What should I do if the bathroom floor is empty? What to do if the bathroom tiles are empty

1. The tiles are completely loose!

In this case, the treatment method is relatively simple, first take out the bulging tile carefully, and then clean up the dust and impurities on the back of the tile and the base part of the ground, and use a special tile adhesive to paste. Because it is a floor tile, there will be certain requirements for its compressive resistance, and the tile adhesive on the back of the tile can be evenly applied to the back of the tile when pasting, so as to avoid the hollowing of the tile as much as possible. (Of course, the best way to deal with it is to use cement mortar paste.)

2. The tiles are not completely loose!

The difficulty of dealing with this problem lies in the fact that when taking out the tiles, it may cause damage to the tiles, which may involve the replacement of damaged tiles, if you do not keep the spare tiles, then you have to implement whether you can find the same color number (the same model of products, if not the same batch of production, its color may be different) products, and re-fill some tiles of the same color. The tile is smashed open from the middle, use a crowbar, carefully pry the damaged tile from the middle to the periphery, so that the treatment will not cause damage to the surrounding tiles, after the tile is taken out, and then dispose of it in accordance with the method in the first article above.

This is that the tiles were not pasted well, so if they are empty, they have to be removed from the new bricks, so that they will not be empty again, so you can find a master with good skills.

Many families will lay tiles in the bathroom, and after using them for a period of time, they will find that there will be some cracks on the tiles, and there may be hollowing problems. If it is laid on the ground, it may not be a big problem, and if it is placed on the wall, the tiles are likely to fall off, which is very dangerous. What should I do if I have such a problem at home?

I'm going to introduce it to you today.

First, what to do if the tiles are hollow.

1. The tiles in the bathroom have the problem of hollowing, and we need to remove the tiles. Of course, when dismantling, you need to disassemble the mortar above, and then do a brushing treatment on the wall or ground, and then mix the cement mortar according to the correct ratio to ensure the adhesion of the mortar, and then the tile is compacted and pasted, and it can be accompanied by fixing, or we can also use tile adhesive, its effect is also very ideal, and it is not easy to fall off in the later stage.

2. Sometimes it may be that the water consumption of the bathroom cover is relatively large, resulting in high humidity, or the problem of water leakage in the waterproof layer, at this time, the tiles may also be empty, in this case, we need to do the waterproof layer of the bathroom again, and then lay tiles in the bathroom, which can solve the problem once and for all.

Second, how to prevent the problem of empty bathroom tiles.

1. The choice of ceramic tiles is also very important, we must choose the quality of the tile, look at the water absorption rate of the tile, if the water absorption rate of the tile does not meet the requirements, the problem of thermal expansion and contraction in the later stage is easy to crack, there will be a hollow situation.

2. In addition, we also need to do a little treatment on the wall, first of all, we need to scrape a layer of putty on the wall, and then we need to do a brushing to clean up the wall.

3. If you choose cement mortar as the cohesive force, you must choose cement in accordance with the relevant standards, and the strength must meet the requirements.

The above content is about what to do if the bathroom tiles are empty, and what are the good ways to prevent it.

Many people think that the floor tiles are finished and basically fine, but everyone will find that even after our tiles are successfully completed, there will be a lot of problems. For example,The bathroom tiles are empty, which means that there is a gap between the tile and the cement under the floor tile. So,The bathroom tiles are emptyTo be repaired, to understandThe bathroom tiles are emptyCauses.

1. First sift a little yellow sand with a sieve.

2. Use a cutter to make an incision around the empty brick.

3. Mix the sieved sand with cement until a fine paste is obtained.

4. Pour a thin mortar along the sides of the joints and tap the floor tiles to fill the space under the floor tiles.

5. Deal with the gap after two days. It is recommended that you do not have to repair it in a hurry, if the impact is aesthetic, you can remove this floor tile and install a new one.

1. The construction process. Wet tiles are simple and will be empty. In a humid space, due to the high moisture in the cement mortar, during the natural paving process, the water penetrates into the lower layer, and after drilling, a large and small vacuum area is formed, while the tile is not fully connected to the floor and the lower layer, and presents a hollow.

2. Construction skills. Tile placement is a common construction method in decoration construction, and the requirements for workers' skills are very high. Due to improper operation and other destructive factors, unskilled workers in the construction process will also constitute hollowing.

3. Cut corners. In order to save time and materials, the general renovation team usually only places the sand and ash of the fiber booth in the corner of the tile, and then places the tile. It's just that the four corners are fixed, so the tile looks very solid, but there is no sand ash in the center of the tile.

Due to different circumstances, the problem of empty underneath will be formed.

4. Environmental and seasonal reasons. Due to the change of seasons, the tiles are not completely dry after paving and closing. If there is a sudden drop in temperature, the moisture in the mortar will not dry completely.

When the temperature rises, the tiles and the lower layer will be empty due to expansion and thermal contraction, and then a hollow drum will be formed.

Here's what we've introducedThe bathroom tiles are empty

You can get it for free

Why is it hollow and how to deal with tile hollowing? Let me get to the previous question! Nowadays, many bricklayers are using the dry paving method (that is, semi-dry cement mortar as the base, and plain cement or tile adhesive is used before drying), and there are many reasons for hollowing.

Cement ash is insufficient, not full and uneven; The cement label is not enough, and the old wall is not sprinkled; The seam is too small; Stepping on the tiles before they dry will cause them to loosen and cause hollowing; There is a waterproof layer on the wall, but there is no tile glue or brushing treatment; The porcelain tiles are soaked in water for insufficient time, but the water absorption is not sufficient; Floor tiles on the wall without tile glue or hanging copper wires, etc., may lead to hollowing.

<> the floor tiles in your house are also hollowing, right? When you decorate your home, whether you are looking for a decoration company to decorate or a construction team to decorate, if you are looking for a decoration company, it is best to find their customer service to deal with this matter. Theoretically, they should have arranged for a master to handle it.

The hollow drum is caused by the presence of air in the original masonry and the powder layer, when detecting, the hollow drum hammer or hard object taps the plastering layer and the leveling layer to make a knocking sound for the hollow drum The "hollow drum" in the quality of the house generally refers to the hollowing phenomenon between the ground, wall, ceiling decoration layer (plastering or pasting surface bricks) and the structural layer (concrete or brick wall) due to pasting and combination, commonly known as "two layers of skin".

The common way to repair the hollow drum is to shovel the sand ash, refill it with quick ash, and re-batch the putty after drying. However, some hollow drums, due to the location and other reasons, it is difficult to chisel out, such as the hollow drum between the concrete protective layer and the base layer is more difficult, some more expensive stones, the hollow drum between the ceramic tile and the base layer, and the stone damage economic loss is greater after chiseling. This type of hollowing can be solved by the method of perfusion repair.

The AB resin grouting repair of some engineering crack treatment centers can inject high-strength adhesive into the hollow drum, and the empty position can be filled with full adhesion and compression resistance.

This kind of grouting repair hollow drum method time is fast, does not damage the base, by its underground garage, plant and other sites, the construction process does not affect the use of the owner, is a more convenient way. Of course, the hollow tiles are important, especially if the tiles on the ground are hollow, the slightly heavier people or items are easy to break on the hollow tiles. Therefore, if there is a large area of hollow drums, it must be dealt with in time, and it must not be delayed.

The reason why the bathroom floor tiles are empty is that the cement mortar is not wet with water before it is paved, so after the cement mortar is paved, the water is absorbed, and there will be a hollowing phenomenon.

I really don't know, I haven't understood, and many people have big questions about this issue.

I really don't know, I haven't understood, and many people have big questions about this issue.

Usually there are two reasons for knowing spring: 1The backfill is not compacted or the backfill is not undisturbed or similar to the undisturbed soil.

2.Groundwater fell sharply. 3.

Find out if there is circulating water nearby, or leaking walls and toilet pipes, and it is best to do waterproofing of the outer wall of the toilet.

The first reason can be solved upstairs.

The second reason is that you can't do groundwater, so you can only backfill it according to the first method. However, it is necessary to pay attention to the backfill tamping to ensure that the water content of the backfill is similar to that of the original soil, and then make the base surface.

The third reason, I guess you can't get it, the amount of work is too large, not cost-effective.