Is the door cover at home at a right angle, or is it better to splic?

If your home decoration style is very luxurious, it is recommended that you use splicing, if it is just a general family, it is more appropriate to choose a right-angle one. When decorating a small white house, many places will not be understood. If you are not careful, you will be pitted by the decoration team.

Therefore, for the sake of insurance, it is recommended that you must see and learn more before decorating, so as not to regret it in the future.

Advantages and disadvantages of right-angle and splicing First of all, the method of installing the door sleeve is divided into right-angle installation and splicing installation, and these two installation methods have their own advantages and disadvantages. Most homes will opt for a right-angle installation. Because, it is the easiest and most convenient, does not need to be cut, and the construction speed is fast.

There are also no high technical requirements for the decorator, but this right-angle installation is only suitable for designs without shape. If there was a shape, it would be ugly.

Let's talk about the splicing door cover. As you can tell from the name, the process of splicing the door sleeve will be more complicated. Splicing can only be done after cutting, which requires a high level of technical skill on the part of the decorator.

If the technology is not in place, there will likely be a gap in the installation of the door cover, which will make OCD very uncomfortable. In addition, there will be gaps in the door sleeve, and the sound insulation effect and dust blocking effect are very poor, which will have a great impact on the future home life.

Which one to choose depends on the overall decoration style of the home, however, the spliced door cover is very beautiful on the whole. Whether it is a shaped door sleeve or a non-shaped door cover, it is very suitable. It will enhance the texture and high-end quality of the home, and from this small detail, you will feel the atmospheric style design.

Therefore, the splicing door cover is generally suitable for the decoration design of luxury and wealthy families.

If you are just installing a door sleeve for an ordinary home, I personally recommend that you install a right-angle door sleeve. In fact, the main function of the door casing is to close the door and insulate the sound. Shape and aesthetics are not very important, after all, molded door covers are definitely more expensive.

Therefore, when the average person chooses, he only needs to consider choosing the best door cover.

The door sleeve at home is a right angle, or a better splicing, a better splicing. We are very entangled when we decorate the house, but we are also very happy, we will encounter such and such problems, let us choose, but we lack this knowledge, we are not very familiar with this aspect, for the choice of door cover we will hesitate is right-angle or splicing? It's still a little better at right angles.

This method of right-angle decoration of the door sleeve is very convenient when decorating, no need to cut anything, such a method decoration master is very like, not only can save time and effort, but also easy to operate, but such decoration will look very ugly, will not be very beautiful, because our door sleeve is shaped. If you choose to splic, this decoration method has very high technical requirements, if the Zhuangzi master's technology is not in place, there will be a seam, so it doesn't look very good-looking, <>

The reason why we choose this decoration method is to look good, but in such a situation, the purpose we want is still not achieved. However, if the decoration master's technology is very good, the production is also very good, and it is very atmospheric and high-end, which is also the reason why many people choose the decoration method of splicing. But we still have to think about the consequences, after all, the skills of each decoration master are different, we must think about the worst consequences when choosing splicing, and don't be very unhappy with the decoration master at that time.

It is recommended that you still choose a right angle when choosing, because we make this itself for sound insulation, followed by beauty, if the choice of splicing, the decoration master technology is not in place, so not only is not beautiful, but also can not achieve the effect of sound insulation, so it seems that it is better to choose a right angle. Of course, it still depends on our own opinions, after all, we will see every day in the future, and it is best to feel comfortable.

It is better to have a right angle, easy to install, and the overall simplicity and beauty. Splicing door sleeves is particularly troublesome for decoration workers and has high requirements for construction technology, if workers do not do well, splicing door sets will leave gaps.

I think it's better to have a right angle, because the quality of the splicing is uneven, and the installation is not convenient, and it is very easy to have problems. The right angle is not only easy to install, durable, but also more beautiful in appearance.

The door sleeve will be better if it is spliced, although the aesthetics are still good-looking at right angles, but in the later stage of long-term use, it will still cause some breakage, so the splicing will be relatively stronger.

When decorating, do "door covers" with right angles or splicing? After listening to the master, don't be careless.

The installation method of the door frame is roughly the same, but it is distinguished from two different methods: bevel and right angle, so which of the two methods is better? What is the difference between the two approaches?

Bevel and right angles.

The right angle method is a relatively simple <>

Direct splicing of door casings.

You don't need to make much cutting, you can just put it together. In this way, the construction is very fast. 90-degree splicing eliminates the steps of cutting horizontal and vertical door sleeves, and the installation is very simple, as long as the door sleeve strips on both sides are pressed against the door sleeve strips at the top, the gap can not be seen intuitively, and the overall look is more atmospheric, so this splicing technique is more popular now.

Moreover, the current house decoration is basically young people, and the home decoration style is modern and simple.

Scandinavian style. The 90-degree splicing of the door sleeve is also relatively natural and neat. However, this method can only be used for door sleeves that do not have any shape. For shaped door covers, using this method will be very ugly. <>

The 45-degree splicing of the door sleeve is made by cutting the door sleeve in both horizontal and vertical directions obliquely, and then installing it on the door frame. But in this way, the requirements for the decoration master will be a little bigger, if the effort is not at home, it will form a large gap on it, and it will look ugly. But if it's done well, it will look a little more refined.

This decoration method of door casing, no matter what kind of door casing, is applicable. The right-angled one will be a little more atmospheric, and the splicing will be more exquisite, but for the shaped door cover, it is necessary to use the splicing one.

Differences: 1. Aesthetics.

The purpose of decoration is not only for the convenience of daily life, but also to make people pleasing to the eye and in a happy mood. In terms of visual effect, the practice of using a 45° bevel angle for the door cover is significantly higher than a 90° right angle.

2. Construction operation.

Although the effect of the bevel angle is good-looking, but the technical requirements of the construction worker are high, and the time is more wasted, there will be a gap at the seam at the same time, and cracking may occur in the later stage, and the practice of the right angle is obviously simpler and time-saving, although it is not as good as the bevel angle in aesthetics, but it is much simpler in installation, and if there is a slight deviation in the construction process, it will not affect the later stage.

3. Matching method.

The right angle is simple and easy to do, and it is also more advantageous in decoration and matching, and it is also more practical, but the combination of bevel angles is slightly worse and the durability is relatively poor.

Both approaches have their own benefits. Each has its own disadvantages, mainly depending on the owner's own requirements, after all, there is no such thing as the best of both worlds, you can only choose the one that is more beneficial to you.

I think for everyone, it is not particularly easy to buy a house now, first of all, the current housing prices are actually quite high, in addition, our income may not have a significant increase for a long time, so in this case, we should not only drain our own savings, but also let relatives and friends borrow more.

And it is precisely because the era of buying a house is a lot of hardship, so we must pay great attention to the decoration after buying a house, do not leave any regrets, for example, some materials we do not understand, some things we do not understand, then we have to ask the decoration master in time, do not insist on their own ideas, sometimes according to the actual situation.

For example, the door cover proposed today, it is better to use the bevel angle or the right angle, it may not matter to us, maybe the bevel is quite good-looking, but in fact, in the actual construction process, there is a big difference between the two.

So when we install the door cover, should we choose a 45-degree splicing? Or is it better to just choose a ready-made right angle? Next, I will analyze this problem for you. <>

Which is more technically demanding?

First of all, no matter what material we choose, we must need to find someone to install, then the 45-degree splicing and right-angled ones must undoubtedly be better installed at right angles, because the right-angle only needs to open the door sleeve strips on both sides and press the door sleeve strips at the top, and there is no gap to be seen.

But the right angle of 45 degrees is not the same, this is really a test of craftsmanship, first of all, 45 degrees of splicing is to splice together after the oblique cutting of the two horizontal and vertical door sets, first of all, it is more laborious when cutting, it is a test of technology, and the time required for installation is also relatively long.

What's more, if the installation is not well or the splicing is not close enough, then in the process of our later use, the gap between the door sleeves will slowly become larger, not only may it be said that it is the first view in the end, but also there will be a risk of hiding ash or something. <>

So which one is better?

After the above analysis, we must have a certain understanding of the right-angle door sleeve and the 45-degree beveled door sleeve, in fact, it really doesn't matter which one we use, the main thing is that it is easy to install and use, after all, it is 45 degrees. The splicing you say it should be good-looking, but it is not particularly good-looking, but it will leave us with some risks that may be said to be inaccurate in our future lives.

So relatively speaking, it is much more convenient to have only one foot, especially now that many young people's home decoration style is more inclined to the modern simple Nordic style, so this 90-degree right angle is naturally used more.

And if the interior decoration of the home is new Chinese, this style may be 45 degrees spliced and used more.

When decorating, do "door covers" with right angles or splicing? After listening to the master, don't be careless.

The beveled ones, the beveled ones are not so sharp and are not easy to hurt people, and the right-angled ones are too sharp and easy to hurt people.

If it is a special set, its practical bevel will be better, because the whole will be more beautified.

I think the bevel is better, because this combination will narrow the gap and give people a more beautiful feeling.

I think it's better to use a bevel angle for the door cover, because it is more convenient to use the bevel angle and can be better maintained.

I think it's better to use right angles, so that it looks cleaner and neater.

The 45-degree splicing of the door sleeve is made up of the door sleeve in the two directions of horizontal and vertical filial piety.

Now dare to install it like this is the real craft, the door sleeve 45 degree splicing is the horizontal and vertical direction of the door sleeve obliquely cut after the spelling. This kind of technology requires a little more difficult construction technology than right angles, so the man-hours of installation are a little longer. If the splicing is not tight enough, the gap between the door sleeve will become larger when the door is opened and closed in the later stage, and it will slowly crack and it is easy to hide dust.

The style of the wooden door ordered by the neighbor is Chinese, so the door sleeve is made of diagonal splicing, so that the door and door sleeve look more high-end and exquisite. The worker said that in addition to the Chinese-style home decoration door cover, 45-degree splicing, as well as European, retro, and nostalgic home decoration styles, the aesthetics are also good.

The benefits of door casings

1. Protect the wall.

Home activities on the corner of the wall bumps and bumps occur from time to time, and the door cover can play a certain role in protection. The walls in the space may be slightly sloping, and the doors are well suited to the walls. The sloping wall can be corrected so that the door can open and close normally.

2. Transitional closing.

The two sides of the wall in the interior space are often made of different materials, and the door sleeve can be used as a closure to achieve the transition. The walls of the kitchen space are all tiled, but the walls of the dining room and living room space on the outside are made of latex paint, wallpaper wallcovering or veneer. Therefore, the intersection between different materials needs to be closed, and the door sleeve is the perfect existence.

Many people will have questions about whether the door sleeve line is better at right angles or diagonally, and today PCHOUSE will answer it for you.

1. Right-angle installation.

It is that the vertical door sleeve line directly wraps the horizontal door sleeve line, and the group Kai is a little higher than the distance. In this way, there are no obvious gaps on the surface, which is more time-saving and easy to install.

2. Diagonal installation.

It is to cut a 45-degree angle at the interface of the vertical door sleeve line and the horizontal door sleeve line. This method is more labor-intensive and more elaborate. The disadvantage is that some people feel that there is a gap on the surface, which is not good-looking, and there is a risk of cracking over time.

3. Which is better?

This is mainly based on personal aesthetics and preferences. In terms of matching and aesthetics, if you have a retro or European pastoral style, it is best to use 45-degree stitching. If it is more modern and simple, it is still 90-degree splicing and looks good.

In terms of technology, it should be higher when installed at 45 degrees, and there should be no deviation. On the other hand, if the face line is stretched and contracted for a long time, it will be ugly, because if there is a gap in the 45-degree interface, it will be obvious. The 90-degree interface is simple and easy to install, and it is more suitable for flat doors, and it is easier to match with the current decoration style.

Another point is that if it takes a long time, there is a slight gap or something, and it is not easy to notice.