Why is it not recommended to repair the side skirt depression?

The cost of repairing the side skirts is too high, whether the side skirts are repaired under the door or not is not a big problem, and even if they are repaired, they are not as flawless as the originalIn the face of such a problem, the first thing to determine is what the material of the side skirt is made of, whether it is plastic, metal, or aluminum alloy.

If it is made of plastic, it is still easier to deal with, and the general depression is poured with hot water to try to make it bulge, after all, plastic products have a certain shrinkage, if it does not work, you can use some professional adsorption tools to pull, and then make up some paint.

Precautions for repairing side skirt depressions.

First of all, the side skirt itself is a place that is more susceptible to friction, and many repair shops do not spray the side skirt with rubber particles after sheet metal, so the side skirt is easy to be damagedAfter the vehicle is sheet metal, if the repair is not professional enough, the surface is easy to appear uneven, and cracks will occur after a long time

In addition, the original anti-rust layer in the sheet metal rear skirt has been damaged, and it is easy to rust from the inside to the outside in the future, but this can be solved by repairing the small holes and spraying anti-rust wax by yourself.

Summary. This price is still a little more expensive for this maintenance, because this is very troublesome, and you need to shape this position flat, and then. After the depression is shaped and flattened, it is then necessary to re-polish it, and then it is painted in this spray treatment.

If this repair, if it is in an outside repair shop, it will cost at least about five or six hundred yuan in man-hours, including material costs. If you go to the 4S shop for maintenance, this price is still relatively expensive, and you need to bring one for seven or eight hundred yuan. So this is still more troublesome.

The price is still relatively expensive, and this repair will take at least two or three days, because this needs to be painted.

Hello, don't click on the end, I'm textual to give you the full answer, 2-3 minutes.

How much does such a fix cost.

This price is still a little more expensive for this maintenance, because this is very troublesome, and you need to shape this position flat, and then. After the depression is shaped and flattened, it is then necessary to re-polish it, and then it is painted in this spray treatment. If this repair, this repair shop outside the rubber pie, it will require at least about five or six hundred yuan in man-hours, including material costs.

If you go to the 4S shop for maintenance, this price is still relatively expensive, and you need to bring seven or eight hundred yuan for rent. So this is still more troublesome. The price is still relatively expensive, and it will take at least two or three days for this repair, because this needs to be painted.

See.

needed, affecting the senses.

You can handle it yourself, and it takes about 300 yuan to repair.

Materials needed: detergent, suction cups, reciprocats, vinyl, rags.

1. Use detergent to treat the area around the depression first to keep the paint clean.

2. After that, wipe the detergent with a rag, and you need to wipe it repeatedly.

3. Apply vinyl to the suction cup to increase the suction power of the suction cup.

4. Aim the suction cup at the depression and leave it for a while.

5. After the suction cup is firm, use Qizi to grasp the suction cup, pull it upward, and use the power of lifting to repair the depression.

6. After that, clean up the vinyl in the depression and successfully repair the depression.

Did you fix it? I also found out today that my side skirt didn't know which road I was on, but it wasn't as serious as you, the paint didn't fall off, it was recessed, and I couldn't see it on the side of the door, and it was obvious from a distance. Is there a traceless repair now?

Don't go to the sheet metal painting, it is not the original car paint after repair, you will regret it after a long time.

You don't have to go, it's just not pretty.

The most direct and traditional method is to use thermal expansion and contraction, directly splash hot water to heat the injured and dented parts of the car, and then press them with your hands or with a pry bar to push out the dent little by little to achieve the effect of repair.

2. The same is the use of the principle of thermal expansion and contraction, you can choose to use the hair dryer to heat, so that the efficiency is higher, at this time, you can cooperate with two people, while heating, while squeezing, speed up the repair of the car time, if the car depression is relatively large, you can appropriately increase the number and temperature of the hair dryer, increase the heat transfer, and then, press internally to help recovery.

Mine is the same as yours, not as serious as yours, change the spare tire friend to help get the jack, now there is no rest, I don't want to sheet metal, I am ready to hammer it in, may I ask the landlord to repair it?

See if you can fix it yourself, or you can fix it, jack top.

Recently, many customers are in a strong response to the side skirt depression why not propose to repair, in which there are a variety of opinions, a more extensive expression will be: the side skirt repair cost is too high, the side skirt under the car door repair is not a big problem, even if the repair can not be as flawless as before, etc., the first step to deal with this situation is to distinguish which of the raw materials of the side skirt, is plastic, metal materials, or aluminum alloy profiles.

If it is a plastic material, or it is easier to solve, the general depression pouring boiling water try to make it convex on the line, after all, the plastic products have a certain degree of convergence, if it is not good, you can use some professional tomato suction special tools to carry out pulling, and then make up some paint on it.

If it is a metal material, it is very troublesome, the metal material is generally coated with a layer of fine particles, the general depression can be pulled out according to the meson, and the more serious trace must go to the automobile only imitation repair factory to do professional repair, if it is an aluminum alloy profile material, it is generally impossible to repair, it must be replaced, and the cost is very high in it, and it is not very prominent and not perfectionism can not be repaired, after all, the harm to motor vehicles is not great.

Similarly, due to the depression, many consumers also regret the side skirt sheet metal, the first side skirt itself is also very easy to suffer from friction area, many auto repair factories have sprayed the side skirt after the sheet metal, so the side skirt is very easy to finger fiber damage; After the car has been sheet metal, if the repair is not technical expertise, the surface layer is very prone to unevenness, and it will continue to cause cracking after a long time; There is also the original anti-rust treatment layer on the inside of the sheet metal back skirt that has been damaged, and it is very easy to cause rust from the inside out in the future, but this can be treated with the help of repairing small round holes and spraying anti-rust wax independently.

Millions of car purchase subsidies.

Abstract pro, good afternoon, the car side skirt depression depends on what material it is, most of them can be repaired. The repair of the side skirt has a lot to do with the side skirt material used in the body, if it is a plastic material, it is best to repair, you can use a small hammer to wrap a towel carefully to knock it to recover. If it is iron metal, you have to go to the repair shop to do sheet metal painting.

If it is an aluminum alloy material, it generally cannot be repaired and replaced.

Can the dent in the side skirt of the car still be repaired?

Dear, hello, I am a vehicle problem consultant car busy man, I have seen the problem you consulted, please wait patiently for about five minutes, and reply to you immediately, thank you! 

Dear, good afternoon, the dent of the side skirt of the car depends on what material it is, most of them can be repaired. The repair of the side skirt has a lot to do with the side skirt material used in the body, if it is a plastic material, it is best to repair, you can use a small hammer to wrap a towel carefully to knock it to recover. If it is iron metal, you have to go to the repair shop to do sheet metal painting.

If it is an aluminum alloy material, it generally cannot be repaired and replaced.

Hope mine is helpful to you, thanks!