Do you think it s better to use the floor to press the wall or the wall to press the floor in the ba

This is my own home, which was handed over to my family for renovation three years ago, and when I came back, I saw the bathroom with the floor pressed against the wall. After three years of use, it's what it looks like now! (I live here relatively little, so I don't bother to fix it.) ）

This is my own home, which was handed over to my family for renovation three years ago, and when I came back, I saw the bathroom with the floor pressed against the wall. After three years of use, it's what it looks like now! (I live here relatively little, so I don't bother to fix it.) ）

Do you think it's my laziness that causes the corners to mold? In fact, it is because of the perennial water here, and it naturally turns yellow after a long time. The biggest flaw of the ground pressure wall is here-

When laying floor tiles, there must be a large gap between the floor tiles and the wall. This gap is not reflected in **, it is actually as wide as a child's finger.

In addition to being unsightly, the biggest problem with the gap is that it is easy to accumulate water. Water on the floor will flow in, and water droplets on the walls will flow downward. Moreover, the stagnant water in this place is difficult to clean up and not easy to dry, and it is really not an exaggeration to say that "there is stagnant water all year round".

After a long time, not only will the gaps turn yellow, but they will slowly extend up along the gaps in the wall tiles - so you can see that the corners of my walls have turned yellow to the wall tiles.

Compared with the construction sequence of wall pressing, the construction of wall pressing is slightly more complicated. That's why some black-hearted workers will try their best to fool the owner into choosing to press the wall - that's how my family was fooled.

The tiles are first pasted with wall tiles and then with floor tiles, because the floor tiles can not be stepped on after pasting, and the floor tiles need to be pasted first and then the wall tiles are dry, delaying the construction period. (Some owners want to put tiles themselves, but the technology is not in place.) At this time, you can paste the floor tile first, and then slowly wait for it to dry thoroughly before pasting the wall tile, and use time to make up for the lack of technology.

When > pasting wall tiles, it is necessary to leave the bottom row without sticking - the difficulty is also here, not only to leave the height of a single wall tile, but also to reserve the height of floor tiles and cement mortar. In particular, the floor of the bathroom has a slope, which may also involve the cutting of the lowest row of wall tiles.

Wait until the floor tiles are pasted, and then paste the last row of wall tiles. The gap between the floor tiles and the wall can naturally be blocked under the wall tiles.

In fact, the bathroom we use this ground pressure wall is still relatively good, such a wall looks particularly high, and very good-looking, characteristic, charming, if it is the kind of strong pressure is not very good, the wall pressure on the ground looks particularly depressing, the space does not look spacious and bright at all.

I think it's better to press the wall to the ground, because it ensures that the water doesn't penetrate into the ground when you take a shower.

It is better to press the wall to the ground, first lay the wall tiles, then leave a gap between the bricks at the bottom of the wall tiles, then lay the floor tiles, and then finish the empty wall tiles. When the wall is compressed, a certain expansion joint should be left between the floor tiles and the wall tiles to prevent the floor tiles from being squeezed and bulging. When taking a bath, due to the existence of gaps, water will seep out of the gaps and flow to the ground of the tiles for a long time, which is easy to produce peculiar smells, resulting in the tile and cement not sticking, resulting in hollowing and falling off.

Even after a long time, the bathroom door will be damaged by the moisture bubbles of the floor tiles, causing peeling and peeling.

In general, toilets are pressed against the floor with walls, which avoids water from the wall tiles and flows directly into the wall tiles and floor tiles. To press the wall, you need to lay the line first, leave a brick at the bottom of the wall, paste the wall bricks first, then paste the floor tiles, and finally stick the bricks at the bottom of the wall.

When pressing the wall one after another, the gap is relatively large because the expansion joints should be reserved between the floor tiles and the wall tiles; After water falls from above, it is easy to seep into the floor tiles along the gaps, and the floor tiles are in a damp state for a long time, which is easy to breed bacteria and produce peculiar smells. After a long period of water, the waterproof layer is blocked and there is nowhere to go, and it is likely to flow to the door, affecting the floor materials of other spaces, or causing the corners of the walls to peel off and the wooden doors to rot. The wall is pressed to the ground, this process is more complicated, because it is necessary to paste the wall tiles first, and finally leave the last layer vacant, and then go to pave the floor tiles, and then fix the last row of tiles attached to the wall after the ground is completely dry, not only there is no hole, but also more durable.

The wall floor pressing process is actually the most standard in the toilet decoration, some workers don't want to make a decision if it is too difficult, so many can choose to simply press the wall, if you want to be more durable, the toilet must choose the wall floor pressing process, the water on the wall is directly drained down the tile, rather than directly into the gap.

The bottom layer is empty, and there is no support underneath. If you are not careful during construction, the tiles on the wall can easily fall off. In addition, during the construction of the wall, the bottom layer also needs to be leveled, otherwise the bottom wall bricks may not be installed, so the construction method of wall bricks pressing floor tiles is more troublesome, and many teachers are unwilling to do this.

It is better to press the ground strongly, the ground of the bathroom has a slope, if the ground presses the wall, the gap between the ground and the wall may enter some water, which is not very good for waterproofing.

wall pressing the ground; The bathroom floor generally has a slope, and the chance of water flowing into the gap is less in terms of the direction of the wall flow. The water flows to a low place, and it is not easy for the wall to leak into the ground.

All good. Because this is just a way to lay bricks, as long as the brick laying master has good skills, there will be no difference in any way.

When decorating the bathroom, the most controversial thing is the way the bricks are laid. Some people think that the wall is good for pressing the ground, and some people think that the ground is good for the wall.

What is the difference between the two, and how do you choose? Today, I'm going to talk to you about this issue.

As the name suggests, the wall pressing floor is the wall brick pressing the floor tile, and the floor tiles are laid first and then the wall tiles are laid during construction;

The ground pressure wall is just the opposite, the floor tiles press the wall tiles, and the wall tiles are laid first and then the floor tiles.

Construction difficulty: the ground pressure wall is better than the wall pressing the ground.

The difficulty of wall pressing is higher than that of ground pressing wall. After all, the ground pressure wall is paved with bricks from the ground, with a focus point, slope and cutting, which is relatively easy and not easy to fall off.

The wall is pressed to the ground and the bricks are paved from the wall, and there is no force point in the air, which is difficult to level; Moreover, it is difficult to cut tiles, and the master who is not in place will slip down in the middle of tiling, and the risk of tile damage is high. This is also an important reason why most masters are reluctant to do wall pressing.

Durability: Wall pressing is better than ground pressing wall.

The wall tiles are prone to vertical "sky-facing joints", and the wall water is easy to flow into the cracks of the floor tiles, which will breed bacteria, erode the waterproof layer and weaken the waterproof effect in the long run.

Although the wall tiles and floor tiles will also leave a gap, this joint is parallel to the ground, and the wall water flows to the ground, and will flow along the slope to the vicinity of the floor drain and then drain away.

Cost: The wall is pressed lower than the ground wall.

As mentioned above, it is difficult to lay bricks in the air with the wall pressed to the ground, and the time cost and labor cost are high, and the construction difficulty of the ground pressure wall is low, and the cost is low, so the cost is also low.

Aesthetics: The wall pressing the ground is better than the ground pressing wall.

The gap between the wall and the tile is small, the integrity is strong, and the beauty is generous; The gap between the ground pressure wall and the sky has been hiding dirt and dirt for a long time, and it really doesn't look beautiful.

Based on the above, the wall pressing the ground has obvious advantages over the ground pressing the wall, that is, the construction cost is higher, if it is not bad money, the bathroom can be the first choice when laying bricks. This does not mean that the ground pressure wall is bad, it can only be said that it depends on personal needs and preferences.

I think it's better to press the wall to the ground; I think there is a clear difference between these two, the pressure is different, the load-bearing is different, the effect is different, the price is different, and the development is different.

I think the wall is better pressed to the ground, which can be better waterproof; Pressing the wall allows water to flow down the wall without having much effect on the tiles, which can cause the wall to become damp.

I think it is better to design a low-pressure wall, which can have a good waterproof effect and prevent the growth of bacteria in the wall joints. The effect of decoration is different, the protection effect of the wall is different, the waterproof effect is different, and the moisture-proof effect is different, which is a relatively big difference.

When laying floor tiles, there will always be a large gap between the floor tiles and the wall. This gap is not reflected in **, in fact, it is as wide as a child's finger. In addition to the unsightly gaps, the biggest problem is that it is very easy to store water.

Water from the floor will flow in, and water droplets from the walls will flow down. At the same time, the water in this place is difficult to remove and it is not very easy to dry, and it is really not an exaggeration to say that "there is water storage for a long time". Over time, not only will the gap turn yellow, but it will continue to stretch up along the gap in the wall bricks - so you can see that my wall base has already yellowed to the wall tiles.

Choose the paving method of the ground pressure wall, the gap at the intersection of the floor tile and the wall tile is longitudinal, and the gap at the corner line is horizontal. As we all know, the most important problem for waterproofing in the bathroom is that the water flows low, which indicates that the longitudinal gap is easier to soak than the horizontal one. No matter how much we do in the early days of waterproof engineering, no matter how much the floor tile paving processing technology is, in the natural environment of the bathroom, the water will also seep into the bottom of the floor tiles along the gaps, and in the long run, the water can not evaporate under the floor tiles, and gradually become alcoholic, and a pungent fishy odor will occur.

The selection of the wall and floor paving method can greatly reduce the amount of water infiltration.

Wall tiles pressed floor tiles: The water dripping from the wall immediately flows into the glaze layer of the floor tiles, and because the floor tiles will not be flat, it must establish an inclination to the deodorant floor drain, so this water is not easy to deposit, and eventually flows into the deodorant floor drain. In fact, these practices have always existed to show that they all have their own advantages, and there will be no saying which one is better than which, must choose the wall to press the ground, in other words, the ground pressure wall, which is different from the bathroom to do waterproofing must be done before the tile is done, for the final how to paste or need to see the love of the community owners to determine.

I have seen many decoration companies are basically the practice of pressing the wall, but the owners of the community do not like it very much, of course, it is changed to the ground pressing the wall, sometimes they decorate the master before pasting the tiles and ask the owners of the community which method they like, the master will paste according to which method, everything is decided by the customer. Relatively speaking, it is much simpler to choose the ground pressure wall, first pave the wall tiles and then pave the wooden floor, even if it is to catch water on all sides, it can also deal with the gap between the wall tiles, and it is not that our decoration master deceives the owners of the community for better convenienceIt is true that the actual effect of the two methods is basically the same, and the key is to look at the individual's technicality.

The wall is better pressed to the ground, which looks more beautiful and more durable. The difference between the two lies in the visual experience, the beauty presented to people.

It will be better to press the wall in the bathroom, and the difference I mean is whether to stick the bricks on the wall first, or the difference between the bricks on the ground first.

It is better to press the floor with a wall in the bathroom; The difference between the two is that the installation position is different, the practicability is different, the overall appearance is different, if the ground is pressed against the wall, the water surface will penetrate into the ground, which is not easy to take care of, and it is easy to cause the room to be damp and leak.

Bathroom tiles should be pressed on the wall or on the ground, which has been controversial, because these practices have been used so far, I think the first release of the wall is the decoration company, the elements are the ground pressure wall early in the morning, the decoration company in order to reflect the advantages, the release of the wall pressure method to smoke customers, to the present day for the standardization of the basic requirements of the decoration company are all wall pressing, and some small decoration companies and self-installation are almost all to the wall to do. Wall tiles pressed floor tiles: The water dripping from the wall immediately flows into the glaze layer of the floor tiles, and because the floor tiles will not be flat, they must establish an inclination to the deodorant floor drain, so this water is not easy to deposit, <>

In the end, it all flows into the anti-odor floor drain, scientifically only need to do a good job of moisture-proof, the construction technology is qualified, no matter which method, there will be no water seepage. From the perspective of thermal expansion and contraction, and the flatness of the wall at the specific construction site, the pavement is paved with the wall to leave a telescopic gap, and it is unlikely to be close to the wall to paste tiles. Therefore, doing a good job of moisture prevention is the first step.

In terms of substantive definition, the wall bricks are pressed in the process of operation, not from the bottom of the brick gradually paved, but from the second gradually, but after all the floor tiles are paved, the bottom wall bricks are pasted, so that the floor tiles can be pressed just right. On the other hand, the floor tile pressing the wall means that the wall tiles are gradually pasted from the bottom, and then the floor tiles are pasted after the wall is pasted. <>

If it is a ground pressure wall, it is because the deformation joint of the floor tile and the wall tile should be vacated between the floor tiles, so the gap is very large; Water falling from above is very easy to seep into the floor tiles along the gap, and the floor tiles are damp and cold for a long time, which is very easy to breed bacteria and cause odors. The water accumulates in the bottom for a long time, and there is a lot of water, and there is a waterproof ground that blocks homelessness, and it is very likely to flow to the door of the house, endangering the floor material in other areas, or causing the wall foot to peel, and the solid wood door to rot and deteriorate. Therefore, in the case of pasting the wall tiles of the bathroom, it is recommended to gradually paste the bricks from the bottom to the top, and at the same time, the bottom floor tiles should be supported by the corresponding protective layer cushion blocks.

Then put wall tiles on the top step by step.

Personally, it is recommended that the wall tiles in the toilet do not have to be capped at one time. It is necessary to use the method of layer-by-layer pasting to carry out tiling. Until the wall tiles in the toilet have completely achieved compressive strength, finally the floor tiles at the bottom of the wall tiles in the toilet are repaired.

At this time, two methods can be used in the process of laying this aspect of the floor tiles: the first is to immediately reach the inside of the wall and make the wall to press the floor. The second is to immediately hit the wall tiles in the bathroom to make a floor pressure wall.

Personally, it is recommended that the wall is pressed to the ground, and the bathroom floor generally has an inclination, and the probability of flowing water into the gap is smaller in terms of the direction of the water flow of the wall. Water flows to a low place, the wall is not easy to leak to the ground, the low voltage wall gap is degummed, the heat rises and shrinks, and it is easier to stay under the floor tiles, resulting in water storage.