When decorating, the wall is not very flat, can it be leveled directly with gypsum board?

Generally, due to the error of wall flatness, the wall is leveled in order to obtain a relatively flat wall surface and a good wall decoration effect. The more commonly used is cement mortar.

The wall is leveled, and the level is used first.

Carry out wall detection, measure the size of the error, position the elastic line, determine the leveling thickness, and the construction plan.

Then the construction takes place. Or the surface of the paper, not suitable for bonding heavy objects, easy to fall. In one is drywall.

Afraid of water, easy to expand and deform when exposed to water, for the later stage of the wall water-based paint decoration, the secret project is to use the best materials and the best labor to perfect it. And those good-looking face projects don't need to be so sculpted. In fact, decoration and human life engineering are the same thing, so if you put tiles on it, it will not be firmly pasted.

If it is hard-pasted, it will cause the tile to crack and fall off.

<> just plaster, put the bricks, knock twice on the bricks and you're done. Actually, no, don't look at it as simple, it takes about two or three years for novices to learn the art of wall building. Many people's fingers are worn out in less than two days (it is a little stronger to take dry bricks, especially those who have been drenched in water, and many people do not know how to wear out their fingers in half a day).

Because the master builds the wall, generally does not use a trowel to knock the bricks, all are pressed by hand, and the novice has no strength in his hands, and he does not know how to pick bricks, it is difficult to put the bricks when he puts them, it is very normal for novices, this is the difference between the master and the apprentice, the general master has several years of wall commemoration, and the novice has just entered the road, so in the case of no experience, I want to immediately build the wall flat and neat, the effect is the foresight that can be imagined, the bricks and bricks are basically not in a line, not to mention parallel, beautiful. Horizontal alignment. Novices will be able to lay it flat.

The excess mortar ash on the wall is pasted on the wooden square, scraped down once, the wooden square will weigh 20 30 pounds, and the mortar plaster pasted on the wooden square will be shoveled off with a plastering board.

After the cement ash is dry, paint it one by one. The wood square and the aluminum alloy side can be directly tested on these good cement strips, and scraped back and forth.

When decorating, you can directly use gypsum board to do wall leveling, but you should choose according to the size of the wall flatness error and decoration: generally speaking, the wall is made of putty, latex paint, wallpaper, and directly leveled with gypsum board, which is convenient for construction, and the putty is directly scraped after leveling, and the construction speed is relatively fast. If you use cement mortar for leveling, then use gypsum for leveling, and then do putty construction slowly.

However, the wall is ready to be tiled, or the decorative board with heavy bonding weight is not suitable for leveling with gypsum board, because the surface of gypsum board is putty, or the surface of the paper is not suitable for bonding heavy objects and is easy to fall. In addition, gypsum board is afraid of water, and it is easy to expand and deform when exposed to water, which is not suitable for the decoration of the wall with water-based paint in the later stage, or in the space with particularly large water vapor.

Yes, because the plaster line mainly plays a beautifying role. So the effect of the gypsum line is still very powerful.

It can be leveled with gypsum board, which can be found in horizontal lines on the decoration wall, and gypsum board is also very easy to use.

Hello, yes 1. Usually, the unevenness of the roof is 1-2 cm, which is normal, but the difference is more than 3 cm, and special treatment is required. 2. Under normal circumstances, you can shovel off the original wall and level it with a gypsum board ceiling. 3. First, take a look at the structure of the building.

If the building is insufficient, the roof is uneven or has a slight slope. 4. Then look at the slope, if the slope is less than 2 cm, you can use plaster and putty to level it. 5. If the gypsum board greater than 3 cm is suspended or covered by the modeling roof, and the flat roof is slightly unnoticed, it will appear wavy, sinking in the middle or uneven flat roof.

I hope my reply can help you, if you have any follow-up questions, please feel free to ask me, I will reply to your <> as soon as possible

<> the top surface of the living room is not very flat when decorating, can it be leveled directly with gypsum board?

Hello, yes 1. Usually, the unevenness of the roof is 1-2 cm, which is normal, but the difference is more than 3 cm, and special treatment is required. 2. Under normal circumstances, you can shovel off the original wall and level it with a gypsum board ceiling. 3. First, take a look at the structure of the building.

If the building is insufficient, the roof is uneven or has a slight slope. 4. Look at the slope, if the slope is less than 2 cm, you can use plaster and putty to level it. 5. If the gypsum board larger than 3 cm is suspended or covered by the modeling roof, and the flat roof attack bureau is not paid attention to, it will be out of the auction to make the current wavy, sinking in the middle or uneven flat roof.

I hope my reply can help you, if you have any follow-up questions, please feel free to ask me, I will reply to your <> as soon as possible

<> the top of the living room is uneven, I see that the painter used drywall and wall mud to level it, is this okay?

Please take a look at my second question.

Good kiss. The uneven roof of the living room can be solved by the following methods: 1. Leveling with putty, first shovel out the uneven place of the surface buried surface, and then use putty to smooth the entire top; 2. Paint plaster, if the leveling error is relatively small, you can use plaster to smooth the top; 3. Gypsum board, for uneven now macro ants and elephants are more serious, can only use gypsum board for paving.

Hello! I have 20 years of home improvement experience, I have never seen gypsumboard to make up for the damaged wall, gypsum board is generally used on a small area of partitions, and the firmness is not good, a little force will be broken. It is not recommended that you use, the decoration company I guess it is fooling you, because the use of gypsum board ** is cheap and simple to construct, but the surface effect is good, so it is recommended like this, please don't decide easily.

It is recommended that you shovel the withered wall and repair it with cement mortar, and it is good to have good firmness and low cost. After repairing, according to the general decoration procedures, the wall can be scraped with latex paint.

It doesn't cost to shovel all and then redo it, and the contractor is about 17 yuan square meters (cement.

Sand 107 glue.

Large white powder latex paint.

Labor cost) wall gypsum board leveling construction technology: first on the wall according to the specifications of 10 eyes, with clogs plugged and then with the specification of 400x2x4 wood nailed, the distance between the wood is 20x20 is better, wood and wood should be straight.

Flat, can not use the height phenomenon, according to the gypsum board specifications of the joints should be added wood, and then you can seal the gypsum board, it is recommended to use 3x25 drywall nails to reinforce, nail spacing of 20 cm is better.

Between the boards, it should be repaired with cross tape paper mixed with latex and then scraped white, and the nail holes should be treated with anti-rust paint.

It is best to remove the original plastering layer and level it with cement mortar, and it is worth spending more money on your own family, as long as it is not unjustly spent. Besides, it saves a lot of space than using gypsum board to lay a layer on the original wall, and it is not easy to crack, and the current housing price is very expensive, and the space saved is money, which is relatively worth it. There is also a way, first remove the original batch of white putty powder (the original plastering layer must be removed to avoid the new plastering is not firmly bonded and easy to hollow), and then fix a layer of steel wire mesh on the wall, and finally plaster with cement mortar, if the original wall flatness is good, the plastering layer is generally not greater than 2cm.

The second type, caulking gypsum, is suitable for places with poor flatness, high bonding strength, not easy to hollow, no cracking, and can be quickly constructed.

The second type, repaired with stucco gypsum, has the characteristics of strong adhesion, early strength and quick hardening, fire insulation and heat preservation, small shrinkage, no cracking, etc., and the disadvantages are long delamination and cracking, and the wall skin will even fall off. (Contractor Foreman Acceptance Method).

The wall will generally have the phenomenon of unevenness, but the error of three centimeters is too big, the treatment method: find a good level, pay off, use the woodworking board to level the point, the lowest point to hit the wood plug under the eye, the keel is determined in a plane, and then the keel is brushed with white latex, the keel gap is full of styrofoam, fix the gypsum board with self-tapping, and then use the plaster plaster to level it.

Hope it helps, dear

Look at what is the reason for the aging of the wall.

If it is water seepage, it should be waterproofed on the wall first, and it cannot be treated directly with wooden strips and gypsum board, which will not last long. If it is not the cause of water seepage, the original cement is peeled off and redone with high-grade cement mortar.

Without this practice, the wall should be leveled with plaster. (Is it written an extra board word), process: first find out the uneven place, use 805 glue + gypsum to make a thin mud, put it on the gray knife, hang flat.

Under normal circumstances, you don't need to use gypsum board for leveling? Why use plasterboard for leveling? Shovel out the original decoration materials, and then re-plaster to level. Gypsum board leveling increases the cost, and reduces the area of the house, and the gypsum board will also crack!

It's very simple, carpentry will do.

First, fix the wooden square flat on the wall and put it on the plasterboard. The plasterboard can be scraped white.

Summary. When decorating, the wall is not very flat, can it be leveled directly with gypsum board? Kiss! Hello, happy to answer your <>

The construction project that is often done when decorating the wall is generally carried out due to the error of wall flatness, in order to obtain a relatively flat wall and a good wall decoration effect. The more commonly used are cement mortar wall leveling, gypsum wall leveling, gypsum board wall leveling, wood board wall leveling, according to the wall situation, decoration process to choose. Wall Error:

Generally, our residence, the floor height is about 3 meters, the flatness error of the wall is required to be within 8 mm, the masonry clear water wall is required to be within 5 mm, and the wall verticality error is less than 5 mm. The error of wall cement mortar plastering is within 4 mm, the batch scraping putty is within 2 mm, usually the wall is 2 meters square, and the flatness error within 2 mm is difficult to find. Hope mine can help you <>

Do you have any other questions?

When decorating, the wall is not very flat, can it be leveled directly with gypsum board?

When decorating, the wall is not very flat, can it be leveled directly with gypsum board? Kiss! Hello, happy to answer your <>

The construction project that is often done when decorating the wall is usually carried out due to the flatness error of the wall, in order to obtain a relatively flat wall and a good wall decoration effect. The more commonly used is cement mortar wall leveling, gypsum wall leveling, gypsum board wall leveling, wood board wall leveling, according to the wall situation, decoration process to choose. Wall Error:

Generally, our residences are about 3 meters high, the flatness error of the wall is required to be within 8 mm, the masonry clear water wall is required to be within 5 mm, and the wall verticality error is less than 5 mm. The error of wall cement mortar plastering is within 4 mm, the batch scraping putty is within 2 mm, usually the wall is 2 meters square, and the flatness error within 2 mm is difficult to find. Hope mine can help you <>

Do you have any other questions?

I would like to ask, can the uneven top of the living room be leveled with gypsum board and wall mud.

Will it crack in the later stage.

Yes, it won't crack.

Wall leveling is a masonry technique. Many owners are semi-decorated professionals who are not familiar with the level of wall decoration and necessary materials. Let's seeWhat materials are used to level the wall with gypsum boardIt's better.

1.Caulking gypsum is mainly made of fine gypsum powder, gypsum board and nail hole caulking. 2.

plaster, plaster and selected fine sand. composition, for thickening plaster at the bottom of the wall 3When the mortar is repaired, the wall decoration must be basically flatDecorative walls are leveled with gypsum boardIt has good adhesion, water resistance and crack resistance are very good.

Gypsum putty is mainly made of fine gypsum powder, and putty is filled between the drywall and the nails. It is also suitable for repairing walls, holes, trunking, and partially flat holes.

Caulking plaster is characterized by rigidity, flame retardant and can automatically adjust the chain opening at room temperature and sound insulation conditions. At the same time, the structure is simple, the adhesion is strong, and it will not break or crack.

Most people in the caulking plaster market prefer to use it to flatten walls. Decorative walls are leveled with gypsum boardIt is easy to construct, simple to operate, and inexpensive.

2.To thicken the plaster wall, choose plaster, plaster and fine sand. It has no adhesion, fire and insulation ear grinding, cracks, etc. It is used to flatten the material of the other walls of the room.

When pouring concrete, the plaster is flattened directly, because the walls of the new house are slightly different.

3.Repair the flatness of the mortar. By default, the decoration on the walls should be flat. Leveling repair mortar has excellent adhesion, water repellency and crack resistance.

Indoor leveling mortar, inorganic gel material has a variety of additives, has good adhesion to natural mineral moldingDecorative walls are leveled with gypsum boardAvoid the use of cracks, plaster plaster, cracked cups, which will cause poor adhesion.

What material is used to level the walls? The seal is the floor plan of the body wall, which mainly consists of a microgypsum plaster powder suitable for restoring wall voids. combination, plaster, sand and plaster bottom walls thicken. repair mortar horizontal wall decoration should be at the base level.

That's all about:Decorative walls are leveled with gypsum boardI hope it will be useful to you.

You can get it for free