-
This friend, I've been using the computer for so long with your problem, and it comes and goes, and it usually happens once in a while and then restarts and loads. The main reasons for the high frequency of your phenomenon should be as follows:
First of all, rule out the problem of the sound card and board-level hardware, because it can be used normally, and the sound card is a standard design, and there is almost no possibility of problems;
Drives and systems are a big problem. The driver needs to be talked about,It's not better to update,Precisely,When you start to install the machine,The sound card driver inside the motherboard driver is generally speaking,It's the best and most stable,So,You said that your sound card driver has been reinstalled many times,But it may not be the most matched,This,It is recommended to go to the official webpage to find the driver that matches the current system of the matching model。 Before that, uninstall the old driver.
The system is also a nuisance. Be complete and clean, even if it's a ghost version, look for something that is known to be good, and don't go for novelty and over-simplification and choose unreliable sources. The driver used when reinstalling may not be the most suitable, and it is recommended to install it from the official channel**.
If you do this, there is still a failure, it is a hard injury: when you turn on the computer, the sound card often fails to load, which is a defect in the system, and sleep wake-up is a problem with the hardware firmware for a long time. Design defects can go to the after-sales service to ask about the situation, generally a model of common faults in the after-sales where the technical personnel are very familiar with it, to see if it is the problem of the machine itself.
In the case of a case, ask if there is any good way to solve it.
That's basically the process.
-
In addition to the hardware, it is the driver problem.
Uninstall the existing audio driver and reinstall the official website driver.
If you don't understand, you can drive the elf instead.
Good luck.
-
<>1. No sound is a disadvantage because the computer does not bring up the sound card driver when it restarts after hibernation. This is mostly due to the fact that the sound card driver is the operating system of the computer.
The reason for renting the tape is that you need to restart the sound card driver.
2. Go to "Device Manager".
3. Right-click "My Computer" - manage --- services and applications.
services, in the project on the right, find the two selection items of "indowsaudio" and "windowsaudioendpointbuilder", close them again and start them again.
-
The silence is due to the fact that the computer did not bring up the sound card driver when it restarted after hibernation. Most of the reasons for this are that your sound card driver comes with the computer's operating system, and we need to restart the sound card driver.
The steps are as follows.
1. Click Start in the lower left corner to find the control panel.
2. Then find the hardware and sound, and click on it.
3. Then find Device Manager and click on it.
<>5. Then right-click to disable Realtek High Definition Audio.
<>6. Right-click to enable Realtek High Definition Audio.
-
Computer hibernation is a power-saving mode in which the computer shuts down branches and hardware devices to save energy. If the computer does not fully recover during the hibernation process, it can cause some devices to behave abnormally, such as a sound card.
When you wake it up from your computer's hibernation, the sound card restarts, but sometimes the sound card may not recover correctly. This may cause the program or operating system to not be able to use the sound card for audio output normally, resulting in a "no sound" problem.
To solve this problem, you can try the following steps:
1.Replug and unplug related equipment such as headphones and speakers to ensure they are installed and functioning properly;
2.Open the Control Panel, select"Hardware and sound"with"Audio equipment"and see if the current default audio device is correct;
3.update or reinstall the sound card driver;
If the problem still cannot be solved, it is recommended to contact the relevant professional and technical personnel for processing.
-
The computer hibernate and then start up without sound may be due to the following reasons:
Mute settings: You might have muted or turned down the volume before your computer went to sleep. Please check the volume setting next to the ruler to make sure the volume is set to the appropriate level.
Hardware problems: Sometimes rebooting after hibernation may cause some hardware devices to not work properly. Check that the audio device is properly connected and make sure that the device drivers are up to date.
Hibernation mode settings: Some computers may turn off audio devices while asleep to conserve power. You can try adjusting your computer's power management settings to make sure your audio device works properly after hibernation.
If none of the above solutions resolve the issue, it is recommended that you contact your computer manufacturer or after-sales service center for professional technical support and repair advice.
-
Appears after the computer sleepsBlack screenUnable to wake up requires modifying the power options and sleep mode, here's how:
Tools Raw materials: Dell Ring G15, Win10, Settings 1, Open the control panel of Win10 system.
Then select the power option to enter.
2. Select the power plan you are currently using in the open interface, and then click Change Plan Settings to enter.
3. Set the option to put the computer into sleep mode to never, and finally save the modifications.
4. Continue to turn on the power options, make sure Sleep is Never, Mixed Sleep is off, and finally save the settings.
-
The computer that was sleeping suddenly stopped sounding, and I thought it was a computer sound card.
It's bad, the analysis Huai stopped it should be a problem to judge the sound drive, just disable it. Below I will explain to you the solution to the problem of no sound after waking up from the brain sleep of Guan Lao Stool in the electric service Ming Brigade, I hope you like it!
Click on My Computer, right-click, and select Properties to select an item.
Click Device Manager in the top left corner.
<> select Auto-install software, the system will automatically look for backup files that you've saved before. If you can't find it, you can only buy a system installation disk and install it through the optical drive. Click Next.
<> it will automatically look for the previous driver, just select it and you're good to go.
When you have selected a driver, click Next.
-
Reboot without sound after laptop hibernation Here's how to fix it:
1. Enter the "Device Manager" to check whether the sound card driver is normal and whether there is an "exclamation mark" under the "Sound, ** and Game Controller" option. If there is, it can be re-collapsed and newly installed for the driver.
2. Right-click "My Computer" - Manage --- services and application --- services, in the right side of the item, find the "Indows Audio" Windows Audio Endpoint Builder "Slow Dispatch two options, close it again and start it again.
-
The laptop has no sound every time I sleep, and it's good to restart, but every time there is no sound, I have to restart every time.
1. Check whether the sound service is turned on1, open "Start" - "Run" - Enter OK", open the "Service" window 2, find the Windows Audio service, and select [Started] as its status. If the service is not started, right-click the service and select "Start". 2. Check the sound card driverIn many cases, it is caused by the system not finding the right sound card driver.
You can verify it in the device manager: 1. Open "Start" - "Run" - Enter - OK. 2. If Liangqin finds the information of your sound card under the sound, ** and game controller, then the sound card recognition is normal.
If the sound card shows a "red cross" and the sound card driver is disabled, right-click and select "Enable". 3. If you see the "small yellow question mark (or exclamation mark)" icon in the device manager, it is likely that your cheating sound card is not recognized. In this case, you can get the latest drivers for Windows from the hardware manufacturer.
When the machine is bought, it usually comes with some software CDs, and the drivers are often on it. The manufacturer's ** can generally find the latest drivers for Windows systems. 4. You can use the driver software to update the sound card driver, for example
-
1. Press win+r to open the run, enter cmd and press enter;
2. Enter powercfg -a and press enter to execute;
<>4. Enter powercfg -devicequery wake armed in the command prompt, and press enter;
<>6. If it is not in the column, it means that you can't wake up the computer with a mouse or keyboard, then you need to turn on the wake-up function, open the device manager, mouse device, right-click to select properties;
7. Switch to the "Power Management" tab, check "Allow this device to wake up the computer", and click OK.
The computer has been stopped at boot and left in the motherboard logo interface, which means that problems were found in the self-test process of power-on, and they need to be checked one by one, and only after solving the problem can DAO enter the system normally. >>>More
The common causes of screen failures such as screen flickering and screen shaking are: first, the quality of the screen itself, screen aging or inferior products, second, the screen line contact will not be damaged or damaged, and third, the motherboard screen power supply is abnormal or the screen failure caused by the virtual soldering of the graphics card BGA packaging chip, it is recommended that you send it for repair and testing. >>>More
When the boot can not enter the system, many friends think that it is a hardware failure, and some friends know a little bit about it, and replace and disassemble various parts of the computer indiscriminately, these are a misunderstanding, some friends get the computer repair shop, because they don't know the reason for being overcharged, these are the reasons why there is no laptop. Step to read. >>>More
There are three reasons for the fault you said, the software feels fine, first, the fan is dirty and the heat dissipation is not good, which causes the CPU to overheat and lose power, second, there is a problem with the power supply and charging circuit of the motherboard, and third, the power failure phenomenon caused by virtual soldering of the north-south bridge graphics card chip on the motherboard, it is best to find a maintenance point to help you detect it.
Recently, there are many friends asking the mobile phone remote control computer to turn on the method, we often encounter the situation of going back to the company to send information when we rest at home, sometimes the company is far away, what if you don't want to go back? Knowing how to do it below can save you a lot of time. >>>More