Lige begonia is also known as rose begonia, what are the maintenance steps of Lige begonia?

The political soil needs to choose the soil with better air permeability, and then we must pay attention to keeping warm, because Lige Begonia is not cold-tolerant, and the soil should not be too wet, or too dry, and prevent water from becoming waterlogged when watering, resulting in root rot.

Begonias are suitable for living between 18 and 22 degrees, try to keep the soil moist, be sure to carry out topping during the growth period, and be sure to prevent the germination of soft rot and other protospore diseases.

I think you should choose to water a little more. In addition, it is necessary to loosen the soil properly and learn to ventilate. When you can no longer water the roots, you can water the roots. Plenty of water.

It needs to be placed in a cool place first, first receive regular sunlight, pay attention to watering and fertilization, pay attention to the frequency not too much, and pay attention to disease prevention.

Lige Begonia. Cultivation methods and precautions: Lige Begonia is suitable for growing at about 22 degrees, it has higher requirements for the living environment, and the temperature is too low or too high to affect it, so that it cannot grow normally.

When the temperature is higher than 22 degrees, the leaves and stems will grow but the flowers will not bloom, and the temperature will be lower than 15 degrees, and its growth rate will become very slow, and it is necessary to pay attention to the large temperature difference between morning and evening. The stalk of Lige Begonia is very thin, and it needs to be controlled after breeding, as long as the soil is kept moist, but do not let the leaves get drenched with water, which will cause its leaves to rot. Stagnant water should not occur, as it will cause its roots to rot or affect its growth rate, so it needs to be drained in time when there is stagnant water.

The growth of Lige begonia needs to absorb enough sunlight, but in the summer it needs proper shade, and when the temperature drops around November, it can be placed in the sun for a long time to absorb sunlight, but also pay attention to heat preservation. After flowering, Begonia needs to prune off the branches and leaves in time to reduce the consumption of nutrients and accelerate its growth rate.

Breeding environment: Lige begonia flowers are maintained in a sunny, ventilated and ventilated place, and shading measures need to be taken in summer. Water and Fertilizer Management:

During the growth period, after the potting soil is dry, it is watered again, and a thin liquid fertilizer with a balance of nitrogen, phosphorus and potassium is applied every half month. Precautions: Prune the broken flowers in time after the flowering period.

1. Breeding environment

Lige Begonia likes a semi-shady environment, in the process of potted maintenance, it can be placed in a sunny, ventilated place, when the light intensity is high in summer, shading measures should be taken, so as not to burn the leaves with strong light, in addition to maintaining the temperature of the breeding environment is ten to twenty-eight degrees, which is conducive to the growth of Lige Begonia flowers.

2. Water and fertilizer management

In the process of maintaining Lige Begonia flowers, it is necessary to wait for the potting soil to dry out during the growth period, then water it again, and apply a thin liquid fertilizer with a balance of nitrogen, phosphorus and potassium every half month to promote the growth of the plants, and increase the application of phosphorus and potassium fertilizer before the flowering period, and control the amount of nitrogen fertilizer.

3. Precautions

When the flowering period of Lige Begonia flowers is over, it is necessary to prune the failed residual flowers in time, and the residual flowers can be cut off together with some flower branches, and at the same time, the overly long branches, diseased and weak branches, and overly dense branches of the plant should be cut off to reduce nutrient consumption, in addition, it is necessary to do a good job in the prevention and control of pests and diseases to promote the healthy growth of Lige Begonia flowers.

Lige Begonia, also known as rose begonia, is a perennial herbaceous flower of the family Begonia. The breeding of Lige begonia is more troublesome, and the temperature of the growing environment is best controlled between 15 and 22, and too high and too low are not conducive to its growth. Watering should especially pay attention to the amount of water to avoid stagnant water.

Usually the sun should be sufficient, and the summer should be properly shaded. After flowering, prune the residual flowers and dead leaves in time to preserve nutrients.

1. Growth temperature

The growth of Lige Begonia is relatively high to the ambient temperature, the suitable temperature is between 15 and 22, the temperature is too high or too low will affect the normal growth of Lige Begonia, the temperature is higher than 25 will occur, and the temperature will grow slowly if the temperature is lower than 10 degrees. Also pay attention to the temperature difference between morning and evening to avoid too large a temperature difference.

2. Watering and moisturizing

The rhizome of watering and moisturizing Lige Begonia is relatively slender, in the maintenance process, we should pay attention to controlling the amount of watering, maintain the principle of seeing dry and wet, and also pay attention to not drenching the leaves when watering, so as not to cause rot of branches and leaves, Lige Begonia needs enough water to grow, not only to replenish water in time, but also to avoid stagnant water.

3. Sufficient light

The growth of Lige begonia needs to have sufficient sunlight, but in summer the light is strong to shade, in October after the temperature drops can gradually enhance the light, in winter when the temperature is low to take insulation measures, can take full sun maintenance.

4. Precautions

Lige Begonia belongs to the more delicate, more sensitive plants, the maintenance process should pay attention to the appropriate amount of watering, reasonable fertilization, it is best to use Lige Begonia special flower fertilizer, in addition to flowering need to prune the residual flowers and dead leaves in time, reduce unnecessary nutrient consumption, strengthen maintenance management.

1. Temperature.

Warm-loving, a greenhouse quantitative short-day plant, growth and development temperature of 18 22, winter in the growth and flowering period, to ensure that the minimum temperature is not less than 15, try to place it in the indoor south-facing sunny place, such as the indoor window sill. In summer, when the temperature is higher than 28, you should take cooling measures, such as putting it in an air-conditioned room or shading at noon.

2. Watering.

It likes humidity and decides the amount of watering according to the principle of seeing dry and wet, and climatic conditions. In summer, when the water evaporates quickly, the water needs a lot, so water in the morning and evening, and the number of watering times is determined according to the wetness of the potting soil. Spray the foliage frequently to maintain air humidity, but avoid spraying water onto the flowers.

When the temperature is low in winter, water at noon on a sunny day, the number of watering should be appropriately reduced, and the water temperature should be close to the room temperature, so as to avoid frostbite to the root system when the water temperature is low.

3. Fertilization.

Lige Begonia has strict requirements for fertilizer, and if you want to apply fertilizer thinly, you can choose special fertilizer for Lige Begonia cultivation. In order to promote the growth and development of the formation, the seedlings can be used nitrogen fertilizer, with the growth of plants, can gradually increase the content of phosphorus and potassium fertilizer, increase the amount of fertilizer before flowering, and can also be appropriately and evenly sprayed on the front and back of the foliar fertilizer, the concentration is controlled at 1% to 2%.

4. Shaping and pruning.

In order to make the plant plump, topping should be carried out during the growth period to promote the germination of side branches of the plant, and excess flower buds should be removed in time to ensure sufficient nutrients.

5. Propagation by cuttings.

In late autumn and early winter, pruning and setting with cuttings or leaf cuttings, new branches can be cut off for cuttings. When cutting, the branches should be of moderate length, and the lower part of the branches should be cut into a horseshoe shape; When cutting leaves, it is necessary to choose the vigorous six-point mature leaves, and cut the lower end of the petiole obliquely with a blade. Cuttings should be prepared with a good substrate, after cuttings should be watered thoroughly, covered with plastic film, placed in a ventilated, astigmatism place for maintenance, about 3 weeks of cuttings or cuttings can be rooted.

1. In the summer high temperature, the growth of Lige Begonia is slow or completely stagnant, in a dormant or semi-dormant state, the residual flowers and dead leaves should be cut off first, and shading 50% to 70%; Control watering and keep the soil slightly moist to prevent rhizome rot caused by excessive potting soil.

2. After the autumn cool, Lige Begonia begins to germinate new branches from the base, and when it grows to a certain height, use a sharp knife to cut off the old branches from the base, and increase the amount of watering at the same time to promote the growth of Lige Begonia. When the new branches are basically set, 3 new branches are retained in each pot, and the rest are all cut off to concentrate nutrients and make Lige Begonia take shape as soon as possible.

After the month, the growth rate of Lige begonia accelerates, in addition to keeping the potting soil moist, it can be applied once in about 15 days with a concentration of compound liquid fertilizer.

4. In winter, Lige Begonia requires sufficient sunlight and the temperature should not be lower than 10. At the seedling stage, when the plant grows to 4 leaves, the topping is carried out to promote the growth of side branches, make the plant plump, and remove the excess flower buds in time, so as not to affect the development of flowers due to excessive nutrient consumption, and remove yellow leaves and diseased leaves at any time.

Begonias are not poisonous, their young stems are edible, and the French even use their leaves to make vegetables, roast fish or make soups.

The cultivation method of Lige Begonia.

The best time to propagate cuttings is late autumn and early winter.

Best Growing Soil Choose a substrate with good drainage, such as coco, peat*, vermiculite, perlite, carbonized bark, etc., and the best soil for growing is 80% high-fiber peat* and 2....

Precautions for breeding Lige begonias.

Fertilizer application a, Lige begonia seedlings fertilization to nitrogen fertilizer, promote growth and development, with the growth of plants, can reduce the amount of nitrogen fertilizer, and gradually increase the content of phosphorus and potassium fertilizer. .