What to do if the paint on the wheel eyebrows of the car is off, and what to do if the paint on the

Tiny scratches – first aid products: fine wax, coarse wax.

Lightly scratched paint damage is on the surface of the topcoat and can be completely repaired by waxing. Treated with a mixture, the wiping method is a straight line wipe, and then wax, you can use coarse wax first, and then fine wax, from the inside to the outside in the same direction, so that the fine scratches are almost removed. Of course, there is a more cost-effective way to repair it with toothpaste, gently apply it to the shallow scratches, and then rub it counterclockwise with a soft cotton cloth to not only reduce the scratches, but also avoid the erosion of the air on the paint wounds.

Scratches that have not been primed – first aid products: fine wax, touch-up pens.

Slightly larger scratches can be rescued with a touch-up pen. Touch-up paint pens are sold in general auto supply stores, and car owners can buy touch-up pens of the right color by quoting their car models and official color names, which are generally priced at around 40-50 yuan. Before use, shake the paint inside the touch-up pen like nail polish.

Like the primer, you can add a certain amount of thinner to the paint pen.

In order to spray out smoothly, carefully spray the position that needs to be repaired, and wait for the touch-up pen to dry, and then apply the fine wax.

Scratches on the primer – first aid products: mark remover and rust inhibitor, self-spraying paint.

For more serious scratches, if you can see the color of the underlying primer, then you need to look at the part of the scar, the general bumper.

The rearview mirrors and wheel arches of some cars are made of engineering plastic.

It will not rust, and whether it is repaired or not depends on the requirements of the owner himself. But if these heavy scars appear on other parts of the body, then it is necessary to touch up the paint, otherwise even a small break, the steel plate will start to rust, and at that time, it will be difficult to prevent rust even if it is touch-up. The owner can wash and dry the car first, and apply rust remover to the scratches.

Wait 10 to 15 minutes to remove the rust with a tissue paper to avoid scratching and then continue to rust.

Scratch and dent treatment – first aid product: dent repair technology.

If the scratches and dents left on the surface of the car after the collision do not fall off or peel off the paint, the perfect repair effect can be achieved through the dent repair technology. A depression repair takes about 20---40 minutes, which greatly reduces the cost (about 50% of traditional sheet metal and painting) and will never deform and fade. The tools required for the repair of the depression are also not complicated, crowbars.

It is mainly used to top the steel plate recessed into it from the inside out, this technique must be delicate, little by little fine-tuning is the key, and then use a rubber hammer to smash from the outside to the inside to repair the overall shape of the work, and finally use a pencil tip like a sharp thing to highlight the convex marks of the body.

Bumper scar treatment method - first aid product: special chemical synthesis agent.

If the bumper is just lightly bruised.

It's fine, but it's ugly and scarred, and you have to find a way to fix it. Owners can repair the bumper with a special chemical synthetic, which is very simple to operate and can be repaired by anyone. The owner first peels off the burrs on the bumper, preferably with a knife, smooths the whole finish, and coats the potholes with putty to make it smooth.

Generally, there is no major deal about the paint loss of the wheel eyebrows of the car, you don't need to care, as long as it is safe, that is, as long as it meets the standard and is not broken.

The paint on the rear wheel of the car can be polished and waxed to repair the paint. If it is only a slight scratch of the car paint, you can use toothpaste to repair the scratches, if the paint is deep, you can use polishing and waxing to repair the car paint, if the paint area is large, then the only way to restore it is by touching up the paint.

The development of sedans

In the history of car development in the world, car consumption family started from the economic car, in the vast majority of developed countries.

Economy cars are the mainstream of the family car market. In today's world, energy-saving, environmentally friendly and compact economic cars are favored by consumers, and the development of economic car industry is encouraged and supported by the best countries in various countries.

Car manufacturers are also launching a variety of small cars to meet the needs of the market. In China, because of the large population, the per capita resource level is low, and at the same time, because the per capita income level of Chinese is not high, the overall consumption capacity is relatively low, to start the family car market, take the road of car consumption to the whole people, and develop the economic car industry, is a more economical and ideal direction, in line with China's national conditions.

China has developed an economic car industry since the mid-80s of the 20th century, and at some point has formed a certain scale. The economy car market is also growing, becoming the main player in China's taxi market and family car market. In 2000, new Chinese economic sedans came out one after another, and all walks of life looked forward to economic cars for a long time.

The rust part is cut and removed first, polished and polished to remove the rusty part as much as possible, and then the iron sheet is used to make the same shape of the wheel eyebrow, welded and restored, and then through a series of processes such as grinding, scraping putty, polishing, and painting. If multiple corrosions occur, the tires can be replaced with new ones.

Wheel eyebrow rust treatment method: cut and remove the rust part first, polish and polish to remove the rusty part as much as possible, and then use the iron sheet to make the same shape of the wheel eyebrow, weld and restore and then go through a series of processes such as grinding, scraping putty, polishing, and painting.

The wheel eyebrow is also the abbreviation of the automobile wheel eyebrow, which refers to the gilded bright strip on the upper edge of the tire, that is, a semicircular part of the fender protruding from the automobile tire. Its composition is 1 2 steel plates, 1 2 plastic, and the front and rear wheels are the same. The purpose of the wheel arches is mainly for decoration and the individual needs of the driver.

At the same time, the aerodynamic wheel arch also conforms to the hydrodynamics and reduces the drag coefficient. The industry generally believes that the stainless steel wheel eyebrow tires get:

1. More dazzling appearance.

2. Better cornering limit. Lost :

1. The acceleration force is reduced.

2. Comfort. In addition, the design with or without wheel eyebrows has little impact on the fuel consumption of the whole vehicle.

Now the wheel eyebrows of cars are generally plastic, and there is no such troublesome thing as rust, only the wheel eyebrows of some trucks and other large trucks are iron. The biggest disadvantage of iron wheel eyebrows is that over time, the inner side of the wheel eyebrows will rust, and the rusty wheel eyebrows will affect the appearance very much. The best way to deal with it is to find a repair shop that can simply repair and polish.

Photo by Q&A) Model Y Model 3 Model X AION V Ideal One Xpeng P7 @2019

If the wheel eyebrow of the car is rotten, it is recommended to go to the repair shop to replace it:

1. The composition of the automobile wheel eyebrow is 1 2 steel plate, 1 2 plastic material, and the front and rear wheels are the same;

2. Most people call it the eyebrows of the wheel, so they are called the wheel eyebrows! The role of the wheel eyebrow is mainly to equip the hall potato for the decorative role and the individual needs of the driver, and at the same time, for the aerodynamic wheel eyebrow, it also conforms to the fluid dynamics and reduces the drag coefficient;

3. The industry generally believes that the reputation of changing stainless steel wheel eyebrow tires has been changed: a more dazzling appearance; The better the corners are lost at the limit; Reduced acceleration; Comfort. In addition, the design with or without wheel eyebrows has little impact on the fuel consumption of the whole vehicle.

How to deal with rusty car wheel eyebrows:

1. Remove the rust first, then flatten the wheel eyebrows, and spray the paint;

2. Now there are many cars that are actually no longer made of iron, and plastic, so there is no such thing as rust, and the plastic should be repaired in time if it is broken;

3. If the wheel eyebrow is particularly rusty, it is recommended to replace the wheel eyebrow;

4. If you want the wheel eyebrows of the car not to rust or rust slowly, it is recommended to maintain your car more often;

5. More maintenance can prolong the life of the car and the wheel eyebrow.

Car wheel eyebrow scratch repair method: 1. The easiest way is that we can design and create or buy repair stickers to cover the scratched wheel eyebrows, which is the most cost-effective way;

2. We can also buy this kind of general car carbon fiber pattern general wheel eyebrow online, paste it on the wheel eyebrow, which can not only cover the scratches but also play a protective role;

3. Matte plastic parts (such as wheel fighting rubber eyebrows, front and rear bumpers, etc.) can be used, and the corresponding capacity of repair solution can be purchased according to the scratch range, generally about 150ml-200ml repair solution can be repaired in the range of 1-2 sheets of A4 paper size, and more than 400ml is suitable for repairing a wide range of scratches;

4. Clean the part that needs to be repaired, you can scrub it with water or alcohol, and polish it with sandpaper after the water is dry, the number of sandpaper is determined by the depth of the scratches, and the deeper the scratches, the smaller the number of sandpaper meshes (generally 800 mesh or 2000 mesh, 800 mesh sandpaper is thicker);

5. There are a lot of scratches that are very serious, it is best to replace them with a new one, we can buy wheel eyebrows online or go to the local auto parts city to buy normal wheel eyebrows that match our models, and then drive to the repair shop to ask the master to replace.

Millions of car purchase dust grasp subsidy.

Car wheel eyebrow scratch repair method: 1. The easiest way is that we can design and create or buy repair stickers to cover the scratched wheel eyebrows, which is the most cost-effective way; 2. We can also buy this kind of general car carbon fiber pattern general wheel eyebrow online, paste it on the wheel eyebrow, which can not only cover the scratches but also play a protective role; 3. Matte plastic parts (such as wheel eyebrows, front and rear bumpers, etc.) can be used, and the corresponding capacity of repair solution can be purchased according to the scratch range, generally about 150ml-200ml repair solution can be repaired in the range of 1-2 sheets of A4 paper size, and more than 400ml is suitable for repairing a wide range of scratches; 4. Clean the part that needs to be repaired, you can scrub it with water or alcohol, and polish it with sandpaper after the water is dry, the number of sandpaper is determined by the depth of the scratches, and the deeper the scratches, the smaller the number of sandpaper meshes (generally 800 mesh or 2000 mesh, 800 mesh sandpaper is thicker); 5. There are a lot of scratches that are very serious, it is best to replace them with a new one, we can buy wheel eyebrows online or go to the local auto parts city to buy normal wheel eyebrows that match our models, and then drive to the repair shop to ask the master to replace.