The automatic washing machine understands how to use the automatic washing machine

No matter how much laundry you add to the automatic washing machine, it will wash the clothes according to the set program, so if you add too much laundry detergent, it may cause the clothes to not be cleaned!

Connect the water pipe and power it doesn't matter.,Since it's all fully automatic, it means that you only need to put things on the line.,You don't have to worry about anything else.,You just have to wait.。。 Remember to put laundry detergent, otherwise it will not be clean. I got used to it for a few days.

It's easy to use, trust me. You can't go wrong, it's fully automatic and easy to use.

Turn on the faucet, turn on the power, put the laundry detergent or laundry detergent into the detergent card slot, put the clothes, press the washing machine switch, adjust the mode and water volume if you need to adjust it, and start directly if you don't need it. Then you just need to sit and wait, the power will be automatically cut off after washing, and the washing time is different in different modes.

It's best to soak for 20 minutes first, and you don't need to put a lot of laundry.

Once the fully automatic washing machine is plugged in, it is also necessary to press Start to fill the water, and then press Start. Then leave him alone

The automatic washing machine is to highlight the automatic function, connect the water pipe to power, and then set the amount of water, put in the clothes, add laundry detergent, since it is fully automatic, it means that you only need to put things on the line, you don't have to care about anything else, you just have to wait. Remember to put laundry detergent, otherwise it will not be clean. I got used to it for a few days.

It's easy to use, trust me. You can't go wrong, it's fully automatic and easy to use.

Summary. Hello, 1. Connect the power supply at the beginning, connect the water inlet pipe, put the clothes to be washed into the washing machine, and pour a certain amount of washing powder. 2. Secondly, according to the number of clothes, washing method, etc., choose the appropriate washing button.

3. Finally, when it is washed, after it is set, press the turn button, and it can automatically enter the water to clean the clothes.

Hello, 1. Connect the power supply at the beginning, connect the water inlet pipe, put the clothes to be washed into the washing machine, and pour a certain amount of laundry detergent. 2. Secondly, according to the number of clothes, washing methods, etc., choose the washing button suitable for eggplant oranges. 3. Finally, when it is washed, after it is set, press the open button, and at this time, it will automatically enter the water to clean the clothes.

I'm still a little confused, can you be more detailed?

Precautions for the use of automatic washing machine 1, when using the washing machine, the amount of washing should be determined according to the amount of clothing and dirt, such as the manuscript to clean large pieces of fabric, you can use chemical fiber or standard steps to clean, if it is summer clothes, very light, you can use weak washing steps to clean. It is not easy to damage the clothes, and it will also cause the situation that the clothes are not clean.

Summary. 1 4 Step by step reading Put the clothes in the washing machine, connect the water inlet pipe, plug in the power supply, turn on the faucet and put the water. 2 4 Pour in laundry detergent or laundry detergent, select the washing method, washing and spinning times, rinsing time, and start the washing machine.

3 4 Wait for the clothes to be washed, and then take out the clothes. 4 4 is summarized below.

How to use an automatic washing machine.

1 4 Step by step reading Put the clothes in the washing machine, connect the water inlet pipe, plug in the power supply, turn on the faucet and put the water. 2 4 Pour in laundry detergent or laundry detergent, select the washing method, washing and spinning times, rinsing time, and start the washing machine. 3 4 Wait for the clothes to be washed, and then take out the clothes.

4 4 is summarized below.

Can you tell us more about that?

Hello, 1 4 step by step reading Put the clothes in the washing machine, connect the water inlet pipe, plug in the power, turn on the faucet and put the water. 2 4 Pour in laundry detergent or laundry detergent, select the washing method, washing and spinning times, rinsing time, and start the washing machine. 3 4 Wait for the clothes to be washed, and then take out the clothes.

4 4 is summarized below.

Automatic washing machine usage is as follows:Tools Material: Haier drum automatic washing machine, laundry detergent, disinfectant.

1. First of all, connect the socket of the Haier drum washing machine.

2. Then open the laundry detergent box of Haier drum washing machine.

3. After that, pour laundry detergent into the main sink of the laundry detergent addition box.

4. Then pour disinfectant into the disinfection tank of the laundry detergent box.

5. Then close the laundry detergent box of the Haier drum washing machine.

6. Secondly, on the panel of Haier drum washing machine, click the "Start Adding Clothes" button.

7. Finally, the Haier drum washing machine began to be cleaned.

Introduction: The automatic washing machine is indeed a good helper in our life, saving us a lot of time. So how do you use a fully automatic washing machine? Here's how to use the fully automatic washing machine I put together for you, I hope it will help you!

The emergence of washing machines has freed many housewives from the trouble of washing clothes all day, and with the development of science and technology, automatic washing machines have successfully entered thousands of households, allowing many women to completely get rid of the trouble of washing clothes. However, many news reports that some friends do not know how to use the automatic washing machine, which causes some failures in the washing machine, and even causes some personal injuries.

In fact, it is very dangerous not to know how to use the washing machine correctly, for example, if you reach into it when the washing machine drum has not completely stopped, it is easy to cause injury, so it is very important to use automatic washing clothes correctly to wash clothes.

Fully automatic washing machines generally use a tactile switch, and when the switch is pressed, the indicator light next to the character will turn on. When the indicator light is on, the program is selected, the indicator light flashes to indicate that the program is being executed, and the indicator light is off to indicate that the program is not selected or executed.

Automatic computerized washing machine dehydration (automatic or manual adjustment of the washing machine button to), then the dehydration indicator flashes, then the computer controls the power supply and drain valve, then the drain valve starts to drain, and then the drain drives the clutch to change (release the clutch spring) while draining

After about 3 minutes, the computer defaults to the water release time, and then the computer detects the opening and closing signal of the washing machine panel door. (It is not closed, and the alarm prompt is indicated by beeping "beep".) stop dehydration).

Positive power is supplied to the washing machine motor, then the washing machine rotates, and then the clutch pulley is driven by the belt, and then the clutch core rotates to drive the released clutch spring to tighten.

The barrel in the washing machine rotates for about 30s to stop, and then the computer controls the power supply to the washing machine motor repeatedly for 30s to stop, and then supplies power 2 times. (Adjust the bucket of laundry in the washing machine evenly.) ）

The continuous power supply motor is dehydrated for about 3 minutes. Stop, and then during the rotation of the inner barrel, the computer has been detecting the state of the door switch on, (artificially opening the washing machine panel door or the contact is not good, the inner barrel shaking amplitude is too large and touches the disconnection door switch will stop dehydration.) When the door switch rotates more than 3 times during the inner barrel, the rinse procedure begins.

From the water first, wash, followed by a buzzer beeping. (indicates that the dehydration is complete), and then only the panel indicator light of the washing machine is on. (There is AC power-off function for washing machines AC power-off), and then complete the whole dehydration process.

First, the working principle of the automatic washing machine.

Schematic diagram of automatic washing machine After the washing machine is connected to the power supply and water source, the corresponding water level, program and function on the computer board are selected according to the number, type and degree of pollution of the clothes, and the washing machine starts to work with water by pressing the start button, and the motor decelerates through the V-belt and transmits the power to the clutch, and then the clutch decelerates twice to drive the wave wheel to rotate in the positive and reverse directions to drive the water movement. The moving water flow drives the clothes to turn up, down, left and right constantly, so that between the clothes, between the clothes and the barrel wall, gently rub in the water, and realize decontamination and cleaning under the action of detergent.

Second, the use of automatic washing machine.

After the automatic washing machine is correctly installed, the specific operation and use methods are as follows:

1) Before washing, be cautious and check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, take them out.

2) Turn on the power plug, put down or connect the drain pipe, turn on the tap and put the laundry, washing powder and additives (softener, bleach, etc.) into the washing machine, and close the cover.

3) Press the power switch, select the water level according to the amount of laundry to be washed, and select the program according to the specific conditions such as the dirty stroke degree and material of the laundry.

4) Press the "Start Pause" button and the washing machine starts working.

5) When the selected program finishes working, the buzzer will beep.

6) After the work, turn off the power switch, pull the power plug out of the socket, close the tap water, then open the cover, take out the laundry, clean the wire crumb filter bag, and wipe the washing machine dry.

3. Precautions for the use of automatic washing machines

Automatic washing machine 1, when the "washing" or "rinsing" program is selected, the wave wheel will not run until the selected water level; During the dehydration procedure, the lid must be closed and should not be opened from time to time.

2. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger.

3. Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents.

4. When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem has not been solved after 2 corrections, it will stop and alarm, at this time, the cover should be opened, the clothes that are squeezed on one side should be placed evenly, and then the cover should be closed, and the "start pause" button can be pressed.

5. When using hot water for washing, the water temperature should not exceed 50, and at the same time, water splashing should be avoided to wet the control board, so as to avoid the internal electrical parts from being burned due to water; When the temperature is low in winter, it is easy to freeze the washing machine, at this time, you can use warm water below 50 to soak for a period of time, so that the washing machine can be thawed before use.

Washing machine is a cleaning appliance that uses electrical energy to produce mechanical action to wash clothes, and is divided into two categories according to its rated washing capacity: household and collective. I have carefully sorted out the method of automatic washing machine for you, I hope it can be useful for you.

When using a fully automatic washing machine, it should be operated in the correct way, and the specific steps are as follows:

1. Plug in the power plug, put down or connect the drain pipe, turn on the tap of the water, put the detergent, washing powder and additives (softener, bleach, etc.) into the machine, and close the cover.

2. Press the power switch, select the appropriate water level according to the amount of washing, and select the appropriate washing program according to the specific conditions such as the degree of dirtiness and material.

3. Press the "Start Pause" button and the washing machine will start working.

4. After the selected program is executed, the buzzer will beep.

5. Turn off the power switch, pull the power plug out of the socket, turn off the faucet, then open the cover, take out the washing matter, and finally clean the wire scraps filter bag and wipe the washing machine dry.

In addition, the following points should be paid attention to during use:

1. When selecting the "washing" and "rinsing" programs, if the water level does not reach the set value, the wave wheel will not run.

2. When performing the dehydration procedure, the cover needs to be closed, and the cover should not be opened frequently.

3. Do not touch the washing and dehydration bucket to avoid being involved in danger.

4. Do not wash clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents.