How to install the Philips vacuum cleaner wheel

As a national old brand, Philips vacuum cleaner is the choice of many families, and it has been left behind for a period of time before, mainly horizontal vacuum cleaners, and now the trend is almost all handheld vacuum cleaners, so Philips is also developed to catch up with the trend, so how to disassemble Philips vacuum cleaners, used for so long, do you understand?

The first step of the horizontal vacuum cleaner is to disassemble the fan, unscrew the shell with a screwdriver and take it off; In the second step, the button to adjust the suction power is removed, and the guide wheel is removed, and the parts such as the gasket ring, gasket, and impeller are removed in turn; The third step is to disassemble the brushes; The fourth step is to pull out the bearing cover, and the next step is to replace whatever you need.

In fact, the text description is still relatively abstract, you can try it yourself, because each screw is fixed, so remember the various steps and the location of each part when disassembling and installing, so as to avoid subsequent installation. Keep in mind that the parts are basically not washable, so you should prepare a small brush and brush it clean.

The disassembly method of the handheld vacuum cleaner is even simpler, you can unscrew it along the screw, and in many cases, you can do a deep cleaning without dismantling it too smooth.

How to disassemble the Philips vacuum cleaner, the main thing is such a step, in fact, we had better hand it over to a professional will be more assured.

Choose the right vacuum inlet, generally there are three types: flat wide, medium wide, and thin and narrow; After choosing, install; After that, power on the vacuum cleaner; There is a large switch on the main body, and when you press it with your foot, the vacuum cleaner starts to run, and you can vacuum it by aligning it.

How to disassemble the Philips household vacuum cleaner.

Pro, take the Philips household vacuum cleaner FC5822 as an example, the disassembly and assembly methods are as follows:1First of all, it refers to the tung belt to lift the front of the large cover of vacuuming, take out the storage of dust utensils, then see that there are 4 screws before and after, with a word or hexagonal turn, turn out the fixed screw.

2.At this time, slowly separate the power switch knob and take out the button, and turn out a fixed screw below. 3.

With 2, the wheel town then separates the shrink power cord button to take out the button, turn out the following one to fix the screw. At this time, you can gently separate the lid, and you can see the integrated chip and other parts inside. 4.

Finally, you can check the power-on situation, and you can also remove the motor for cleaning and maintenance. I hope I can help you, if you don't understand something, you can click on my avatar to find me to pay ** consultation, I will give you a most satisfactory one! Have a great day!

Summary. The method of removing the impeller of the Philips vacuum cleaner is as follows:1Dismantling the fan 2The button to adjust the suction power, remove the guide wheel, and remove the gasket ring, washer, impeller and other parts in turn. 3.Disassemble the brushes 4Pull out the bearing cover.

The method of disassembling the impeller of the Philips vacuum cleaner is as follows: disassemble the fan, unscrew the shell with a screwdriver and take it off; In the second step, the button to adjust the suction power is removed, and the guide wheel is removed, and the parts such as the reed ring, the washer, and the impeller of the silver belt are removed in turn; The third step is to disassemble the brushes; Step 4: Pull out the bearing cover.

The method of disassembling the impeller of the Philips vacuum cleaner is as follows:1Dismantling the fan 2The button to adjust the suction power, remove the guide wheel, and remove the ring, washer, impeller and other parts of the cushion family in turn. 3.Disassemble the brushes 4Pull out the bearing cover.

Summary. Hello dear, the steps to change the dust bag of the Philips FC8222 vacuum cleaner are as follows; 1. Press the front cover button and gently remove the front cover from the vacuum cleaner. 2. Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can.

3. If you have inhaled fine powder, take out the dust bag holder from the dust bag and gently scrub the dust bag in clean water. 4. Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust cavity, and then install the front cover on the body and buckle it firmly. I wish you a happy life!

Hope mine is helpful to you ha.

Hello dear, the steps to change the dust bag of the Philips Blind Guess FC8222 vacuum cleaner are as follows; 1. Press the front cover button and gently remove the front cover from the vacuum cleaner. 2. Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can. 3. If you have inhaled fine powder, take out the dust bag holder from the dust bag and gently scrub the dust bag in clean water.

4. Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust cavity, and then install the front cover on the body and buckle it firmly. I wish you a happy life! Elder Hima hopes that I will be helpful to you.

Can you add, I don't quite understand it.

Hello dear, the steps to change the dust bag of the Philips Blind Guess FC8222 vacuum cleaner are as follows; 1. Press the front cover button and gently remove the front cover from the vacuum cleaner. 2. Take out the dust filter bag and pour the garbage in the transparent dust chamber into the trash can. 3. If you have inhaled fine powder, take out the dust bag holder from the dust bag and gently scrub the dust bag in clean water.

4. Put the dust bag holder into the dry dust bag, then put the dust bag into the transparent dust cavity, and then install the front cover on the body and buckle it firmly. I wish you a happy life! Elder Hima hopes that I will be helpful to you.

Summary. Philips home vacuum cleaner how to disassemble Hello! Pro-disassembly:

First disassemble the long pipe, elbow, hose, then disassemble the shell, filter, ash removal device, impeller, motor, etc., and list them in the order of disassembly and record them. Before disassembling the electrical part, the electrical control circuit diagram should be drawn according to the physical object, and then disassembled after comparing with the circuit diagram on the original manual. For the connection line between the switch, the control circuit and the motor, which is welded to which point with the wire end, should be clearly marked and recorded when the wire is removed.

How to disassemble the Philips household vacuum cleaner.

Philips home vacuum cleaner how to disassemble Hello! Pro-disassembly: first disassemble the long pipe, elbow, hose, and then disassemble the shell, filter, ash removal device, impeller, motor, etc., and list them in a table according to the order of disassembly.

Before disassembling the electrical part, the electrical control circuit diagram should be drawn according to the real number of things, and then disassembled after comparing with the circuit diagram on the original manual. For the connection line between the switch, the control circuit and the motor, which is welded to which point with the wire end, should be clearly marked and recorded when the wire is removed.

How to separate this head from the can, if you want to change the tube, you just can't open it.

Philips home vacuum cleaner how to disassemble Hello! Pro-disassembly: first disassemble the long pipe, elbow, hose, then disassemble the shell, filter, ash removal device, impeller, motor, etc., and list them in a table according to the order of disassembly.

Before dismantling, the electrical part should be drawn according to the physical electrical control circuit diagram, and compared with the circuit diagram on the original manual, there is no shed old mistake before disassembly, if there is no manual, the drawn circuit diagram should be let the instructor check before disassembly. For the connecting line of the switch, control circuit and motor, which point is welded to which point, should be clearly marked and recorded when the thread chain is removed.