bathroom.

However, the design and construction of composite partitions are relatively complex, and the overall style and color of the bathroom should be considered comprehensively in the design to ensure that the overall coordination is coordinated.

Fourth, brick partition wall. Brick partition is a kind of non-load-bearing wall partition, which is used more in sanitary partition, and the brick partition wall is low in cost, and the overall effect is also very good, and there is a sense of space. Common brick partitions are made of ordinary clay bricks, hollow bricks, aerated concrete blocks, glass bricks and other blocks, it is worth noting that this kind of brick partition has high requirements for waterproof layer treatment, and it should be paid attention to when moving.

The decoration should be carried out with a strong safety factor, and the overall style should be paid attention to, and some of your favorite embellishments and accessories should be added in the process of decoration.

First of all, it is necessary to measure the size in advance, plan and design in advance, pay attention to the division of functional areas, and do not use partitions that take up too much space. Sometimes it can be replaced with a shower curtain.

The partition of the bathroom should be made of stainless steel and glass, and designed to be frosted, so that the partition will be more beautiful and will not hinder the lighting.

The distance between the toilets should be determined by the assumption of stainless steel and glass, and the distance between the frosted materials should be more elegant, and it should not hinder the lighting.

This kind of shower room is fashionable, but its size is generally fixed, and it is not suitable for non-standard products, and it needs to be equipped with a suitable chassis, soft lines, unique model, and good looks, but it is also more expensive, and the arc shape is a polygonal bathroom partition for families with the elderly. Generally speaking, when making sanitary partitions, it is most reasonable to use a rectangular method, and if there is not enough space, then a curved structure or a polygonal structure may be used. The dryness of the bathroom is guaranteed, but the family gets up early to go to the toilet and washes to avoid the trouble of queuing.

At this time, you can consider the separation of three types and isolate the toilet separately, which can make the use of each functional area more convenient.

<> but the difficulty of realizing the "four-style separation" is relatively large, and it is also the most ideal solution, but in reality, if the "three-type separation" can be realized, it is also a relatively good solution, that is, the handwashing station area, the toilet area, and the bathing area are opaque The advantage is that the privacy is strong, and the installation of opaque partitions in the bathroom can improve the utilization rate of the toilet - for example, an opaque partition between the toilet and the sink can be used at the same time.

Wall partition is a traditional partition method, but wall partition should pay attention to decoration and avoid tacky. The wall partition is generally suitable for a larger bathroom, which is equivalent to dividing the entire bathroom into two and formally dividing it into two rooms. From the perspective of beautifying the indoor environment, the use of glass partitions in the bathroom can bring a transparent visual sense to the whole space, and the bathroom will look more refreshing and concise.

The solid wall partition made of brick will be more flexible in shape.

Shower room partition. Install a shower room directly in the bathroom, you can achieve dry and wet separation, which is very convenient. Similarly, it also has certain requirements for space, and a bathroom that is too small may not be achievable.

Japan's four-style separation is indeed very convenient and practical, but it also does not match the domestic living habits or space! The biggest reason is that our bathrooms may not have that much area.

You can use a glass partition, the glass partition is transparent and clean, so that the bathroom becomes more bright and spacious, improve the grade and aesthetics, and the waterproof performance is more prominent.

If you have a large bathroom space, then you can install a glass door. In this way, dry and wet can be separated.

I think that by separating the toilet from the sink, the partition feels natural, and it can be more convenient and can be used by multiple people at the same time.

Polygonal bathroom partitions. Generally speaking, when making sanitary partitions, it is most reasonable to use a rectangle. If there is not enough space, then a curved or polygonal structure may be used.

Wall partition is a traditional partition method, but the wall partition should be decorated to avoid tacky. Partition walls are generally suitable for larger bathrooms, which is equivalent to dividing the entire bathroom into two rooms. This kind of shower room is more fashionable in comparison, but the size is generally fixed, not suitable for non-standard products, and needs to be equipped with a suitable chassis.

The lines are soft and the shape is unique, so it looks good, but it is also expensive. Curved toilet partitions for homes with elderly people are polygonal. Generally speaking, when making sanitary partitions, it is most reasonable to use a rectangle.

If there is not enough space, then a curved or polygonal structure may be used. The dryness of the bathroom is ***, but the family members who get up early to go to the toilet to wash themselves can't avoid the trouble of queuing. At this time, three types of separation can be considered, and the bathroom can be isolated separately, which can make the use of each functional area more convenient.

The tempered glass partition is very good, and many users are the first choice when decorating the bathroom. Because of the tempered glass partition, it can effectively isolate the dry and wet areas in the bathroom. It does not cause splashes when bathing, and it can also meet the needs of washing and squatting in the toilet at the same time.

When used, they do not affect each other. With tempered glass partitions, the bathroom can look clean overall. Half-wall partitions, whole wall partitions, and then tiles on the walls; Some painted wooden partitions are sometimes used.

But no matter which one it is, it can be seen that these materials have good waterproof performance, which is a problem that must be considered when doing dry and wet partitioning. Shower room partition. The bathroom is directly equipped with a shower room, which separates dry and wet, which is very convenient.

Similarly, it also has certain requirements for space, and a bathroom that is too small may not be able to do it. It has a wide range of applications and is very friendly to small bathrooms. Because transparent and clean glass will not only make the bathroom look cramped and crowded, but also make the bathroom more bright and spacious, and improve the overall grade and aesthetics.

Wall partition is a traditional partition method, but the wall partition should be decorated to avoid tacky. Partition walls are generally suitable for larger bathrooms, which is equivalent to dividing the entire bathroom into two rooms. From the perspective of beautifying the indoor environment, the use of glass partitions in the bathroom can bring a transparent visual sense to the whole space, and the bathroom will appear more refreshing and concise.

Solid wall partitions made of bricks will be more flexible in shape.

You can choose a shower curtain, a semi-partition glass, a full-partition glass, a bath room, or a wall. For me, it will be more practical to build a wall, you can pave the floor tiles when decorating, and then you can also make a few niches, you can put shower gel in the later stage, you can also put shampoo, it will not be moldy, it will not be deformed, it will be more convenient to clean, and it will be lower.

You can choose to design a glass partition between the toilet and the shower, and use a shower curtain and waterproof strips to shield it, which can not only make the space appear open, but also play a good role in the dry and wet isolation of functional partitions; I think this is the best solution, and of course there are other partition designs.

When decorating the bathroom, the partition should choose a curtain or a pole, which is particularly practical.

Glass partition is a more common practice at present, and its advantage is that it can effectively isolate the water vapor in the shower room with good sealing, and it can also prevent heating leakage when taking a bath in cold weather. Moreover, the transparency of the glass itself makes it visually not cramped. If the bathroom area at home is okay, you can also build half a wall in the bathroom to make a partition.

To do this, we need to open a niche in the wall, which is also more convenient for our daily toiletries, and you can also put clothes in it, hang dry towels and other things.

Solid walls are generally suitable for large bathrooms to form independent partitions that are easier to take hygiene, because the glass partition is relatively more complex than the wall. If the bathroom at home does not separate dry and wet, then after each bath, the entire floor and the toilet are splashed, which is more cumbersome to take care of. The partition of the bathroom, in fact, is also a problem that is more commonly faced by renting in the society and today, because in the past, our houses were relatively large, and the area in the bathroom was also relatively large, and we would also separate the shower place from the toilet place.

Glass full partition, which means that it is completely separated from the bathroom, belongs to an independent space, but the premise is that this requires a relatively large bathroom, the general partition material is glass, and the building materials market has corresponding materials, including the pre-service of door-to-door measuring tape. Using a shower curtain as a partition is the most convenient and cheapest way to use it for bathrooms of all shapes. Many bathrooms with dry and wet separation will have partitions to assist in the design, even if some bathrooms do not have dry and wet separation, you can also design a perfect space for dry and wet separation if you use partitions skillfully.

Sanitary partition walls are used in every house, which saves space and is beautiful and generous. There are enough styles to match any effect you want, but it is still difficult to achieve the ultimate effect, and the shape of the glass partition is indeed irreplaceable.

Method: Glass partition was used for the master bedroom bathroom. The choice of glass partition for the master bedroom and the master bedroom bathroom can make all the master bedrooms more and more warm.

The common process of bathroom glass partitions. Before installing glass partitions, the pavement in the bathroom should be covered with floor tiles, and the walls should be paved with wall tiles. It is necessary to install mountain spring water pipelines in glass partitions, do a good job of anti-odor floor drains, and facilitate drainage pipes.

After measuring the specifications of the bathroom, set the specifications of the glass partition, and then do a good job of the decoration partition of the bathroom according to the specific specifications. However, we must pay special attention to the size of the glass door. Assemble the glass partition in the bathroom.

The first thing to do is to drill the eyes on the glass, and the eye-punching should be carried out in front of the glass, otherwise there will be no eye-moving after the glass. The second is to fix the frame to avoid falling during the assembly process. At the same time, it is necessary to evaluate the glass in all directions to avoid damage during the daily application process.

How to decorate the bedroom bathroom, the interior decoration of the master bedroom with bathroom can be decorated in the usual way, and the bathroom is pasted with wall tiles and decorated ceilings; The master bedroom is moderately designed, painted walls, and wooden floors, and the interior decoration of the master bedroom with bathroom is generally or according to my preferences, and the overall design style should look as warm as possible. If the bathroom is small, you can use swing doors (sliding doors) to save indoor space. The door of the inner guard is proposed to be made of titanium or plastic steel profiles, which are not expensive, and the waterproof characteristics are definitely much better than wood.

The bathroom is the special type for the master, which is also a sign of a higher quality of life. Sometimes there is an argument between the whole family (or customers) when they go to the toilet, and this is where it comes in, and practical experience has proved that this function is of practical significance. There are also many community owners who have changed the bedroom bathroom into a storage room, because there are basically no customers at home, and there are few people in their own homes, so it is not easy to produce a situation like the above.

It is not unreasonable and groundless to do so, it is related to the individual's personality and the level of daily life.