How to repair the wheel eyebrow? What are some tips?

Nowadays, many people are very careless when using their own cars, either the internal parts of the car are broken, or there are scratches on the appearance. The most common occurrence is that the wheel arch at the tire is indented, and the most of the depression is caused by the car being bumped. But there are also a lot of repair skills, you can go directly to the place where the car is repaired and let the car repairer repair it.

And after repairing, it will be like new, and there will be no color difference. So how do these mechanics repair wheel eyebrows? Are there any tips for trimming the eyebrows?

How to fix the wheel eyebrow? Before repairing the wheel eyebrow, it is necessary to prepare the repair tools, such as a light, a repair hammer, and a special leveling pen, in fact, only these things are needed to repair the sunken wheel eyebrow. But the most important thing in repairing a car is not the tools, the most important thing is the skill of the mechanic and the degree of care.

Take advantage of the refraction of light when repairing.

to accurately determine the position of the wheel eyebrow depression and the degree of depression. Then use the principle of leverage.

Go to the "**" inside the massage car, and release the tension in the depression little by little. <>

Are there any tips for trimming wheel eyebrows? In fact, the easiest thing is to take a crowbar.

To push the depression from the inside out, but everyone should be careful to push the depression little by little when pushing it. Do not use too much force, otherwise it will cause some damage to the body. And also use a rubber hammer to knock out the depression from the inside, repair the overall shape of the wheel eyebrow, and finally use a leveling pen to fine-tune some of the depressions.

When all is finished, the eyebrows will return to their previous appearance, exactly like the original paint. <>

Everyone must be very careful when driving, and the current car accident rate is still very high, so everyone must be careful when driving, and any scratches will also make the contradiction between the two inextricable. Not only between cars, but also when driving, be careful not to hit or rub against stone stakes. Otherwise, it is easy to cause dents, or even paint scraped off.

After such a situation, everyone must be very distressed.

We can also buy such a set of dent repair tools online, which is not expensive, and you can have it for dozens of dollars. First, clean the sunken parts, then load the special glue into the glue gun, plug in the power supply and preheat for about 7 minutes; Then select the appropriate gasket, pay attention to the large depression with a large gasket, the larger the gasket, the greater the traction, and then use the glue gun to evenly coat the gasket with sol, quickly paste into the depression position, and gently press until the special glue is fixed and then let go; After that, align the hole in the middle of the towing bridge with the gasket after fastening, put the nut into the gasket screw bar and tighten it, and then tighten the nut until it is pulled to the recess and level. After the repair is completed, the tool is removed, and then the alcohol is sprayed on the body residue, and finally cleaned with a scraper.

You can go to some professional institutions for restoration. The trick to repair the wheel eyebrows is to use an eyebrow razor to trim off all the excess eyebrows, or you can repair them by thrush, or you can go to a beauty salon for eyebrow tattooing, or you can go to a beauty salon for professional repair, or you can shave off all the eyebrows, and then re-paint or tattoo your eyebrows, which are all good tips.

At this time, it is necessary to prepare the corresponding tools, and then for the construction of the sunken place, and then to massage the body, release the sunken place, and then restore the original state, and at this time you can also use some small hammers, and you must face the light to repair, and wait until there is no flaw after the end.

If it is a slight scratch, it can be solved by waxing at this time. If it is a deep scratch, you can use a refill spray pen to touch up the paint at this time, spray it evenly at this time, and then apply it to the scratch to promote sun drying. If it is too serious, you should go to the 4S store to repair it at this time.

Dedge repair is an automobile pit repair technology on the basis of not destroying the original paint, and there are two forms of treatment:

One is the manual treatment, I heard that it is disassembled with a special hook to pry out, pry out the pit, and then use a rubber hammer to knock back, with light to level, such treatment is basically no damage to the car paint, but the edge and the ribbed place can not be treated;

The second is the treatment of the machine, using the machine to suck out the concave part, and then use a rubber hammer to knock back, and the tendon part can basically be repaired.

Circumstances that cannot be repaired:

Some special dents cannot be repaired by removing the door trim panels, or the recess area is too large, then the doors need to be dismantled, and the doors need to be removed.

It is necessary to apply adhesive tape to the edge of the door and the edge of the fender in front of the door (to prevent the paint of the door and fender from being scratched when separating the door), and then remove the screws of the door anklet and wrap the anklet with a towel (mainly to prevent the door from shaking back and forth and scratching the paint).

There is no dead fold depression to the regular sheet metal paint shop for viscose suction repair, ** low repair fast, it is recommended to repair in time to avoid losing metal elasticity. Such as satisfied.

Wheel eyebrow depression repair method: use the ball head of the fitter's hammer head to force against the protrusion on the inner surface of the wheel eyebrow, and the paint surface corresponding to the depression position you use the hardwood plane soft cloth to align, and then hit the wood with a hammer until the depression at the wheel eyebrow is ** out.

The wheel eyebrow is also the abbreviation of the automobile wheel eyebrow, which refers to the gilded bright strip on the upper edge of the tire, that is, a semicircular part of the fender protruding from the automobile tire. Its composition is 1 2 steel plates, 1 2 plastic, and the front and rear wheels are the same. Most people call it the eyebrows of the wheel, so they are called the wheel eyebrows!

The purpose of the wheel arches is mainly for decoration and the individual needs of the driver. At the same time, the aerodynamic wheel arch also conforms to the hydrodynamics and reduces the drag coefficient. The industry generally believes that the stainless steel wheel eyebrow tires get:

1. More dazzling appearance 2. Better cornering limit. Lost: 1. Reduced acceleration 2. Comfort.

In addition, the design with or without wheel eyebrows has little impact on the fuel consumption of the whole vehicle.

Photo by Zhu Zhenchang) 2019