Dampness comes out of the surface, how to prevent moisture from the decoration of the first floor

To choose a good moisture-proof performance of the floor or floor tiles, if the economic situation is more allowed, you can install floor heating, in the decoration must be laid under the bottom of a layer of cement, at least more than one meter, a diseased waterproof should also be done.

The decoration of the first floor should use some waterproof materials to prevent moisture, and at the same time, it is necessary to pay attention to lighting, open a few windows, and pay attention to indoor ventilation. It is also necessary to do a good job of separating dry and wet when decorating.

There should be a particularly good dehumidification system, and some moisture barrier to the ground should be raised, and the most important thing is to choose high-quality floor tiles. For natural ventilation, desiccant can be chosen.

In the decoration process, after the bathroom waterproof coating is done, the interior needs to be waterproof as a whole according to the different uses of the room, and the wall waterproof coating should be made as high as possible, so as to avoid the occurrence of dampness, mildew, peeling, falling off and other situations on the wall. In the decoration process, after the bathroom waterproof coating is done, the interior needs to be waterproof as a whole according to the different uses of the room, and the wall waterproof coating should be made as high as possible, so as to avoid the occurrence of dampness, mildew, peeling, falling off and other situations on the wall.

<> the ground is preferably high-quality bricks, do not use wooden floors, do not use empty walls, increase the width, and choose high-quality warm materials in many home building materials The floor is susceptible to moisture, and if you want to ensure that the floor is not damp and not moldy, you must pay attention to it from the purchase. Personally, I think it is appropriate to stick to the floor tiles in the bedroom, although it is colder, you can choose the color and specifications of the tiles that imitate the wood grain. In addition, it is better to choose furniture with feet.

The top surface is also brushed with wall solid, made of moisture-proof putty, and latex paint can be rolled. The ceiling is made of light steel keel and moisture-proof gypsum board. The kitchen and bathroom use a metal ceiling.

Alternatively, the living room and dining room can also be decorated with an integrated ceiling. For ceilings without the use of wooden keels, or for improved ventilation, a fresh air system can be installed indoors, and ventilation fans can also be installed in the ceiling. In this way, the ventilation effect of the room can be improved to a large extent.

The fresh air dehumidification system refers to the fresh air dehumidification host reaching each room in the room through the pipeline, and dehumidifying or ventilating each room according to the needs of different seasons and periods. It can achieve ** dehumidification and ventilation, and automatically dehumidify the bag according to the humidity value set by the customer. The moisture absorbent bag can absorb water and turn into jelly, and this moisture absorbent bag has a wide range, in addition to clothing, leather goods, stamps, cameras, computers, etc. can be found to help dehumidify.

Tiles should be picked with a non-slip surface to avoid slipping when the surface is damp and condensation in the future, and if possible, a layer of separator can be applied to the ground before laying mortar.

The best thing to do is to drain the moisture from the house and then make a layer of waterproofing on the walls, floors and roofs so that there is no backlash.

First, first of all, it should be clear: waterproof≠ moisture-proof and waterproof refers to preventing water from penetrating into our indoor ground or wall, waterproof is to prevent liquid water, and the best solution for waterproofing is to choose good waterproof materials and construction parties.

Especially for basements, if the waterproofing is not done well, there is not much point in moisture protection. Moisture-proof refers to preventing items and spaces from being affected by moisture, mainly for air humidity, is to prevent underground moisture (gaseous water), and daily dehumidification mainly refers to the removal of excess moisture in the air.

2. How to prevent moisture in the house that has been occupied? 1.Commonly used dehumidification methods in life: l Natural ventilation: If the north and south are transparent or the weather is sunny and the outdoor air is drier than the indoor air, natural ventilation can reduce the indoor relative humidity.

Air conditioning: In this season, the air conditioner is generally turned on at home, in fact, it is not necessarily dehumidified, when the refrigeration is cooled, the effect is very good, and the doors and windows should be closed as much as possible when the humidity is high to prevent moisture from entering. l Desiccant:

Put some adsorption desiccant in the room, the most common is the activated carbon carbon pack, you can also sprinkle some desiccant on some humid corners and the ground, you can break the mothballs and sprinkle the activated carbon powder there to remove moisture, but the desiccant must be replaced every once in a while.

The impact of moisture-proof on the first floor is mainly to affect the decoration of the wall, so when we decorate, we must try to use waterproof materials, in case we do not do a good job of moisture-proof, moisture will affect our decoration.

The ground is waterproof, do it twice, and the corner position of the wall should be 30 cm high! The kitchen is 90 cm and the bathroom is 180 cm, and a moisture-proof mat (a large roll of white film that can be seen in the laminate flooring store) is added under the floor to prevent moisture from seeping through the floor.

The lower the building, the greater the relative humidity of the air, which is prone to dampness and coldness. And clammy cold is the deformation or rapid aging of furniture, household appliances and their daily utensils. Secondly, the natural ventilation capacity of the first floor of the new building is worse than that of other buildings, and once the water is splashed, it cannot be dry.

Therefore, it is necessary to do a good job in the waterproof work at home, including the multi-faceted part of the bathroom, the waterproof kitchen of the restaurant, the waterproof of the living balcony, the floor wall of the residence, etc. And waterproofing contains the actual effect of waterproofing, and multi-faceted waterproofing can ensure that two birds are killed with one stone. At the same time, you can put some activated carbon in the furniture to block the odor and at the same time, it can also digest and absorb unnecessary water in the furniture.

The floor, the foot of the wall, the wall is 50 cm high (the wall of the shower area is 180 cm high). The "National Residential Decoration Engineering Construction Code" clearly states that the waterproof layer needs to be widened from the ground to the wall, 100mm higher than the ground; The waterproof layer of the shower room wall should not be less than 1800mm.

A closed water test must be done: plug all the water in the toilet, and build a 250mm high "threshold" in front of the door, pour in 200mm high water, and after 24 to 72 hours, it can be attached to the wall if there is no leakage.

The ground, the foot of the wall, the wall is 30 cm high, and it can also be partially wiped, and the ground has an odor-proof floor drain can be painted around the odor-proof floor drain, and the kitchen sink is painted around the rice, if it is painted in all directions, the ground still needs to be painted 3 times, and the wall can be painted 60 cm. After the restaurant kitchen is waterproofed, it is best to do a closed water experiment. Since many restaurant kitchens do not have odor-proof floor drains, it is difficult to drain the water after doing the closed water experiment, so customers should communicate well with the staff to avoid water entering the large living room or bedroom soaked in the wooden floor.

Living balcony waterproof general waterproof wall turned over 30cm, if placed with a fully automatic washing machine on the whole side must be waterproof to ensure 1 meter. The living balcony is waterproof, and its datum must be clean, otherwise it is easy to puncture during the construction of the project and lose the waterproof effect. The water content is around 10%, otherwise the datum will be separated from the waterproof layer.

Backfill, cement mortar ground leveling, waterproofing, tile and other processes should be carried out one by one, and each production process should not be careless, otherwise it will be very inconvenient to return to the guild. Waterproofing needs to be painted 3 times 5 times, and the thickness of the dry solid material coated each time should be uniform, not too thick or too thin, and should be completely dry before completing the next project construction. After the painting is completed, another protective layer of cement mortar should be made on the waterproof layer of the architectural coating, and finally the floor tiles will be glued.

The most feared thing about decoration is the humid environment, so many families on the first floor are very headaches, because the first floor is really a humid environment, and no matter how good the decoration is, it will be damaged by the humidity! So how to prevent moisture in the decoration of the first floor? How can you prevent dampness?

First of all, before renovation, the whole house should be fully inspected. Repair all cracks and holes to prevent moisture. Secondly, the wall can be decorated with some moisture-proof wall cloth, and the ground can be set with a moisture-proof layer to prevent unnecessary damage caused by moisture!

How to prevent moisture in the decoration of the first floor? When decorating the first floor, in front of leveling the walls and floors, you should carefully check the house first, whether there are obvious cracks, as well as cracks and holes and other damages, if you find that you need to repair it, this can effectively prevent dampness! Secondly, all water pipes should be packaged and blocked, and balconies should not be an exception, it is best to pack them with barrier layers, which can also prevent moisture!

How to prevent moisture in the decoration of the first floor? If the wall is too wet, it will damage the entire wall, bringing a lot of unnecessary losses. Therefore, when decorating, you can choose decoration materials with good moisture-proof performance, such as ceramic tiles, waterproof wallpapers, etc.

It can be used together, for example, the living room is decorated with waterproof wallpaper, and the kitchen and bathroom balcony is decorated with ceramic tiles, so that the overall is not only beautiful and natural, but also effectively prevents moisture from harming!

How to prevent moisture in the decoration of the first floor? The setting of the vapor barrier is important! Generally, the living room will choose the Yutan floor for decoration, but the moisture-proof performance of the floor is relatively poor, if it is a humid environment like the first floor, the floor is easily damaged.

Therefore, before decoration, you can lay a moisture-proof layer to cover every corner as much as possible, and then install the floor, so that there will be no more dampness when used in the future!

The problem of how to prevent moisture in the decoration of the first floor is the above! In fact, as long as you return to the sedan car in the process of decoration, pay more attention to it, and many places can be moisture-proof treatment, which can reduce the harm of moisture!

You can get it for free

The first floor of the old house should pay attention to the decoration of the floor and wall.

1. Floor decoration.

If you want the first floor to be moisture-proof, the flooring project must be paid attention to. A lot of damp water vapor is floating up from the ground, in order to avoid the phenomenon of water vapor floating, we had better make a layer of higher flooring on the ground, which can improve the moisture-proof effect of the ground.

In addition, we can also lay a layer of high-quality floor tiles on the floor, good floor tiles are not easy to regain moisture, if it is a poor quality floor tile or a wooden floor with poor moisture-proof performance, the waterproof performance is not so good, so it is easy to get wet.

2. Wall decoration.

In addition to the floor, the walls are also very protective against moisture. We can redecorate the walls of the old house, add a waterproof layer, and then widen the walls appropriately, which can also improve the moisture-proof performance of the walls. When purchasing wall materials, it is recommended to choose moisture-proof and warm materials, which can also reduce the impact of indoor moisture.

Moisture-proof tips:

If you don't want to redecorate your house, we can also use some low-cost methods to prevent moisture.

For example, we can buy some items with dehumidification or hygroscopic effect (quicklime, dried tea, etc.) and put them in the corner of the room, so that it can absorb the moisture in the room, which is also a more effective method, but this method requires regular replacement of dehumidifying items, which is slightly more troublesome.