There are two holes in the corners of the trunk lid of the car, how to fix it?

Updated on Car 2024-07-11
18 answers
  1. Anonymous users2024-02-12

    Sheet metal shaping repair method: 1. Manual repair, the back of the sheet metal parts can be touched. 2. Repair machine repair.

    It is recommended to go to the repair shop for maintenance according to the actual situation.

  2. Anonymous users2024-02-11

    If it is a large area of damage, it needs to be replaced with a new one, if the damage is not large or the damage is not serious, and there is no need to replace the new trunk, go directly to the repair shop to do a sheet metal paint.

    There are many factors that affect whether the trunk lid is repaired or replaced. Generally, insurance companies also insist that they can be repaired but not replaced. In order to reduce economic losses, it is recommended to paint sheet metal, and whether it is sheet metal repair or replacement, it needs to be repainted, and there will be color difference, but it is obviously not an obvious problem.

    Trunk introduction.

    The trunk is an indispensable function for the current car, we are not only convenient to hold the things we need daily, but also can put some clothes and necessary items when going out to play, at this time many people put all the things in the trunk, some kinds of things try not to put in the trunk.

    However, the use of the trunk should pay attention to the greater the weight of the items on the car, the greater the fuel consumption of the car, that is to say, when there are more and more things in the trunk, the fuel consumption will also increase, that is to say, after the weight increases, it will drive up the inertia will be more and more, at this time once it encounters a rear-end collision, it will increase its severity.

  3. Anonymous users2024-02-10

    Your this is not serious, the paint surface is not damaged, it is recommended to do dent repairIf the replacement has a greater impact on the second-hand retention rate, the replacement needs to be disassembled, and you can judge whether to replace and disassemble by looking at the screws, the original paint and accessories are very precious, and must not be replaced.

    Introduction to the car dent repair is based on the principles of optics, physics and mechanics, using the principle of lever to reduce the size and depth of the car due to various external reasons, provided that the body paint is not damaged, the metal surface is not too stretched, is a modern process.

    Automobile dent repair technology is an international advanced technology for the repair of various parts of the car appearance, due to the impact of external forces to form various depressions for repair, the technology also greatly shortens the repair time (a depression repair takes about 20---40 minutes), and greatly reduces the cost (only about 50% of the traditional sheet metal and painting).

  4. Anonymous users2024-02-09

    This kind of suggestion to replace the trunk cover, this kind of pit is deeper, the sheet metal to get out of the putty is thicker, so that the weather is hot putty can not be left for a few years will crack, this more serious pit is recommended to replace, although the cost of sheet metal maintenance is low but the weather resistance is not long, there is no replacement of the overall cover cost-effective.

  5. Anonymous users2024-02-08

    The lower right corner of the trunk of the car is deformed, if the deformation is not large, it is better to repair, and the cost is lower than the replacement, and it does not affect the appearance of the vehicle after restoration.

  6. Anonymous users2024-02-07

    If it's insurance, it's recommended that you change it, and the money that should be changed is the same as your rest money, in fact, it should be about the same, after all, repaired, can he be artificial? Not so small flat, your car is also newly bought, and I personally recommend that you still replace it.

  7. Anonymous users2024-02-06

    Your trunk is not light, I suggest you should change it to a new one, this repair will cost a lot of money, it is better to change.

  8. Anonymous users2024-02-05

    Hello, depending on the situation, the damage is so serious, it is recommended to replace it. Hope.

  9. Anonymous users2024-02-04

    If the body is dented and the paint is off, it is recommended to paint the sheet metal.

    About 300 to 500, but if you don't have paint off and care about the original car paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, is based on optics, mechanics, the use of lever principle.

    Slowly restore the pits of different depths to the original appearance, look at the following picture and you can see it at a glance.

    The specific size of your depression can be determined, similar to the picture in the picture, generally about 300 yuan can be done.

    <> the picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the repaired body, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I suggest that you still go to the regular brand store to repair, so that the technical level will be *** and** fixed, unlike small shops that will only shout prices all over the sky.

  10. Anonymous users2024-02-03

    Hello dear! It depends on the degree and area of the recess, and the sheet metal and paint repair will cost about 200-500 yuan! I hope it can help you, please set it as! Thank you!

  11. Anonymous users2024-02-02

    Looking at the picture, I can only see that it is not too hurt 7, which is treated in the repair shop with a suction cup, without sheet metal, and the wax after sucking it out, at most 300 400 will be done, a small problem.

  12. Anonymous users2024-02-01

    If the dent is serious, you can only replace the trunk, and the specific ** depends on the model. Hope mine can help you.

  13. Anonymous users2024-01-31

    Dear hail, the trunk is generally required to be repaired, and the cost ranges from about 1,000 to 3,000 yuan, and the specific cost depends on the following factors:1The degree of convexity and convexity.

    If the depression is large and the layered glue is more damaged, the cost will be higher. If it is only partially protruding and the damage is small, the cost is relatively low. 2.

    The extent of damage to the chassis. If the force of the collision is enough to displace or misalign the entire underbody structure, additional repairs to the relevant structures are required, and the cost will be much higher. If only the shell is damaged, the cost impact is small.

    3.Type of vehicle. The larger the vehicle and the more complex the housing structure, the higher the repair cost.

    Compact trolleys are less expensive to repair. 4.Use of materials.

    If you need to replace large items such as the warehouse door leather plate, the tail source of the lead cover, and the sound-absorbing pad, the cost will be higher. The cost of repairing with simple fillers, adhesives, etc., will be lower. 5.

    Operating costs. Different repair shops have different service quality and operating costs, which will directly affect **. The repair cost of regular brand 4S shops is higher, while local small and medium-sized repair shops are usually lower.

    To sum up, the trunk repair cost of 1,000-3,000 yuan is a typical range.

  14. Anonymous users2024-01-30

    Summary. Hello, dear, the trunk hit the recess and generally repaired **600 yuan. Sheet metal repair is required.

    Sheet metal painting is a kind of car repair technology, that is, the deformed part of the metal shell of the car is repaired, such as the body shell is hit by a pit, you can restore it to its original state through sheet metal, and then through spraying special paint, the deformed metal surface of the car is restored to the same as other intact places, as bright as ever. <>

    <> how much does it cost to repair the trunk into a dent.

    Hello, dear, the trunk crashed into the general repair **600 yuan nuclear Bifan. Sheet metal repair is required. Huipei sheet metal painting is a kind of car repair technology, that is, the deformed part of the metal shell of the car is repaired, such as the body shell is hit by a pit, you can restore it to its original state through sheet metal, and then through spraying special paint, the deformed metal surface of the car is restored to the same as other intact places, as bright as ever.

    <>I'd like to ask how much it will cost to fix this situation.

    Kiss, the trunk maintenance method is as follows: 1. If the pile part of the trunk is dirty to be cleaned, the correct method is to use multi-functional foam, and you can also use a brush to clean the dirt. 2. Also pay attention to the edge of the trunk and the sink.

    In addition, during the cleaning process, it is also necessary to pay attention to cleaning the dirt on the edge of the trunk and the sink. After washing, the odor treatment is carried out again. <>

    <> kiss, let you wait for a long time, our repair of this situation is about 600 yuan. <>

    <> kiss, that is, repaired with sheet metal, ** at 600 yuan. <>

    <> how much will be repaired this time later?

    Dear, I saw the **I saw the ** you sent, this Wuling trunk cover repair ** at 400 yuan. <>

    <> kiss, this later repair is about 400 yuan. <>

    <> hit the front once, hit the back once, 2 times, regardless of the front one, how much is the light behind this time.

    Dear, light behind this maintenance ** at 400 yuan. <>

  15. Anonymous users2024-01-29

    Summary. The cost of repairing a trunk indentation will vary depending on the size and area of the indentation, the model and brand of the vehicle, and there is currently no uniform repair**. For example, the same model of vehicle, the dent part is different, the size is different, and the cost is different, but no matter what kind of car it is, the maintenance fee after the dent will not be less than 200 yuan, which is still under the premise of not painting.

    When the value of the vehicle is high, the maintenance** will also increase. 1. The trunk is not very concave, and only a small amount of depression can be seen with the naked eye, so it is relatively simple to repair, and only a simple repair is required, and the maintenance cost is low.

    The cost of repairing a trunk indentation will vary depending on the size and area of the indentation, the model and brand of the vehicle, and there is currently no uniform repair**. For example, the same model of vehicle, the dent is different, the size is different, and the cost is different, but no matter what kind of car, the maintenance fee after the depression will not be less than 200 yuan, which is still under the premise of not painting. When the value of the vehicle is high, the maintenance** will also increase.

    1. The trunk is not concave to a large extent, and only a small amount of depression can be seen with the naked eye, so the maintenance is relatively simple, and only a simple repair is required, and the maintenance cost is low.

    Generally, this is done in the repair shop with suction cups, without sheet metal, and the wax after sucking out is up to 300 400, a small problem.

    If the trunk crash is not particularly serious, the depression does not hurt the paint, you can choose the dent without trace repair technology, and the ordinary 2-3cm dent repair cost is within 500 yuan. However, the trunk is particularly seriously dented, and either the pin is painted in sheet metal, or the trunk is completely replaced. Sheet metal painting is more expensive than dent repair because of the additional step of repairing the car paint.

    Trunk replacement** is relatively high, and the specific ** depends on the basic basis of the vehicle.

  16. Anonymous users2024-01-28

    If the body is dented.

    If you paint it, it is recommended to paint sheet metal, about 300 to 500 or so, but if you don't have paint off and you are very concerned about the original car paint, you can try the paint-free car dent repair technology, you don't need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the lever principle is used to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

    <> the picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the repaired body, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I suggest that you still go to the regular brand store to repair, so that the technical level will be *** and** fixed, unlike small shops that will only shout prices all over the sky.

  17. Anonymous users2024-01-27

    It can be repaired without damaging the paint.

  18. Anonymous users2024-01-26

    It's not very serious, and it's okay to spray paint.

Related questions
8 answers2024-07-11

The electric switch of the trunk of the car is in three positions: the key of the tailgate of the vehicle, the key of the tailgate of the instrument panel, and the inductive opening and closing of the trunk. >>>More

5 answers2024-07-11

The iron sheet of the trunk of the car is sprayed with anti-rust paint like other parts, as long as you don't damage yourself, you can prevent rust, and if there is damage, you should spray or brush anti-rust paint there.

21 answers2024-07-11

It must be an air pump, if one day you are unlucky and have a flat tire on the road, and the car has not been repaired within a radius of several kilometers, then there is a pump to help.

15 answers2024-07-11

If the trunk of the car is sprinkled with gasoline, you can take out the trunk mat first, do a surface foam cleaning first, and use the washing spirit. >>>More

18 answers2024-07-11

If the body is dented and the paint is off, it is recommended to paint the sheet metal. >>>More