How to solve the problem of Simmons bed softness without changing the mattress

Choose a 6 cm palm mat and put it on Simmons, and choose a hard mattress to solve the problem that the soft mattress is too soft, and the palm mat belongs to the hard mattress.

There are many types of palm mats, the most common are coconut palm (cheaper), followed by mountain palm (best used, but costly), jute palm and oil palm (more brittle).

Coconut palm is divided into hard palm and soft brown, mainly depending on the amount of natural latex, hard brown natural latex more, hard palm is as hard as a plank bed, but it is better in breathability; Soft brown is classified as soft brown because the natural latex spray is less than the hardness of the plank bed, which is soft and has low elasticity; The disadvantage of coconut palm is that it contains sugar, and although it has been processed, it is not 100% free of insects.

Mountain palm has no soft and hard division, natural latex spraying is also hard and soft at most, there will be no hardness of the board, the reason for this is that the mountain palm silk is longer than the coconut palm silk, thicker, natural latex is softer than the hard brown after bonding, and the elasticity is enough, the support is strong, the sleeping feeling is better than the coconut palm, the mountain palm flake silk itself does not contain sugar, and there are no insects after treatment, but because the material is scarce and high, the cost is twice that of the coconut palm. Mountain brown mattresses also have handmade mountain palm mattresses and brown shed beds without glue. To be the best mountain palm mattress in terms of sleeping feeling, hard and soft, and the grade is also high, many businesses use coconut palm to pretend to be mountain palm, and there are many people on the Internet, Tmall, etc., who use mountain palm as the title, and the actual product is coconut palm.

Choose a firmer mattress to place on top of the Simmons mattress, or choose a 6 cm brown mattress to place on top of the Simmons.

Hard bed: A hard bed prevents the spine from curvading, supports the lumbar spine, and allows the lumbar muscles to relax and recover at night, so it is usually recommended to sleep on a hard bed. But it will definitely not feel as soft as a soft bed.

Soft bed: The area of contact between the body part and the bed surface is increased, and the area that is squeezed is also increased, which affects the blood circulation on the surface of the body. Although the upper muscles of the body can be relaxed, the lower muscles are compressed, and the symptoms will be aggravated by people with lumbar muscle strain, hyperostosis and cervical spondylosis.

But the good thing is that the water is comfortable.

How to change the Simmons mattress jacket: The way to change the Simmons mattress jacket is as follows Step 1: Cut the hail thread from the edge of the spring mattress to find the position of the end of the edge suture, and use a cracker or utility knife to break the thread, pull it off the mattress fabric, and remove it.

Repeat the same process on the other side of the mattress, setting the fabric bundle aside. Disassembly Step 2: Remove the mattress wrap Once the mattress binding cords are removed, you can pull the wraps on both sides off the mattress.

Disassembly Step 3: Pull the top layer of the mattress down When you pull down the top wrap layer, you will find a layer of fluffy padding or foam. However, it is necessary to remind everyone to pay attention to the fixed parts when pulling, such as small nails.

At this time, we can roughly see the cause of the damage to the mattress, if there is a problem with the filling, we can repair it, but if there is a problem with the spring, we need to move on to the next step. Dismantling step 4: dismantle the fabric and the internal filler at this time the gloves we prepare come in handy, slowly remove the fluffy filling by hand, you need to remind you to avoid excessive force during the dismantling process, otherwise it will damage the filling layer, generally this filling is usually composed of cotton and foam.

Dismantling step 5: remove the bottom filling layer of the mattress and pull off the thin layer of fabric at the bottom, some spring mattresses may also have an additional layer of foam cushioning layer at the bottom, we should also be careful when dismantling, and the spring can be repaired after completion. Teardown Step 6:

Once the metal springs have been rolled over to remove the fluff and fabric, you will see the internal springs. However, the treatment of each type of spring is different, and we must pay attention to it when dealing with it.

Simmons. The mattress jacket should refer to the fitted sheet.

The fitted sheet is often easier to remove, but it is more cumbersome when it comes to attaching it.

Because the fitted sheet is to lift the entire mattress, you can try to install the two corners of the head of the bed first, stretch it down, and pull it tight, it will be more beautiful and practical. If the side of the bed is against the wall, it is better to move the bed a little bit, after all, you can't put yourself on the mattress and then lift the mattress up.

Simmons on the market has three kinds of mechanism and manual or local manual system, and the product quality is generally more advanced using modern equipment, and brand-name products can be purchased. In addition to looking at the brand, it is also necessary to look at its quality.

The landlord should have bought a fitted sheet If it is dirty, just wash the fitted sheet The landlord can search** Fitted sheet or Simmons set My family just bought a few Very good View the original post

If Simmons is too soft to sleep with low back pain, it is recommended not to sleep Simmons, remove Simmons and sleep directly on the plank bed, if the plank bed is too hard, you can add some cotton wool.

If Simmons is reluctant to throw it away, you can buy a wooden bed or this palm mat to sleep on, the wooden bed is hard, non-breathable, and the palm mat is supportive and breathable.

Simmons will try to adjust the noodles, maybe it will be able to support it for a while. Add a hard mattress to support it for a while.

There are many types of palm mats, cheap ones are adhesive coconut palm (hard model), polyester fiber and coconut silk hot-pressed mattresses (damp and easy to disperse, need to add DuPont anti-mite waterproof fabric), there are also expensive mountain palm mattresses (hard with soft), old brown mattresses (few people can make them, it is difficult to buy), new handmade mountain palm mattresses (the process is simpler than brown shed beds).

Then you can change the mattress or add a mat on top and spread some quilts.

The mattress must not be destroyed.