-
See if the base is active or loose.
-
Then there are two situations that will be like this, the first is that the seat spring breaks, causing the offset! There is also the problem of seat fixing screws falling off! The vast majority should be the first case.
-
You have to look at your driver's seat, and the one on the left is not a little damaged, so it is more inclined to that side.
-
Hello, this is generally due to uneven road surface or insufficient tire pressure on one side of yours, you can check it.
-
Relatively speaking, if your tires are not under pressure, it is possible to cause this problem, or if you have a problem with your shock absorption system.
-
Normally, if the main driver's seat is tilted to the left, it is recommended to check whether the seat fixing bracket has collapsed.
-
Hello, you are not sure about this phenomenon, one is the problem of tire pressure, and the other is the front wheel falling into the pit.
-
Hello, your situation is that there is a problem with your car seat, and it is recommended that you go to a 4S shop or repair shop to repair it.
-
Hello, this or there is some problem with the padding of the seat, if you are specific, you can check it.
-
Hello. There is a button on the left side of the main driver's seat [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Hello. There is a button on the left side of the seat. It's the ** regulated. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Yes, it's on the left side of the driver's seat, but it's not big
-
If it is electric, it can be adjusted.
-
The most common reasons why a car can't walk in a straight line are as follows:
1. The tire pressure on both sides is inconsistent, and the solution is to add the standard tire pressure, and see if the wear of the wheels on both sides is inconsistent, so that the wheel diameter and gravity are different.
2. The degree of wear of the tread pattern is not the same, and it will deviate; If the springs and shock absorbers are damaged, focus on the lower side to see if there is any overcompression of the spring due to insufficient elasticity and oil leakage from the shock absorber.
3. Suspension injury, deformation, displacement, etc. will cause deviation.
4. The quality of the steering system will also affect the straight line of the car.
-
The left front tire is too worn or has problems with ball joint damping.
The phenomenon of steering wheel deviation is mostly caused by the deformation of the relevant components of the vehicle's suspension system or poor working performance.
On the one hand, it has a certain relationship with the working performance of the shock absorber and the shock absorber spring, and the deformation of the shock absorber and the reduction of the elasticity of the shock absorber spring will cause the change of the body height; There is also a possibility that the deformation of the balance bar and its small tie rod will also cause the phenomenon that one side of the body is high and the other side is low.
Solution: Generally, you can't repair it yourself, and you should go to a 4S shop for repair.
-
When overhauling this kind of fault in the car, we first need to lift the car, check the suspension system, check whether the stabilizer bushing has been damaged, whether the bolt spring is soft, and whether the performance of the left and right shock absorbers is consistent. Disassemble the transverse stabilizer bar, the lower left cross arm, check whether the rubber ring is aging, replace the damaged parts in time, weld the bracket of the stabilizer bar, test the car again after loading, check whether there is still a fault, if so, need to be further overhauled.
-
A bend of the lower swing arm, a shift in four-wheel alignment, a skewed suspension are all possible.
-
Insufficient air pressure can cause misdirection.
-
Go to the 4S shop to do four-wheel alignment.
-
Cars need to do tire dynamic balancing and four-wheel alignment, and car beauty shops can do it.
-
A few dozen dollars to set a seat is good.
Friends on the 2nd floor, yours is the driver theory. Theory must be combined with practice. >>>More
Strictly follow the rules of the road!
The job of the excavator driver is mainly to operate the excavator and complete various engineering construction tasks. The excavator driver needs to master the operation technology of the excavator, be familiar with the performance parameters of various excavators, and be able to skillfully operate the excavator to complete the engineering task. When a problem occurs, the excavator driver needs to analyze the cause of the problem, find a solution, and take effective measures. >>>More
According to the direction of safety, it is divided into driving safety awareness and driving safety operation. The details are as follows: >>>More
If you're barefoot and don't afraid to wear shoes, come and take on the challenge.