The carton printing machine prints a minimum of 1 mm of words, and needs to be clear, what to do, an

To disappoint you: no matter how rich your printing experience and how skilled your operation is, the general carton printing machine will not be able to print 1 mm words clearly, especially Chinese characters.

If you want to clearly print 1 mm square characters (Chinese characters) or even smaller, then you have to buy a printing machine, of course, when you order the equipment, you have to make the request to the equipment manufacturer, what effect is required.

Of course, with the equipment that can print small prints, it is also necessary to have the right ink (water-based ink is generally used for carton printing), matching printing plates, cardboard and related operating technologies, and these equipment should provide technical guidance. Because it involves mechanical manufacturing technology, I won't talk about it! You can refer to Haoyun's HYY-H carton printing machine and its **.

It depends on what kind of version you're using, normally you have to use a resin version!

It also depends on how your printing machine is, whether the precision is high or not, if the machine is a good machine, it is a problem to debug the machine. The main reason is that the pressure of the inking roller can not be large, and the pressure of the hanging roller cannot be large.

Then you use high-grade ink! The most important thing is to add water to lighten the ink! Don't get too strong. Thank you!

The minimum cannot be less than BAY4. But the actual DU printing is not as small as zhi, and generally the minimum number 4 and above and the number 6 are relatively small. Small answers can not be printed in four colors, it will be easy to be inaccurate.

AI, ID, PS, CDR should be the font in the computer, in principle, it can be used, pay attention to try not to use too unpopular fonts.

The strokes of the Song style are horizontal and thick.

The strokes of the imitation Song style are relatively thin horizontally and vertically.

The shape of the italic stroke retains the characteristics of the brush; Horizontal and vertical, skimming points have pen edges.

The black strokes are thicker both horizontally and vertically.

Generally, A4 paper should be no less than the font size of "small four"!

The smallest should not be less than 12-11pt

12pt font is best not too thin or too coarse.

There are not many font requirements, and they can basically be used.

Just looking at it is not enough to learn, after all, it is mechanical equipment, and it is not a simple look at it to become a teacher.

Although the X9 high-speed inkjet printer operation interface is relatively simple, but the printing of inkjet coding is mostly patterned square words are basically printed out of the form of the system, how much to understand PS AI and other processing software, otherwise the printing of ** text effect is difficult to predict.

Different printing effects between different DPIs.

Carton printing machine, just look at no one to call, can you learn? Carton printing laser no one, if there is a certain designation of instructions no one can also learn.

If you have time, I can take an hour or two in the evening, and I'll teach you how easy it is.

Inner diameter reverse manufacturing size, a flute: length + 6, width + 4, height + 10;

B: Length +5, Width +3, Height +8;

Cleng: length +6, width +4, height +9;

AB flute: length +8, width +6, height +15;

BC flute: length +8, width +6, height +12;

When you do it, just set it to the actual size and take a look, and you can find an acquaintance to take a look.

Dizzy, these don't need to open a printing press, you don't understand machinery, open a store to advertise, engage in popularity, find a single to print for others, you buy your own equipment and don't understand, that's not to find your own bad luck, printing is very complicated.

You can buy equipment without opening a store, run the business first, and then consider opening a store when the business volume comes up, and then consider opening a store, and if you have business in the early stage, you will process it for your peers and make the difference, so as to avoid opening the store, but there is no business.

The two-color phase is not aligned, just adjust the phase. If not there are several other reasons to check it out:1It could also be a misalignment of the plate. 2.The equipment is aging and the gap is too large; 3.The printing pressure is too strong, and the paper plate is crushed.

I don't know what kind of printing plate you are, what printing machine, I can't go into details.

How did you solve it later, we also have this kind of problem now.