The wall is latex paint, and if you want to paste wallpaper, what should you do?

When pasting wallpaper on a latex painted wall, it depends on the wallpaper material you choose. If the wallpaper is plain paper, remove the wall paint from the sticker, reapply putty, and level it before pasting. If the texture of the paper is something else, just level the walls and clean them.

Walls that have been painted with latex paint cannot be wallpapered directly. If you want to paste the wallpaper, you need to treat the wall first, scrape the wall with latex paint, polish it flat, and then ask a professional to paste the wallpaper. Sticking wallpaper requires professional glue, and wallpaper is not easy to paste and flat, so you can't paste it yourself.

Second, if you don't like the current color, you can paint a new color layer, but one problem is that the original wall color as the background color may affect the color of the new color. If you brush yourself, it's easy to brush unevenly, and the different depths of the new color may affect the final result.

It is advisable to ask workers to handle the walls and paste wallpaper, or to ask workers to apply latex paint. In fact, I personally advise you not to change in a hurry. When the color of the wall comes out, it is normal to be dissatisfied.

After the furniture is placed, the space is full, and the influence of wall color is not obvious. The dirt on the wall must be removed first, and if there are cracks in the wall, they must be filled with plaster powder first. When brushing the base film, first judge whether the wall conditions are suitable.

You can do a simple experiment: stick it firmly to the worst part of the wall with wide tape, then quickly peel off the tape for 1 minute to see if the latex paint is brought out by the tape. If so, you can't brush it for the time being.

Wait until the walls are completely dry. Of course, if it's just a slight dust, you can brush it.

The latex paint wall is not easy to absorb glue, and the adhesion is greatly reduced. Therefore, it is best to brush the basement film after polishing, especially old walls. Cut out the wallpaper.

The dimensions of the wallpaper must be accurate. Carefully measure the length, width, and height of the wall. We would like to remind you that this step is the most important in the process of pasting wallpaper on latex painted walls.

We have to make sure that the flowers are the same shape and size between the wallpapers. Paste wallpaper. After the wallpaper is trimmed, it should be pasted from the corner of the wall.

At the same time, hang the paper with a scraper, squeeze out the excess glue, and stick it more firmly to the wallpaper. If the glue sticks to the pattern of the wallpaper, you can dry it with a sponge. Cheap varnish does not replace the base film, not only is it more polluting, but it is also less effective.

It is better to choose a material that is easy to replace the wallpaper so that it can be replaced in the future.

Walls that have been sprayed with latex paint cannot be wallpapered directly. If you want to paste wallpaper, you need to deal with the wall first, scrape off the wall surface of the latex paint and polish it flat, and then ask a professional worker to paste the wallpaper.

You can apply a layer of base film to the surface, and then this will protect the latex paint, and brush the wall with a layer of wallpaper glue.

You can first sand the latex paint on the wall with fine sandpaper, then clean it before applying the wallpaper.

Abstract 1. Under normal circumstances, latex paint cannot be directly painted on the wallpaper. Because the surface of the wallpaper generally has small holes, if the latex paint is directly brushed on the wallpaper, the latex paint is generally difficult to adhere to the surface of the wallpaper, and it will be easy for the latex paint to fall off, and some even appear that the latex paint penetrates into the wallpaper, so that the purpose of renovating the wall cannot be realized.

How to treat wallpapered walls to apply latex paint.

1. Under normal circumstances, it is not possible to directly brush latex paint on the wallpaper. Because the surface of the wallpaper generally has small holes, if the latex paint is directly brushed on the wallpaper, the latex paint is generally difficult to adhere to the surface of the wallpaper, and it will be easy for the latex paint to fall off, and some even appear that the latex paint penetrates into the wallpaper, so that the purpose of renovating the wall cannot be realized.

2. If the user is sure that there is no mold, cracking, alkali return and other phenomena in the wallpaper, he can also choose to brush latex paint directly on the wallpaper, but the decorative effect of the latex paint is generally not good, and the service life is generally not long.

3. Under normal circumstances, when the wall is peeling, cracking, etc., or when the wall has been pasted with wallpaper, it is generally not possible to directly paint latex paint. If you want to paint latex paint on the wall, you should first tear off the wallpaper, and you should use tools to remove the wall so that the wall can be kept free of floating soil and flat. 4. Next, the putty scraping should be carried out on the wall, and the putty leveling should generally be carried out twice.

When the putty is completely dry, you should also use fine sandpaper to smooth the putty. If the surface of the wall is painted with latex paint, and the strength of the wall base is also relatively good, then the wall can be directly painted with latex paint after a simple hairing repair.

You can paste wallpaper directly. Because after brushing latex, the wall surface is smoother and no cracks, which is more suitable for wallpaper.

If there is no quality problem and color problem, you can polish the original latex paint wall, be sure to use fine sandpaper when sanding, and after sanding, it must be cleaned. You can use a hair dryer or some other dry rag to wipe the wall clean before you can apply the wallpaper.

In fact, this is also possible, but relatively speaking, it is still more wasteful, after all, the current labor is still relatively expensive, you can consider it yourself.

The home decoration wall was painted with latex paint, and now I want to paste wallpaper again, I don't know if it is feasible or not. So, today we will introduce whether the wall that has been painted with latex paint can be wallpapered? What is the method of wallpapering? Hope it helps.

1. Can the wall of latex paint be wallpapered?

1. The painted wall can be directly pasted with wallpaper without shoveling. The wall is made of latex paint, which itself has higher requirements than wallpaper, and small cracks and cracks must be scraped and polished with putty. The wallpaper wall does not have such high requirements when doing the base treatment, because the wallpaper has a certain elasticity and the judgment mountain wallpaper has a texture pattern, even if the wall base is a little problematic.

Therefore, there is no problem with the wallpaper on the wall of latex paint, plus the latex paint itself has the functions of moisture-proof, mildew-proof, and brush-resistant, so you don't have to worry about what bad effects latex paint will have on the wallpaper after pasting the wallpaper.

2. The latex paint wall can be pasted with wallpaper, but there are still certain requirements for the old wall: first check the wall, and use putty to flatten the light for wall defects or large cracks; There should be no nails, oil stains, dust and other debris stains on the wall, and the wall should be thoroughly cleaned to avoid blistering the wallpaper in the future. To paste wallpaper on the latex paint wall, you need to brush a layer of base film on the wall during operation to increase the adhesion of the wallpaper, and play a role in preventing mildew and moisture and prolonging the life of the wallpaper.

After a few years, if you want to change the wallpaper, you can easily remove it without damaging the wall.

Second, the method of pasting wallpaper.

1. Base treatment: Before sticking, the dirt and dust on the surface of the substrate or base should be removed, and the pan alkali part should be neutralized and cleaned with 9% dilute acetic acid. There should be no flying thorns, pittings, sand particles and cracks on the base layer, and the yin and yang angles should be straight.

The surface is flat, and the hair is beaten before sticking. After the base layer is cleaned, putty is played on the base layer, and sandpaper is sanded after drying.

2. Use environmentally friendly varnish solution as the primer to paint the surface of the base layer.

3. Fold elastic line: first of all, the indoor front should be arranged according to the wallpaper format in the indoor dead corner, the yang corner should be wrapped, and the yin corner should be lapped, and the vertical line should be bounced according to the tile plan, and the number is indicated, as the baseline of the paste.

4. Paper-cutting: According to the size of the wall frame, cut the paper according to the requirements of the wallpaper pattern parquet, compile the corresponding number, and reserve 30---50mm She quantity at both ends to cut, and lay it flat for later use.

5. Brush adhesive: first wipe the workbench, put the back of the cut wallpaper upward, evenly brush with a large flat brush or roller, and press the upper part of the three digs, the lower part of the two-thirds, the glue surface is folded into a tube for posting. (The back of the wall cloth and wall felt should not be glued to avoid contaminating the front.)

Glue only the walls).

6. Sticking: Fold the upper part of the wallpaper after brushing, stick it on the wall, stick it vertically (horizontally) on the wall (ceiling) along the baseline, scrape it flat with a plastic scraper or brush, drive out the bubbles and the adhesive of Duoshe, wipe the wallpaper seam with a clean towel, and then cut off the upper and lower parts with a wallpaper knife.

1. Wallpaper can be directly pasted on the wall of latex paint.

2. Now there is a wallpaper interface agent on the market, as long as you use it, you don't need to carry out complex wall treatment. The wallpaper interface agent can make the surface of the base layer rough, make it easier to stick the wallpaper, and can also avoid problems such as blistering.

3. Remember to make a layer of base film when you brush the latex paint wall wallpaper, which can make the wall moisture-proof, so that the wallpaper is not easy to be damaged and more durable.

If the wall paint has peeling, wrapping and other situations, of course, it is necessary to solve the wall, and then roll the wallpaper base film, pay attention to the roll paint wall solid, do not roll the general wall solid, to brush the infiltration type wall solid, otherwise there is a high probability of problems in the middle and later stages. If the wall paint is relatively new, there are no other problems such as wrapping and peeling, you only need to lightly polish and polish, brush off the dust, and brush the infiltrated wall solid to paste the wallpaper.

It is actually very easy to change the latex paint wall to wallpaper. If there is leakage and mildew in the wall, the water seepage should be solved before proceeding with the next work. If the bottom wall has a hollow wall and peeling condition.

It should be removed first, painted with wall solid, and then batch of putty ash, and then polished and polished after drying. After drying, you can apply wallpaper.

If the wall paint wall is very good, you only need to polish it lightly, brush off the dust and brush the wall, and then you can paste the wallpaper after drying. Before pasting wallpaper, the wall should be brushed with a base film, and a permeable wall should be selected, which is specially designed for latex paint walls, which can penetrate the putty layer to reach the wall, stabilize the solidity between the putty layer and the wall, brush it several times back and forth, and then wait for the wall to dry thoroughly. If possible, you can brush the wall foundation again, and its purpose is to produce a strong protective film on the wall surface of the wall paint, which is conducive to the flatness and solidity of the wall.

After the wall decoration can be pasted wallpaper, to buy a better glue, more conducive to environmental protection and strengthen the adhesion, paving to be careful, do not appear bubbles, seams and edges to be leveled, to maintain a beautiful and generous latex paint wall can be directly pasted wallpaper wallcovering, convenient and convenient, but the complications are also very large, at any time may occur wallpaper cracking, blistering, falling down and other problems, this key is no one can predict, so if there are conditions, it is recommended to shovel off the wall paint, Re-leveling the ground and then pasting the wallpaper, which is both beautiful and safe, and the application will be more secure. Regarding the wallpaper on the latex paint wall, I personally think it is okay

No, in general, it is necessary to brush the glue, and the wall needs to be leveled, so that the wallpaper can be better pasted.

Can latex paint be wallpapered? What is the wallpaper process? It is recommended to shovel off the latex paint first, level it with putty, brush a layer of base film on the wall, and then paste the wallpaper, so that the adhesion ability of the wallpaper will be relatively strong, and it can also effectively prevent the wall from being too wet and mildew, which can prolong the service life of the wallpaper.

1. The wall surface of latex paint can be directly pasted with wallpaper.

2. But it is not firm, if you want to paste wallpaper, you must first do a simple treatment of the latex paint wall. Remove the latex paint, then sand it and then apply the glue, which will strengthen the putty and make the wallpaper fit more firmly.

3. Or use a wallpaper interface agent to paint the wall, so that the wall will be rougher and easier to paste.