Is the return of moisture in the ceiling after renovation due to air conditioning?

After decoration, the resurgence of the ceiling is not necessarily because of the air conditioner, you can check more, whether it is because of the roof leakage or water seepage, or because the wall has water seepage, whether there is no roof above, there is no bathroom waterproof, there are many reasons, you must find out the reason, and then you can determine what caused it?

After decoration, the ceiling is damp, the reason may be upstairs or the exterior wall leakage, or it may be caused by the air conditioning pipe insulation is not good and the condensation is dripping.

Is the return of moisture in the ceiling after renovation due to air conditioning? Well, under normal circumstances, after the ceiling returns to the moisture, it is generally because of the air conditioner, but if you use the air conditioner on hang, there is no problem, if you use the ** air conditioner, there may be this reason, so check it, what is the specific reason and how to solve it, to see the specific situation.

The resurgence of the ceiling is due to the heavy moisture in the home. It's because the waterproofing at home is not done well. For example, the bathroom is waterproof and leaking. We need to strengthen waterproofing, and a similar situation will not arise. Headlines Lai Yan.

Your question is, is it because of the air conditioner that the ceiling returns after renovation? For this situation, then I don't know, first of all, you go to observe, if there is moisture, it means that there must be a leak, or there is a wet place, only by observing, can you know what is the cause?

The waterproof layer of the external wall of the building is damaged, causing water seepage in the building. If this is the reason for the resurgence of the wall, it is necessary to contact the property or developer to carry out a comprehensive renovation of the waterproofing of the exterior wall of the building. Water seepage on the exterior walls of the building, especially after rain and snow, is a big problem that the owners cannot solve on their own.

Strengthen ventilation and open windows frequently. Find some clean cloth bags and put them indoors with raw stone and ash in the room. Use a dehumidifier or an air conditioner with a dehumidification function.

Use dehumidification kits and dehumidification boxes, which are easy to buy on the market. The air is humid and generally not to the extent of condensation dripping, please consider whether there are other reasons such as leakage of pipes upstairs, it is true that condensation can be used as an insulation layer on the ceiling, as long as a small amount of Hongming insulation materials can be improved a lot.

New house walls damp:

1. Use dehumidifiers. The room is damp, and desiccant and activated carbon can be used to prevent moisture and absorb moisture. Desiccants and activated carbon can be used. There are many desiccants in supermarkets that are specially used for moisture-proof and dehumidification, and the most common are two types: moisture absorption boxes and dehumidification bags.

2. Buy an air dehumidifier, it is like a vacuum cleaner, it can concentrate the wet air together, and when the moisture is wet, it will turn into water many times. Dehumidify with air conditioning. Air conditioners used in the home generally have the function of dehumidification, but the way of adjusting the humidity of the indoor air is slower, generally takes two or three hours, and it will make the people in the room feel cold.

3. Use lime and bamboo charcoal to dehumidify. Use a small cloth bag to pack an appropriate amount of lime, tie it into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor damp situation, at the same time, lime also has the effect of disinfection, killing two birds with one stone. Bamboo charcoal dehumidification can be used repeatedly, but the more it is used, the less the effect is not very good.

4. When the outside moisture is heavy, the doors and windows should be closed to prevent moisture and moisture. In normal times, windows should be opened for ventilation to reduce the indoor water vapor content. Especially in newly renovated houses, the moisture is particularly high, and it is necessary to ventilate more to remove moisture.

3. Buy an air dehydrating breather, it is like a vacuum cleaner, it can concentrate the wet air together, and when the moisture is wet, it will turn into water many times.

4. Use air conditioning to dehumidify. Air conditioners used in the home generally have the function of dehumidification, but the way of adjusting the humidity of the indoor air is slower, generally takes two or three hours, and it will make the people in the room feel cold.

5. When the outside moisture is heavy, the doors and windows should be closed to prevent moisture and moisture. Usually open more windows for ventilation to reduce indoor water vapor content. Especially in newly renovated houses, the water vapor is particularly large, and it is necessary to ventilate more to remove moisture.

6. When the indoor humidity is too heavy, if you are not using the computer or TV, it is best to make a protective cover to prevent the rear of the electrical appliance from contacting the moist air. These electrical appliances should be turned on more often, and the heat generated when the machine is running can effectively dissipate moisture.

The wall that has been renovated suddenly has a resurgence of moisture, and we canGo to the supermarket or buy some moisture removers online, which can absorb moisture from the walls, or use something like activated carbon to absorb moisture from the walls of the room.

1. Use air conditioning to dehumidify. Air conditioners used in homes generally have the function of dehumidification, but the method of air conditioning to dispatch indoor air humidity is slow, generally takes two or three hours, and will make people in the room feel cold.

2. When the outside moisture is heavy, the doors and windows should be closed to prevent moisture and moisture. Usually open more windows for ventilation to reduce the indoor water vapor content. It is a new house that has just been renovated, and the water vapor is extraordinarily large, so it is necessary to ventilate more to keep the moisture **.

3. During the period of excessive indoor humidity, if you do not use a computer or TV, it is best to make a protective cover to prevent the rear of the electrical appliance from touching the humid air. These appliances should be turned on more often, and the heat generated when the machine is running can effectively repel moisture.

4. When there is too much moisture in the room, it will cause the appearance of moldy and hairy hair on the wet wall. When indoor mold spreads, it will have a very bad effect on the human body, especially for people with allergies.

5. When there is mold on the wall, you can first brush off the mold stains with a dry toothbrush, and then wipe it quietly with a soft cloth dipped in alcohol, so as to make the wall monotonous and prevent mold breeding.

Credit Home Decoration Network recommends the treatment method of wall moisture.

If the wall is damp, it is normal for the local climate to be humid or the back of the damp wall is damp, and the wall is damp due to water seepage from the back.

1. Thoroughly clean the peeled and damp wall with a shovel.

2. Continue to remove the floating ash on the wall to prevent the floating ash from affecting the bonding strength.

3. Evenly brush the separator with a brush and apply it 2-3 times, with an interval of about 3 hours between each time.

4. After the isolator is dried, the putty can be scraped in batches, and the batch scraping time is not less than 24 hours each time.

What should we do when the wall is damp again? Today is a long time to see.

There are many reasons for the resurgence of wall moisture.

1. It may be that the waterproofing of the wall is not done well, and the rainwater infiltrates the wall on rainy days to form a return to moisture 2. There is a leakage on the roof, bathroom, kitchen or window, especially in the bathroom and kitchen.

3. Weather-related, such as returning to the south and the rainy season, it is also easy to appear, because the indoor temperature is lower than that of the outdoors, and the water vapor is cold to form condensation, especially on the tile wall.

For the wall moisture return, it is necessary to first overhaul it, and repair it for waterproofing and water leakage; In view of the weather returning to the south and the rainy season, a series of moisture-proof and dehumidification should be carried out. First of all, the whole house is dehumidified, the effective way is to use a dehumidifier, and the home has used a European well to reduce the air humidity to dehumidify the whole house, which is effective. For local or small places, use dehumidifiers, etc., in addition, ventilate on sunny days to keep the house dry.

What should we do when the wall is damp again? Today is a long time to see.

What is the cause of the resurgence of wall moisture in winter and what are the solutions? Let's take a look.

Dehumidification with an air conditioner: An air conditioner used in a home usually has a dehumidification function, however, the method of regulating the humidity of the air inside the air conditioner has a slower effect, usually taking two to three hours, and can make the person in the room feel cold.

When there is a lot of humidity outside, doors and windows must be closed to prevent moisture. In general, windows should be ventilated to reduce the amount of water vapor inside. It is a new house that has just been renovated. Water vapor is very large and requires ventilation and ventilation to eliminate moisture.

In indoor humidity, if you're not using a computer or TV, it's a good idea to make a protective cover to prevent cold air from touching the back of the appliance. These units should be turned on more, and the heat generated during machine operation can effectively drain moisture.

Daily splashes of water on the walls of kitchens and bathrooms can cause the walls to get wet, which is one of the more common causes of wall restart. This is especially true for kitchen cabinets and bathroom cabinets. This is because water is often splashed when washing vegetables and washing dishes along the walls of kitchen cupboards.

It is recommended to fill the joints between kitchen cabinets, bathroom cabinets and walls with glass glue to prevent water from flowing and disappearing wall phenomena from disappearing.

The waterproofing layer of the exterior wall is damaged.

The waterproofing layer of the building's exterior wall is damaged, causing water to leak into the building. If this is the reason for the wall to return to the tide, you must contact the hotel or developer to completely correct the façade of the building. The exterior walls of the building are leaking, especially after rain and snow.

This is a big problem that the owners can't solve on their own.

The wall is not well done.

If the insulation of the wall is not good, it will cause a large temperature difference between the inside and outside, so that the water in the indoor air will condense on the wall when it cools, which will make the wall wet. It can be ruled out by doing a compression test, and if the suppression test fails, it indicates that there is a leak somewhere in the pipeline.

Hope it works for you.