Is the bathroom tiled or walled? What s the difference?

Personally, I think it should be the wall pressed to the ground, when the wall tiles are pasted, the horizontal line of the ground is popped out, a certain size is reserved on the wall, and then the wall tiles are pressed on the floor tiles for decoration, so that the waterproof effect will be better, and it is more cost-saving, the construction difficulty is relatively small, the water flow flows from the wall tiles to the ground joint, and then enters the floor drain, which can achieve a good waterproofing.

The wall should be selected to press the ground, the construction difficulty is different, there are different decoration costs, the waterproof effect is different, the waterproof effect of the wall is better, and the leakage of water droplets can be avoided.

Tiled floor-pressed walls should be chosen. The difference is that the former is very convenient and looks good, or it is just too difficult to install and time-consuming.

For example, wet paving, dry paving, adhesive paving, and for example, using tile adhesive, tile adhesive, cement mortar, and then for example, orthogonal paving, each kind of tile paving has its own characteristics, and different families have different choices. The construction method of wall pressing the ground, first requires us to paste the wall tiles first, and the wall tiles need to be pasted from the bottom to the top from the second row (the bottom should reserve a certain position), and after the wall tiles are paved, then the floor tiles are paved from the side close to the wall, and then a piece of cut tile is embedded at the bottom of the wall.

When the bathroom is renovated, it needs to be tiled. What is the difference between tiled and wall-pressed? PChouse will take you to find out.

It is recommended that the wall tiles and floor tiles are better for the bathroom tiles, and the main reasons are:

First, if the wall tiles are pressed on the floor tiles, they should not be pasted from the bottom of the wall tile, but from the penultimate wall brick to the top, and then the bottom row of the tiles will be pasted after the tiles are paved, and it will just be pressed on the floor tiles. Wall tiles and floor tiles will be more complicated. If it is a floor tile pressing wall tile, the construction is to start from the bottom of the wall tile, and then spread it along the wall, and then lay the floor tile.

Second, the decoration of the bathroom will generally do two waterproofing, the first time to prevent the sinking part of the water, the second time to prevent the ground water, and the wall of the wardrobe to do waterproofing, the rest of the walls to do 4o to 5o cm high waterproof is enough. The waterproofing of the bathroom is an independent waterproof layer, which has nothing to do with the wall and floor tiles.

Third, there will be a gap between the wall tiles and the floor tiles, if there is water flowing down the wall, it may flow down the gap to the waterproof layer, which will be very troublesome for a long time. The bathroom is a very damp place, it is best not to use floor tiles to press the wall tiles, which is more beautiful from the visual effect, and the bottom tile is not easy to produce hollows. However, the gap between the floor tiles and the wall tiles will be relatively large, and the waterproof effect is not too good.

Fourth, the floor tiles are not directly on the wall tiles, and the tiles will not be squeezed in the whole process of thermal expansion and contraction. And the wall tiles are not easy to see the edge of the gap, we all know that the corners are the most difficult to take care of, so it will not affect the overall appearance.

As we all know, the most important thing in decorating the bathroom is to do a good job of waterproofing, and we must pay attention to the decoration of the wall burning code. Because the bathroom is an area with a high moisture content in the whole home, if the leather cover is not paid attention to, it will have a great impact on the wall. So, is it better to press the wall or the wall to press the wall in the bathroom?

What do you need to pay attention to when tiling in the bathroom? Let's find out together.

It is best to choose the wall to press the ground for bathroom tiling, because the bathroom is a place that needs to be separated clearly from dry and wet, and its waterproofness must be taken into account in the decoration process. Usually the wall of the bathroom is relatively easy to have water, and the water will flow down the wall, if you choose the wall to press the floor, then the water will naturally flow to the floor tiles, and finally drain into the floor drain. However, if you choose to press the wall, this water will seep into the gaps in the edges of the tiles in the corners.

Precautions for tiling in the bathroom.

1. Seam problem.

When tiling the bathroom, the gap left should not be too small. Because if the gap is too small, the tile will cause the glaze to crack when it is hot and stuffy, which is easy to reduce the service life of the tile.

2. Caulking problem.

There are many construction workers who will hook the bathroom tiles immediately after they are paved, but in fact, this treatment is very wrong. Because the tiles are not completely dry at this time, if the joints are immediately hooked, it is easy to cause the loosening of the tiles, and the phenomenon of falling off will be caused in the later stage, leaving potential safety hazards.

3. Make a plan for arranging bricks before paving.

The bathroom should do a good job of brick arrangement plan before paving, because some construction personnel will start to pave as soon as they get the bricks, and when they are paved to a certain extent, they will find that the effect of brick arrangement is very bad, the proportion is not coordinated, and they must be removed and re-paved.

Article summary: The above is about the bathroom tiling is better to press the wall or the wall is better and what needs to be paid attention to in the bathroom tiling, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

When tiling tiles, different areas are paved in different ways, especially the bathroom tile paving is to pay attention to, not sloppy at all. So is it better to press the bathroom tile wall or the floor wall? What are the precautions for bathroom tile paving?

It is best to use the wall to press the ground for paving, which is not only beautiful and beautiful, but also avoids the water on the wall tile from flowing directly into the joint between the wall tile and the floor tile, resulting in the phenomenon of tile bulging.

What are the precautions for tile paving in the bathroom:

1. It is best to supervise on site during construction, so that workers do not dare to waste tiles too much, and can suggest that workers paste imperfect tiles in places that cannot be seen, such as: cabinets, washbasins, mirrors, etc.

2. Before tiling, the wall should be made as rough as possible, so as to increase the contact force between the cement and the wall.

3. Be sure to pull the line when pasting the bricks, and use a level, no matter how good the bricklayer's craftsmanship is and how good it feels, it is still necessary to use tools to control the quality.

4. The load-bearing wall can be coated with cement mortar, but 108 glue must be added to the cement mortar when tiling the wall of the kitchen flue and bathroom air duct to increase the viscosity.

5. When tiling, workers will hold a ruler with a large core board for inspection and acceptance, in fact, the use effect is not good, so it is best to use a level or aluminum alloy for ruler inspection.

6, in the inspection of the tile drum can not just paste on the knock, but to wait patiently for two or three hours before knocking, in the inspection, the four corners of the tile to knock one by one, hear the drum must be reworked, do not be soft-hearted, so as not to affect the later use.

7. The floor of the bathroom should have a certain slope to flow to the leakage. In addition, when decorating toilet pipes, try to avoid changing the original location of drainage and sewage pipes and floor drains to avoid damage to the waterproof layer and cause leakage.

Article summary: Well, about the Yuhe Town bathroom tile wall or ground pressure wall is good and what are the precautions for bathroom tile paving, what are the relevant knowledge of Qing Rough is introduced here, friends who need more information, please continue to pay attention to Qijia.com, and we will have better and more exciting content for you in the future.