How to make the bait, and what techniques should be paid attention to when pulling the bait?

Each angler's understanding of "rubbing bait" may be different. According to my personal understanding, the usual rubbing bait should be the thumb, index finger and middle finger after pinching the hook bait, one and a half back and forth can be completed, the bait ball is peanut kernel-shaped, and the atomization is average. If you feel that the fish is not enough, or the bait is too viscous, you need to strengthen the atomization or scattering, you can use the "pinching" method, the thumb, food, and middle three fingers to squeeze and pinch on the hook, then the bait becomes a trilogy shape, although the stickiness of the edged bait has not changed, but it is easier to scatter and atomize in the middle.

Gently rub the bait to slip the hook, that is, after wrapping the bait around the hook, gently rub the surface of the bait ball with your fingers, the more often you rub it, the smoother the bait ball will be. After the smooth, streamlined bait ball enters the water, it is less resistant to the water, and there is very little atomization in the middle of the way. This is a good way to overcome the middle layer of fish and specifically attack the bottom, the hardness, lightness, and thickness of the sticky heat resistance have not changed, and the palatability of the original bait can be maintained.

These kinds are made of bait according to a certain proportion of water, but the water content and the content of brushed powder are not the same, pull bait can be used as rubbing bait, but rubbing bait may not be used as pulling bait. After all, it is a bait made by two different methods of opening the bait, and although the basic constituent material is the same, the purpose is different, so there are many aspects that are completely different.

The bait ball is also different according to the number of brushed powder it contains, the conventional fineness is between 80 and 120 mesh, the longer the mesh, the smaller the bait ball will be, and vice versa. It is recommended not to add it, otherwise it will affect its atomization level, and if it really doesn't work, hit the basin wall twice to improve viscosity and hooking.

Therefore, in the final analysis, the situation of pulling and rubbing bait in the water is mainly expressed by the difference in specific gravity. For example, if you use a bait, you need to use a short rod and a thin line to fish sensitively, and if you use a rubbing bait, you can use a thick line and a long rod to catch a little.

Open rubbing bait and open pull bait, the more single bait composition the easier to control, as long as according to the proportion in the packaging bag, generally up and down if the bait type is too much, when adding water should be well measured, due to the different water absorption of each bait, it is recommended to read all the bait water ratio in the bait bag after adding water to stand for three to five minutes, hot weather can be used immediately.

In addition, we know that the bait can not be rubbed too much or it will affect the situation, the bait is the same, as long as you gently hit seven or eight times along the wall of the basin (except for special circumstances, which will be mentioned below), the general use of rubbing bait is not recommended to add drawing powder, improve the hook of the bait to be adjusted with sticky powder or corn puffing powder, and can be evenly sprinkled on the surface after the bait is static, and collect the water by the way.

Different people have different methods, and it is okay to operate according to the actual situation, and there is not so much attention.

The technique to pay attention to is to pay attention to the direction of rubbing, pay attention to the time of rubbing, and there can be no other operations, pay attention to the way of rubbing, and pay attention to the added water.

Rubbing bait is necessary to choose the appropriate bait according to the actual fishing environment. You should pay attention to the appropriate technique when pulling the bait, and do not use too much force. Avoid direct bites from fish.

The bait pulling method is to put the hook on the bait plate first, then press the bait onto the hook, and pull the strand outward to make the bait group attached to the hook. The size of the lure can be controlled by the angle.

You need to mix the fuel first, or you can put in a small amount of Mamagi can put in some pets, so that you can make a better bait, and you can also make the bait work better.

Rub by hand, and you can increase the viscosity by kneading by hand, you can not knead the bait, you can add a small amount of snow powder, you can add a small amount of brushed powder.

When you go out fishing or competition, in many cases, you will use the skill of rubbing bait, in fact, there are many ways to rub bait, in order to adapt to different fish conditions, you must design the bait state when preparing bait, such as soft and hard, light and heavy, sticky, etc. However, the fish situation can change at any time, and the weather can change at any time. A ball of bait that was very suitable just now, but after a while, it may not be applicable, throw it away?

It's a shame. Change the method of rubbing the bait, and maybe the decay will turn into magic

In the rubbing method, the powder bait will generally become stickier the more you rub it. If you rub the bait that melts into the water for more than ten times, I am afraid that it will not dissolve in the end, so the atomization layer can be controlled by kneading. If there are small fish in the water skin, you can rub it a few more times to let the bait enter the water to the middle and lower layers or the end before it begins to atomize.

If the wind becomes stronger, rub the bait when it is easy to fall off. Be careful not to rub the whole bait together, but to rub it as you go. At the same time as just throwing the rod into the water to observe the buoy, the left hand pinches the bait that can hold two hooks, and rubs it between the thumb, index finger and middle finger of the left hand to keep the original state of the whole bait.

The hardness of the rubbed bait has basically not changed, but it is more sticky, which can prolong the atomization time.

The method of squeezing and dispersing may be different for each angler. According to my personal understanding, under normal circumstances, the bait should be pinched by the thumb, index finger and middle finger after the hook bait, one and a half back and forth can be completed, the bait ball is peanut-shaped, and the atomization is average. If you feel that the fish is not enough, or the bait is too viscous, you need to strengthen the atomization or scattering, you can use the "pinch" method, thumb, food, middle three fingers to squeeze on the hook, then the bait becomes a triangular shape, although the stickiness of the edged bait has not changed, but it is easier to scatter and atomize in the middle.

After wrapping the bait around the hook, gently rub the surface of the bait back and forth with your fingers, and the more times you rub it, the smoother the bait ball will be. When the smooth, streamlined bait ball enters the water, there is less resistance from the water, and there is very little atomization in the middle of the course. This is a good way to overcome the middle layer of small fish, specifically to attack the bottom, the hardness, lightness, and viscosity have not changed, and the palatability of the original bait can be maintained.

There are several situations you said will happen, I don't know which category you belong to: bait production problem: there is no problem with the configuration of general commercial bait, pay attention to the "waking bait" time and bait water ratio problem.

The problem of bait rubbing method: the state and hook attachment of bait are very different depending on the technique. Throwing Questions:

Often, traditional fishing has just been transformed into platform fishing, and anglers do not pay attention to the control of the rod.

If it is a commercial bait, you can refer to the instructions for use, and you can generally get more satisfactory results, such as crucian carp**, bloodworm bait, general bait can be used instead of bait, but commercial bait can not replace bait; Some bait cannot be made even if it is added with brushed powder (wheat protein), which needs to be analyzed on a case-by-case basis.

The commercial baits that are inconvenient to make bait are: Rush Attack, Dongjun, mashed potato powder, etc.; Even if you add an appropriate amount of brushing powder, the effect is not very good.

In addition, the use of pull bait and rubbing bait is very particular, mainly including:

Don't overdo it at one time, and keep the bait fresh and in good condition;

Try not to rub the use period after the bait is opened, otherwise it is very easy to appear "rubber band" phenomenon, which destroys the use state;

The correct way to use it is: after the bait is ready, it is properly kneaded a few times and then the air in the bait is squeezed out, and then rubbed or pulled;

Some potatoes or tired bait must be kneaded and used, such as: single product mashed potato powder, single product granular powder;

The following is a bait formula and preparation method for reference:

Pellet Powder 30% + Pellet Mate 10% + Crazy Fishing Crucian Carp 30% + Crazy Fishing Crucian Carp 2 10% + Wheat Protein 20%, bait-to-water ratio.

Preparation method: Mix the above bait evenly in proportion, add the amount of water at one time according to the bait-water ratio, stir immediately, and after standing for 5 minutes, the group rises and squeezes the air, and you can make a bait for fishing big crucian carp.

Open hand rubbing bait, according to the depth of their own fishing shed, strictly control the amount of water and grasp the viscosity, should not be too thin, too hard, soft and hard like their own earrings as soft and elastic, water absorption is even, feel good, not sticky, a rub into shape, rub to the hook on the bait surface smooth.

Generally, the thumb, index finger, and middle finger of the left hand (left-handed people use the right hand) are used to rub the bait. The left-handed (left-handed with the right hand) thumb, index and middle fingers naturally bend the bait inward, and the amount of double bait should be grasped at one time. After a slight rub on your hands, make the bait a cylinder (not too slender).

Then lightly clamp the bait on the surface of the finger between the index and middle fingers, ready to rub and attach to the hook at any time (this not only speeds up the bait, but also does not affect the unloading of the hand guide line). After the fish is protected, the right hand (left-handed is left-handed) holds the rod with the palm of the hand naturally bent inward, and at the same time, pinch the lead base or the strand below the lead seat with the thumb, index finger, and middle finger. While the twin lines are naturally separated, the thumb of the left hand (right-handed is the right hand) is flexed inward, and the fingernail is pinched on the middle of the bait post between the fingers, and the thumb is upturned so that the bait post is divided into two, one remains between the fingers, and the other is already on the thumbnail cover.

Then place the hook on a strand and place it on the bait sandwiched between the fingers, take a strand with the right hand (or left hand) to make the hook sink into the bait, and then quickly rub the thumb, index and middle fingers of the left hand (or right hand) to rub the bait in the hook. In the process of rubbing, the tips of three fingers are deliberately adducted, and the result of the bait is naturally in the shape of a small and round droplet. After the first bait is rubbed, the thumb of the left hand (or right hand) is bent inward, and the other bait is quickly dialed from the thumbnail to the middle and index finger with the middle and index fingers, and the hook of the other subline is placed on the bait, and the above bait rubbing action is repeated, and the double bait is rubbed, and the whole process of rubbing the bait is over.

How to open a rubbing bait:

Compared with pulling the bait, it is easier to open the bait, which may also be one of the biggest factors for the majority of anglers to like to rub the bait.

The general direction of the open bait and the pull bait are the same. The difference is that rubbing bait generally does not add or less brushing powder. (Of course, sometimes you can also use a good bait to rub) the proportion of bait water must be mastered, and the specific proportion is uncertain. It is flexible according to the water absorption of the bait, and it should not be too hard.

It should not be too soft, it should be elastic, and the softness should be similar to that of the earlobe. Be sure to make the bait absorb water sufficiently and evenly, and control the viscosity of the bait by the number of times you stir it.