Which heating method is more comfortable, floor heating or radiators

Hello, the floor heating is better than the radiator heating method, and it is also clean.

I feel that the floor heating should be warmer, but now it is a natural gas wall-hung boiler, and the gas consumption is relatively large, but it is very warm.

If the underfloor heating and radiator are heated by boilers, then the gas cost is the main use cost. If the floor heating temperature is to rise, it will take 7-8 hours, that is, the floor heating cannot be turned off in winter. It used to be a radiator, now it is floor heating, this is not good to say, people build houses to be radiators, then our family is also, people are floor heating, then our family is also, you say that it is more energy-saving, I don't know what other places are like, we are all by square meters, so the energy saving is not reflected, for office workers do not matter, floor heating is just emerging in recent years to save space, strong concealment, and can be warmed, very applicable heating mode.

In recent years, the newly built residential houses have all used underfloor heating mode. Pipes are laid on the ground, and the heat is transferred to the floor through the pipes. The floor then dissipates heat to every corner of the room.

First of all, underfloor heating is a gradual and slow increase in the temperature of the area in the form of radiation from the underground, while radiators are achieved by increasing the temperature of the air in the area, and the effect is similar to that of air conditioning. The difference is that the heating comfort of floor heating is more energy-saving than radiators, and I personally think that floor heating is better! My house was built early, did not use floor heating, now use radiators, but also make do for office workers, floor heating is better, when the heating began, it costs some gas, after the pipes are hot.

The radiator is mainly heated by convection heat dissipation, it heats up quickly, and you can turn it off whenever you want. Floor heating is based on the whole ground as a heat dissipation surface, is mainly radiant heat dissipation, it heats up very slowly, it is generally not recommended to turn off, otherwise it heats up too slowly, so it is recommended to use it for users of central heating. As for the radiator, it seems that the interior is a little full.

The space is somewhat small. The advantage is that once there is any problem, it can be found and repaired in time. And the chance of repair is very high, and some can even be repaired by themselves.

Underfloor heating is a little more energy-efficient than radiators. And when using underfloor heating, we will remind the owner that if there is no one at home, it is best to keep the underfloor heating running at a low temperature, because this will wait for the owner to go home.

The effect of floor heating is better, and floor heating can make the whole room always be in a relatively warm effect, and it is particularly convenient.

In my opinion, floor heating is better, and the floor heating covers a larger area, and the home is more hygienic, and it is relatively simple and troublesome to do hygiene.

It must be that the underfloor heating effect is better, because the underfloor heating is laid in a larger range and the heat dissipation effect is also the best.

Radiators and floor heating are two common heating methods, they have their own advantages and disadvantages, and which way to choose should be decided according to the actual situation. However, many people say that radiators have been abandoned by the times and replaced by floor heating? So, which is better, radiator or underfloor heating?

How to choose the most suitable heating method for your home? Let's follow the golden flagship flag brother to find out.

Too long to see: Which is better, radiator or underfloor heating? How to choose the most suitable heating method for your home?

Radiators and floor heating are two common heating methods, they have their own advantages and disadvantages, and which way to choose should be decided according to the actual situation. The advantages of radiators are that they are easy to use, heat up quickly, and are relatively low in cost. The radiator is also relatively easy to install and maintain, and is suitable for small area home heating.

However, the disadvantage of radiators is that they are affected by the temperature of the water supply and cannot accurately control the indoor temperature. In contrast, underfloor heating has the advantage of heating the entire room evenly, without local temperatures being too high or too low. However, the installation and maintenance cost of floor heating is high, and ground laying and pipeline maintenance are required, which is suitable for large-area home heating.

Radiators and underfloor heating have their own advantages and disadvantages. You can choose the right type of heating according to your needs and preferences. If you're looking to raise the temperature of your room quickly and don't mind taking up space, radiators may be more suitable for you.

If you're more concerned about comfort and safety, and your budget allows, underfloor heating may be a better option.

1. What are the advantages and disadvantages of radiators?

Advantages of radiators:

It is easy to install and suitable for a house that has already been renovated.

The heating rate is fast, which can quickly increase the indoor temperature.

The temperature of each room can be controlled independently, and the flexibility is high.

It is easy to maintain, and only needs to clean the radiator regularly.

Disadvantages of radiators:

Occupies indoor space and may affect the aesthetics of the room.

Air convection can cause dryness in the room.

Noise is generated when heated, which may affect the quality of sleep.

2. What are the advantages and disadvantages of floor heating?

Advantages of underfloor heating:

Comfort is high as the heat is transferred upwards from the ground and feels more natural.

The room can be heated evenly without creating room temperature differences.

For families with elderly and small children, underfloor heating is safer because they can move freely on the ground.

Underfloor heating can be combined with other heating methods (such as air conditioning) to improve energy efficiency.

Disadvantages of underfloor heating:

The installation cost is high, and it needs to be taken into account when decorating.

The heating rate is slower and it takes a certain amount of time for the room to warm up.

Maintenance costs are high, and underfloor heating pipes need to be cleaned and replaced regularly.

For houses that have already been renovated, installing underfloor heating may require a floor remodel.

3. Which is better, radiator or floor heating?

Radiators and underfloor heating have their own advantages and disadvantages. You can choose the right heating method according to your needs and preferences. If you're looking to raise the temperature of your room quickly and don't mind taking up space, radiators may be more suitable for you.

If you're more concerned about comfort and safety, and your budget allows, underfloor heating may be a better option.

1. The difference in comfort.

Floor heating has always been considered one of the more comfortable heating methods, people first feel the temperature is the soles of the feet, so in winter can not only provide warmth to people, but also can play a good role in improving the blood circulation of the human body, which is conducive to human health. There are two types of radiators: water heating and electric heating: water heating burns steam or hot water through the boiler and transmits heat to the radiator through the pipe; Electric radiators heat the water or oil in the radiator by heating the electric heating element in the radiator, and then the heat is transported by the radiator.

The working principle of radiators is to form a convection flow with the cold air in the house by heating the nearby air, the cold air is circulated and heated, and the hot air is circulated and flowing. There will be a feeling that it is closer to the radiator, warmer and farther away, or not warmer.

2. The difference in aesthetics.

Floor heating is a hidden project, and the overall home design of the home is not affected, and the aesthetics are not affected under normal circumstances. However, if the indoor floor height is not enough, it will cause the house to be very oppressive and cause a bad impact on the overall visual beauty. Radiators will also occupy a certain position in the home, especially near the radiators to leave a distance to ensure that they are not affected by direct heating, which can be a bit troublesome when designing.

However, at present, the new radiator will not affect the aesthetics of the interior decoration through its beautiful appearance, but can play a role in setting off to a certain extent.

3. The difference in heating rate.

Underfloor heating is slower and generally needs to be turned on for a long time to achieve optimal comfort. Because the floor heating uses low-temperature hot water radiation, especially the wet floor heating, the cement mortar layer needs to be heated first. The heat dissipation is slower, and the underfloor heating lines are long, so it takes a certain process to heat the room.

The heating rate of the radiator is much faster than that of the floor heating, and you can feel the warmth after turning on the radiator for about half an hour. Intermittent heating is possible, which is more convenient.

4. The difference in the ease of installation.

The amount of floor heating project is huge, in addition to the laying of floor heating pipes, a variety of leveling technologies are also required, and only the rough house can install floor heating. There are two kinds of floor heating: wet floor heating and dry floor heating, water floor heating is installed in the floor layer, which needs to be poured concrete, and dry floor heating can be laid directly under the floor. There are two ways to install radiators, both open and concealed, and both can be used in the blank room.

If you choose concealed installation, the construction is slightly more complicated, because the concealed pipes need to be hidden. The house that has been renovated can only choose to be surface-mounted, the advantage is that the construction period is short, but it is convenient and fast.

6. The difference between maintenance and service life.

Floor heating is a durable product, with a long service life, and the service life is basically synchronized with the building, but the floor heating is laid under the floor, and it is quite troublesome to repair. The service life of steel radiators is about 5-15 years, and the service life of copper-aluminum composite radiators is basically more than 20 years. The radiator is also relatively simple in terms of maintenance, if you need to clean it after blockage, open the slipknot and let it through, and only need to change the pipe fittings if it leaks.

If you use a steel radiator, you need to maintain it with full water to ensure that the oxygen content of the heating is low and reduce corrosion. Copper-aluminum composite radiators do not need to be fully watered for maintenance.

I can't say which is hot, whether it is hot or not depends on many factors such as heating temperature, both have their own advantages and disadvantages, to put it simply, floor heating heat dissipation is comfortable, but it is more suitable for rough houses, and the decorated house is not suitable, because it is more troublesome to pry open the floor, installation and maintenance. The installation of radiators is relatively simple, so depending on your actual situation and needs, Rubens Heating hopes to help you.

Heating is a very important thing in our winter, so when we are at home. People will also pay special attention to this issue. Some people will encounter things that we choose.

So you have to have a good comparison. This helps us to make better choices. When decorating at home, we all encounter the problem of our choice of underfloor heating and radiators.

Let's take a look at it with usunderfloor heating and radiators which are warm

1. Which is warmer, floor heating or radiator?

1. Let's first understand our installation effect, floor heating is a hidden system, and there is no space. The floor heating pipes are buried in the ground, which does not affect the wall decoration and the placement of furniture, and is not restricted by whether the wall can fix the supports. Under normal circumstances, the height of wet floor heating should be increased by 8cm.

2. Let's understand the heating effect, the heat dissipation method of floor heating is mainly radiant heating, which is also our principle. The heat is evenly radiated from the bottom to the top, in line with ergonomics, the temperature of the same level of the room is uniform, the temperature difference is small, so that people feel that the head is hot and the head is cold, and the temperature difference at the same level is large, this phenomenon is especially obvious in the large space room. Due to this heating convection method, the hot air is convection from top to bottom, and the room temperature is hot at the top and cool at the bottom, and the comfort is relatively poor, but it is better than the heating of air conditioning.

3. Finally, the thermal efficiency of floor heating is low-temperature hot water radiation, the specific heat of water is larger, and the effect is also very good, so the floor heating is slower, especially when it is turned on for the first time, it takes a long time for the temperature of the whole house to rise, so the floor heating is generally open for 24 hours. The radiator temperature is high, and the room temperature begins to rise in a moment, and it will be better for short-term heating users to choose radiator heating.

Second, which brand of floor heating is good.

1. Let's first learn about Emerson, founded in 1890, a Fortune 500 company, which is also a very good product. No. 2 in the global industrial electronics industry, R&D and production of various comfortable, safe and reliable commercial, industrial and household heating cables. The application of the Lingling Hall involves household geothermal heat, roof snow melting, and pipe heating.

American UL certification, IEC800 international electrotechnical standard and other certifications.

2. There is also our German Hanks, which is the world's leading heating cable. It is also very famous in the industry. Product manufacturers and service providers, heating projects all over Northern Europe and Russia and other places, its floor heating products are widely sold in more than 80 countries and regions in the world, is the world's largest electric floor heating products sales company.

Therefore, it is very popular with consumers all over the world.

3. Anze's brand is also very good, and Anze is a collector of electric heating appliances. It deserves everyone's affirmation. A high-tech enterprise integrating R&D, manufacturing and sales of temperature sensors and thermostats.

The product research and development capability ranks first in the same industry in China, and the TXLP process, implicit splicing and other workers' prudence are at the international forefront level.

After the above comparison, I believe you will understand more clearly. This is also a great help for our choice. Let's choose the best product. Contribute to our better use. Give us a good environment.