How to lay floor tiles on uneven ground? Do you need to level the floor tiles?

Hello: Ground leveling has cement leveling and self-leveling. Cement leveling contractor is about 10-20 yuan square meters; Self-leveling to see the dosage, the dosage is less than 15-35

The best thing to do is to find a few more levelers**. If you don't know the leveller, you go to the market that sells flooring, pretend to buy flooring from them, and ask them how much it costs. Then ask them for the leveling of the worker's **.

You can also buy cement and sand yourself and ask workers to do the work for you. I think that the workers who are cattle will only be 150 yuan a day. Solid wood floors are laid with floor keels.

But the cost is a bit high, the solid wood floor floor is leveled without charging money, and the carpenter will pull the horizontal line when laying the ground dragon. In this way, the flatness can be guaranteed. The floor should not be stepped on and creaked during use.

The labor and materials of the ground dragon are generally 25 yuan under normal circumstances, plus 10 yuan for the labor cost of laying the floor. Under normal circumstances, the fee of 35 is more reasonable. It's still a relatively low fee.

I just don't know what expenses are included in the thirty-five you said.

My method is to make horizontal lines around the perimeter, and then lay them out with material according to the horizontal lines, as long as they do not exceed the lines. It is easy to do and trouble-free, as for what materials to use, it depends on what materials you pave, I personally think that it is very easy to use a layer of cement first.

Re-leveling. Grind off the high places with a terrazzo machine. Hit the wooden keel leveling.

Tiling floor tiles generally do not need to be leveled on the ground, because while laying bricks can be leveled, the following cement mortar can be flexibly increased or decreased, and because of the first hydropower, then floor heating, to lay at least 3 cm thickness, the floor tiles can be laid safely, so when paving the floor tiles, by adjusting the thickness of the dry ash layer laid under the tiles can be leveled.

After the floor tiles are paved, it is found that it is uneven, and the method of remedy:

1. If the solidified cement is not dry, you only need to gently knock the floor tiles with a wall knife until this brick is at the same level as other bricks.

2. The solidified cement has dried, if it is a few uneven bricks, you need to use tools to take out the uneven floor tiles, and then you need to replace it with new bricks.

3. If the floor tiles in a large area are uneven, it is recommended to rework them all.

Causes of uneven floor tiles:

1. In the process of paving the tiles, if the construction workers do not pave in accordance with the arrow direction on the back of the tile, the wrong operation will lead to the overall unevenness of the tile after the completion of the paving, so it is necessary to remind the construction personnel at the beginning whether to pave in accordance with the direction of the arrow.

2. Some owners will require the construction personnel to seamlessly pave the tiles, although the tiles are beautiful, but the pursuit of beauty should also pay attention to the quality. Tiles paved in this way, it is easy to appear uneven in the later stage, whether you know how to pave tiles or not, the first thing to remember is that it is taboo to paste tiles without leaving seams!

After the tiles are pasted, it is found that it is uneven, which is caused by the carelessness of the decoration master. If the solidified cement is not dry, this situation is relatively simple. You only need to gently tap the floor tile with a knife to guide this floor tile to the same level as other floor tiles.

If the solidified cement has dried out, the situation is repaired to be comparative. It is necessary to use tools to take out the uneven floor tiles, and then kick them in, and then use putty to brush the flat cement solidification after doing it.

If a large area of floor tiles is uneven. It is recommended to rework them all. In order to avoid foot injuries when walking in the future.

Let the master rework. 1 cent does not need to be added. If it's a small area.

Then the uneven bricks need to be reworked. Free rework. If it's dry.

Then you need to break the floor tiles and buy them again, and re-lay them.

Is it necessary to do floor leveling for tiled floor tiles? Before paving the floor tiles, the ground must be leveled, leveled, filled and cleaned, and the soaked floor tiles must be paved. These small details must be paid attention to, which will affect the overall visual effect in the future, and the householder focuses on whether the construction personnel have done these small details at the construction site.

Floor tiles should theoretically adopt the dry paving method, and the dry paving method effectively avoids the occurrence of bubbles, hollow drums and other phenomena caused by the ground tiles in the paving process, but because the dry paving method of floor tiles is more labor-intensive, and the technical content is higher, the cost of the general dry paving method is much higher than that of the wet paving method.

Extended Information: Precautions for Sticking Floor Tiles:

1. The laying temperature of floor tiles should be higher than 10 or more. Before laying, the floor tiles must be placed face down on the construction site for more than 24 hours so that the temperature of the floor tiles is the same as the room temperature. The room temperature should be kept as constant as possible during the laying process.

2. In addition to squares, floor tiles can also be cut into triangles, rectangles and other shapes at will.

3. Before laying, first draw a cross-shaped baseline on the ground. The method is: measure the size of the ground, draw a longitudinal or transverse line on the ground, and then make a perpendicular line through the ** of this line.

If the floor tiles are paved diagonally, the reticle should be drawn at an angle of 45° to the original baseline. For best results, the floor tiles at the edges should be at least half the size of the floor tiles.

Ceramic tile is a very common building material at home, stable performance, green environmental protection, the focus is on affordability, so in some home decoration, the wall and floor are decorated with ceramic tiles, but for owners with no decoration experience, although tiles are very common, but the relevant steps of construction are not understood, so I am afraid of being deceived by decoration workers. So, do floor tiles need to be leveled? How to choose floor tiles?

Let's take a brief look at it together.

1. Do you need to level the floor tiles?

According to Qeeka Home experts, the floor tiles generally do not need to be leveled, because they can be leveled while sticking to the floor tiles, and experienced construction personnel can achieve balance by controlling the amount of cement mortar, so compared with leveling, we should find a construction personnel with strong technology.

Second, how to choose floor tiles.

1. Floor tile glaze: When purchasing floor tiles, you can use the key to gently scratch to see if it is easy to leave traces, if it is easy to leave scratches, it means that the glaze construction is not in place, it is best not to choose, on the contrary, it means that the glaze is better, the wear resistance is good, and the service life is long.

2. Floor tile color difference: when buying tiles, usually the store will only put out one or two pieces for consumers' reference, if you confirm the purchase of this pattern, you should also ask the merchant to take out a few more pieces for comparison, to see if there is a color difference in the tile, pay attention to the good floor tiles will hardly have color difference.

3. Floor tile pattern: Because the general area is very large, so when buying floor tiles, it is necessary to confirm whether the pattern of each floor tile is complete.

4. Specifications of floor tiles: The specifications of floor tiles are generally larger than the tiles used on the wall, but this is not the point, when purchasing, take a few more floor tiles for comparison, to see if the size error is large, if the error is large, it means that the quality of the floor tiles is not good, and it will affect the appearance after construction.

I can responsibly say that there is absolutely no need to do a separate leveling, because when the tiles are pasted, they will use cement mortar, the general thickness is about 3 cm, and the general commercial house cannot have a height difference of 3 cm on the ground, and the only problem may be that the bricklayer will play the horizontal line when entering the site, and some houses will have horizontal errors, but there is no need to do the level, only need to thicken the cement mortar in the low place when the brick is pasted. As for the floor tiles in the bathroom, it's just to find a slight slope, and this doesn't need to be leveled, so the leveling that the decoration company reports to you is purely unprofessional and hacks your money. . .

Auxiliary floor tile construction, in the construction of residential floor tiles, there is absolutely no screed.

The auxiliary process of floor tiles is to use semi-dry mortar as the base layer, and the error of the original ground is leveled.

The original leveling layer of the floor has already been leveled during civil construction, and even if there is an error (most of them have), it is never necessary to do the leveling layer separately. The unit price of auxiliary bricks is low, and the screed is redundant.

Generally, the structural layer needs to be leveled before the finishing of the ground. Then the finishing material is applied. Therefore, after the ground is leveled, it can also be directly attached to the floor tiles (granite, marble, wooden floor, etc.).

According to the Code for Building Ground Design GB50037, the requirements for the screed layer of the ground structure surface:

1. Use 1:3 cement mortar with a thickness of 15mm; 2

C15 or C20 fine stone concrete, thickness 30mm;

Tiled floor tiles generally do not need to be leveled, because one side of the tiles is laid.

One side can be leveled, the following cement mortar can be flexibly increased or decreased, but also because of the first hydropower, then floor heating, to lay at least 3 cm thickness, the floor tiles can be laid safely, so when paving the floor tiles, by adjusting the thickness of the dry ash layer laid on the ground of the tiles, a piece can be flattened. (Beautiful).

In general, there is no need to carry out ground leveling for paving floor tiles, and it can be adjusted directly by adjusting the thickness of the dry ash layer laid under the tiles (unless the flatness error of the ground is particularly large, such as when there is a deviation of 3 cm or even greater).

Many people will choose floor tiles to decorate the ground, so what should I do if the floor tiles are uneven? What are the brands of floor tiles? Let's take a look.

1. What to do if the floor tiles are uneven.

1. If the cement is not dry and the floor tiles are uneven, you can use a wall knife to gently knock the floor tiles.

2. If the uneven limbs of the small area of floor tiles are accompanied, the uneven floor tiles can be replaced with new floor tiles, and the last batch of putty can be brushed flat.

3. If the floor tiles are uneven in a large area, you need to purchase the floor tiles again and rework them all.

Second, what are the brands of floor tiles?

1. Marco Polo.

Brand features: one of the top ten floor tile brands.

First, the well-known brand of China's ceramic industry and the preferred brand of home decoration.

Brand features: Top ten floor tile brands, advanced design concepts occupy the domestic market.

3. Nobel.

Brand features: one of the top ten brands of floor tiles in China and one of the well-known brands trusted by consumers.

4. Mona Lisa.

Brand features: occupy the domestic market with advanced production technology and unique shape.

Brand features: one of the top ten floor tile brands in China.

First, the leader in the floor tile brand.

6. Xinzhongyuan.

Brand features: one of the top ten brands of ceramics and one of the top ten famous floor tile brands in China.

Brand features: 40 years of business development history, healthy and environmentally friendly home life concept.

Brand features: complete product variety, reliable quality, China's famous brand, the top ten brands of national product quality notarization, China's excellent environmental protection green Yusui products.

9, Oushennuo.

Brand features: fashionable, beautiful, luxury, the key high-tech industry of the National Torch Plan, the preferred brand of European home decoration style.

Summary: What to do about the unevenness of the floor tile paving and what is the knowledge of the floor tile brand, it is briefly introduced here, I hope it can help you, if you want to know more, please continue to pay attention to Qeeka Home.

Summary. 1. If the paved tiles have solidified, then you need to take out the uneven tiles, then smooth the ground and then paste the tiles on it, and then brush the putty, and wait until the cement solidifies before you can walk normally.

2. In the case of no solidification, you only need to gently knock the tile with a tool and keep it on the same level.

The tiles have been paved and the ground is uneven.

1. If the paved tiles have solidified, then you need to take out the uneven tiles, then smooth the ground and then paste the tiles on it, and then brush the putty, and wait until the cement solidifies before you can walk normally. 2. In the case of no solidification, you only need to gently knock the tile with a tool and keep it on the same level.

The floor tiles laid by the decoration company are checked with a laser level after paving, and the error from the gate to the balcony is two centimeters faster, is it qualified?

Unqualified. According to the problem you described, it is recommended that you negotiate a solution, and if it cannot be solved, it is recommended that you solve it through litigation.

The overall error is more or less qualified.

The flatness deviation is not more than 2mm, and the height difference of adjacent tile joints is not more than that.

Okay thank you. You're welcome! It's my pleasure to be able to help you!

When unevenness is found when laying floors or tiles, some treatment is required to ensure that the floor is flat, beautiful and safe. Here are some ways to deal with it: Quietly rotten.

1.Self-leveling materials are used.

Self-leveling material is a special liquid that fills uneven gaps in the ground. To treat uneven floors with self-leveling materials, it is necessary to clean the floor first, remove the uneven floor tiles or floors, and fill the uneven ground gaps. The self-leveling liquid is then poured onto the ground and spread evenly using a shovel or scraper.

Self-leveling liquids need to wait 24 hours for them to dry completely, during which time the room needs to be ventilated.

2.Adjust the floor or floor tiles.

If the floor is uneven due to irregular floor tiles or floor laying, adjusting the floor tiles or flooring is an effective method. First, find the problem area and remove the surrounding floor or tiles and the part of the ground where the recess is recessed. Then, check to see if there are any obstructions or intumescent materials that prevent the floor tiles or floor from adhering thoroughly.

Remove the obstructions, then use mortar or glue to resurface the tiles or floors, making sure they are level with the surrounding ground.

3.Smooth the ground.

When the floor cannot be resurfaced or replaced, another treatment is to smooth the floor. This method requires the hiring of a professional floor restorer. They use abrasive pads or other tools to sweep and smooth the floor, which removes raised and sunken surfaces and smooths the floor.

This work can generate a lot of dust, so be sure to keep the room ventilated while you're doing it.

In conclusion, it is not uncommon to find unevenness when laying floors or floor tiles. In this case, consider filling the gaps in the floor with self-leveling material, adjusting the floor or tiles that have been laid, or smoothing the floor. Each treatment method needs to be analyzed on a case-by-case basis, and the most suitable method can be selected to ensure that the ground is level, beautiful and safe.