After a long time, is the tile falling off of the house a problem with the quality of the tile cemen

Both of these reasons are possible, the tile paste is not good, and the quality of the cement is not good. However, the chance of the craftsmanship of the bricklayer master is still relatively large.

Most of them are because of the quality of ceramic tiles and cement, so when decorating the house, you must choose better quality cement and ceramic tiles.

There is a greater chance of cement problems, if the tiles are of inferior quality, they may fall off due to moisture or other reasons in three to five years.

Wall tiles can play a good decorative role, and it is easy to use and easy to take care of, so many families will choose this decoration method, but because there are many ways to paste tiles, cement is the most common one, and fine sand is usually added to improve strength. So, will the pure cement sticker fall off? What should I pay attention to when pasting wall tiles?

Let's take a brief look at it together.

1. Will the pure cement wall tiles fall off?

It will not necessarily fall, but the use of pure cement wall tiles, the probability of tile falling off is very large, because although pure cement has a good cementing ability, but its shrinkage is very large, after the cement is dry, it will bring greater tension to the tile, so the tile is prone to hollowing.

or cracking, etc., the wall tiles may fall off after a long time, so it is recommended that it is best not to use pure cement to stick the wall tiles.

Second, what need to be paid attention to when sticking wall tiles.

1. Before pasting wall tiles, you need to soak the tiles in water one day in advance to let the tiles fully absorb the water, otherwise after pasting the wall, it will absorb cement mortar.

The moisture in the cement mortar affects the adhesion of the cement mortar, resulting in the hollowing of the tile.

2. Usually cement mortar will be used for tiles, this proportion is not fixed, and appropriate adjustments need to be made according to the actual situation, otherwise the wall tiles may fall off or crack because of the improper proportion, usually adhesive.

The ratio is 1:3.

3. Because ceramic tiles are easily affected by the environment, they are prone to thermal expansion and cold contraction.

Therefore, when paving wall tiles, be sure to reserve expansion joints of suitable size.

However, it is important to ensure that the gaps are horizontal and vertical, so as to ensure the service life of the tiles.

4. In the process of paving tiles, it is necessary to wipe off the overflowing adhesive material in time, otherwise after the material is dry, it can only be scraped off with special tools, which is easy to damage the brightness of the tile surface, and pay attention to scrubbing the surface with a wet rag after scraping.

Summary: The above about whether pure cement wall tiles will fall off, as well as the precautions for wall tiles, I hope it will help you.

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then stir with water, which is basically zero pollution, high adhesion, and preferential treatment.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that it is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

The traditional cement river sand can no longer meet the requirements of the tile, and the size of the tile is getting larger and larger, so it is more difficult to stick, so it is recommended to use professional knot materials, such as porcelain stickers to paste tiles, or dry hanging stone.

Hello: Personal opinion: Reason 1: The wall needs to be brushed, and your wall is too flat, resulting in poor combination between cement and wall (commonly known as two skins).Reason 2: The most obvious place where the tiles fall off are the air ducts of bathrooms and kitchen building products, which are not well bonded with the cement and are easy to fall off (generally to be hung for net construction) Reason 3: The cement label is low, or the cement is expired and the quality is inferior, which can cause the tiles to fall off.

The use of cement river sand to paste tiles is easy to crack, hollow and even fall off, and the common reasons are as follows:

There is a problem with the proportion of cement river sand, which leads to the inability to meet the requirements.

The quality of ceramic tiles is better, the water absorption rate is reduced, and the difficulty of bonding increases when the size increases, and the strength of cement river sand does not meet the requirements;

The tiles are not soaked in enough water, or the wall is not sprinkled with water, and the wall tiles are not fixed and supported after they are paved;

The quality of the cement used is defective, the label is too low or it has been opened for too long and has expired;

When paving, the thickness of cement river sand is not up to standard, and it cannot meet the requirements of adhesion force;

The walls are not clean and coarse cement river sand, there is white ash or light treatment.

Summary. After the tile paving is completed, the water is not sprinkled in time: for the wall using ordinary clay bricks to pave, in the case of high temperature, the tiles paved on the day should be timely sprinkled in the evening, and then the next morning and evening again for sprinkling maintenance, so that the tiles can be dried naturally, if the water is not sprinkled in time, then the tiles will be paved because of too fast drying, and the cement mortar will not reach the standard of curing, and the tiles will fall off over time.

After a long time, is the tile falling off of the house a problem with the quality of the tile cement or the bricklayer master?

After the tile paving is completed, the water is not sprinkled in time: for the wall using ordinary terracotta bricks to pave, in the case of high temperature, the tiles paved on the day should be sprinkled in time in the evening, and then the next morning and evening again for sprinkling maintenance, so that the tiles can be dried naturally, if the water is not sprinkled in time, then the paved porcelain smile line bricks will be because of too fast drying, there is no bump so that the cement mortar can reach the standard of curing, Over time, tiles can fall off.

Tile paving does not leave expansion gaps: for the paving of wall tiles, no matter what type of tile is used, the expansion gap between the tile and the tile should be reserved when paving, so that the tile can be affected by the temperature when the natural thermal expansion and cold flushing contains fiber shrinkage without problems, if the wall tile is paved without leaving an introduction gap, scattered imitation then the tile will be squeezed each other when affected by thermal expansion and cold contraction, so that the tile will appear hollow and then the old head will fall off.

What is the reason for this: the floor tiles do not stick to the cement The back of the brick does not stick to the cement: the same brick kitchen: the tea room is fine The outdoor terrace is completely detached.

What is the reason for this: the floor tiles do not stick to the cement The back of the brick does not stick to the cement: the same brick kitchen: the tea room is fine The outdoor terrace is completely detached.

Both are possible.

It should be a matter of cement.

3mm sewing remains

3mm sewing remains

It may also be that the tiles are not maintained in time after they are pasted.

There is no space indoors: the more than 100 outdoor ones are basically all separated.

There is no space indoors: the more than 100 outdoor ones are basically all separated.

That's fine.

Same process at the same time.

Same process at the same time.

It should be that the tiles were not handled in place at that time.

Outdoor ones may not have been carefully maintained.

Is there anything else I can do to help you? If you are still satisfied with my service, please give me a review

A few years ago, how to paste tiles on the cement wall so that it would not fall off?

A few years ago, how to paste tiles on the cement wall so that it would not fall off? Kiss! Hello, glad to answer for you.

A few years ago the cement wall, how to paste tiles without Sohui will drop the method: a few years ago the cement wall, how to paste so that the bricks will not fall, before the decoration, check whether the wall has cracks, loose, falling off, etc., or the leakage collapse with a key on the wall to scratch, if it is just a trace, such a wall directly paste tiles is OK, if you use the key to draw the wall dust, or there is loose, falling off, cracks, etc., can not paste the tiles, even if the tiles are pasted, it will not take long, there will be quality problems. A few years ago, the cement wall, with the gradual aging of time is inevitable, and the house decoration has been for a few years, cement quality construction and other aspects can not be completely exquisite, with a long time, the cement wall will have some quality problems, in order to relieve the worries, shovel off the original wall of the cement mortar layer, re-use the trowel mortar to smooth the wall, a few years ago the cement mortar layer is not easy to shovel off, but also a more time-consuming, labor-intensive, labor-intensive, cost-consuming project.

When shoveling the cement mortar wall, try to be careful, so as to avoid damaging the wall, shoveling the cement mortar layer on the wall is more time-consuming, although the cost of decoration is increased, but this can fundamentally solve the wall problem, no longer have worries, if you do not shovel off the mortar layer on the old wall, paste the tile directly, the cement wall a few years ago can not bear the weight of the tile, there will be a situation such as falling off the brick, shovel off the original cement wall to sell the round, re-smooth the mortar layer, paste the tile once and for all. After the wall is shoveled clean, the indoor cleaning is clean, and the wall is evenly smoothed with trowel mortar, the trowel mortar is mixed with dry powder material, add an appropriate amount of water, stir evenly and you can construct, when the wall is smoothed, the wall is poured with a layer of water, and it is best to let the wall absorb more water, so as to avoid the strong surface absorbing the moisture in the cement mortar, resulting in poor early strength, and the wall is not drenched with water, and the direct smoothing mortar is prone to quality problems. Before smoothing the wall, the procedure of water spraying on the wall is very critical, to determine the quality of decoration, after the wall is smoothed and solidified, the interior is cleaned again, and the wall can be pasted with tiles, there are many kinds of various brands of tiles in the building materials market, according to the tile material, choose the corresponding paste tile accessories, there are many kinds of ceramic tile accessories, cement mortar, tile back glue, tile adhesive, etc., although the wall is re-smoothed with the cement mortar layer, but the tile back coating glue is an emulsion, not suitable for sticking large area of wall tiles.

When the tile is coated with adhesive and pasted with tiles, use a small roller to brush the wall paint, stir it evenly two hours in advance, and use a small roller to evenly coat the back of the tile, which is more time-consuming, because the back glue is very thin emulsion, when pasting the tile, there is no possibility of leveling, in this case, the tile back glue paste wall tile is not suitable, the traditional cement mortar paste tile effect is good, the tile needs to be blistered before pasting, so that the tile can fully absorb water.